Total Elbow Prosthesis (Left)

The Total Elbow Prosthesis (Left) is a system designed for Total Elbow Arthroplasty – TEA and reconstruction of the left elbow joint. It uses a set of compatible prosthetic components to replace and reconstruct the Humeral–Ulnar Articulation as part of an integrated surgical plan.

This version is specifically designed for the Left side and is available in two size options: Small and Large. These configurations provide the surgeon with alternatives during Preoperative Planning, Implant Sizing, and Intraoperative Assessment, according to the dimensions of the Distal Humerus, Proximal Ulna, and the patient’s specific anatomy.

The Total Elbow Prosthesis concept is based on the use of a Humeral Component and Ulnar Component extending into their respective intramedullary canals, with a central articulation region connecting the components and allowing functional movement of the artificial joint according to the system design.

The availability of different size configurations supports selection of the appropriate implant based on factors such as Bone Anatomy, Bone Stock, Component Fit, Joint Alignment, Soft-Tissue Condition, and intraoperative trialing results.

According to the supplied product table, the range includes two separate AMS Product Codes: AMS 105.200.001 for the Small Left configuration and AMS 105.200.002 for the Large Left configuration. This supports clear product identification, implant inventory management, and surgical preparation.

What Is a Total Elbow Prosthesis?

A Total Elbow Prosthesis is an Orthopedic Joint Replacement System used in Total Elbow Replacement / Total Elbow Arthroplasty procedures to reconstruct the major articular structures between the Humerus and Ulna.

The artificial joint generally consists of:

Humeral Component ↔ Articulation Interface ↔ Ulnar Component

These components function together to create the mechanical movement of the prosthetic joint during Flexion and Extension.

The current product is specifically designed for:

Left Elbow

and is available in:

Small | Large

Product Components and Design

1. Humeral Component

The component designed for the Distal Humerus.

Its design extends into the Humeral Canal and integrates with the remaining components of the Elbow Prosthesis.

2. Humeral Stem

The longitudinal portion of the Humeral Component, designed to extend within the Humeral Intramedullary Canal according to bone preparation and the approved surgical technique.

3. Ulnar Component

The component designed for the Proximal Ulna.

It functions together with the Humeral Component to form the opposite side of the Artificial Elbow Articulation.

4. Ulnar Stem

A stem section designed to extend within the Ulnar Intramedullary Canal according to the surgical system design.

5. Central Articulation Assembly

The articulating connection between the Humeral and Ulnar Components, responsible for creating movement between the components of the artificial joint.

The product image indicates the presence of a Mechanical Articulation Assembly; however, the supplied table does not officially define the system as:

• Linked
• Unlinked
• Hinged
• Semi-Constrained

Therefore, none of these classifications should be stated on the website without confirmation from the official Technical Datasheet.

6. Size-Specific Components

The system is available in two sizes:

• Small Left
• Large Left

providing different implant sizing options according to patient anatomy.

Product Application

The Total Elbow Prosthesis (Left) is used in Total Elbow Arthroplasty procedures involving the left upper extremity when the orthopedic surgeon determines that joint replacement is appropriate according to the approved clinical indications.

General surgical planning and use may include:

1. Preoperative Imaging & Planning
2. Assessment of Elbow Anatomy
3. Evaluation of the Distal Humerus and Proximal Ulna
4. Assessment of Bone Stock
5. Preparation of the intramedullary canals according to the approved Surgical Technique
6. Selection of the appropriate size:
   • Small
   • Large
7. Trial Component Placement
8. Evaluation of:
   • Component Fit
   • Implant Alignment
   • Flexion
   • Extension
   • Joint Stability
   • Soft-Tissue Balance
   • Range of Motion
9. Placement of the final Humeral and Ulnar Components
10. Completion of the Final Prosthetic Articulation

The implant size and method of use should be determined by a Qualified Orthopedic Surgeon in accordance with the approved IFU and Surgical Technique.

Key Benefits

Left-Specific Prosthesis

The product is specifically designated for the:

Left

side, providing a separate configuration for the left elbow within the product family.

Two Size Options

The system is available in:

Small – Large

providing two options during Implant Sizing.

Humeral–Ulnar Reconstruction

The system combines components designed for the Humerus and Ulna to create a Complete Prosthetic Elbow Construct.

Intramedullary Stem Components

The design incorporates stem components that extend within the intramedullary canals of both the humerus and ulna according to the system configuration.

Surgical Planning Flexibility

The availability of multiple sizes supports:

• Preoperative Planning
• Anatomical Assessment
• Implant Sizing
• Intraoperative Trialing
• Final Component Selection

Clear Implant Identification

Each size has an individual Product Code, facilitating:

• Implant Identification
• Surgical Set Preparation
• Procurement
• Inventory Management
• Stock Control

Technical Specifications

Product Code	Product Description	Side	Size
AMS 105.200.001	TOTAL ELBOW SMALL LEFT	Left	Small
AMS 105.200.002	TOTAL ELBOW LARGE LEFT	Left	Large

Technical Overview

Product Name: Total Elbow Prosthesis (Left)
Product Type: Total Elbow Replacement System
Procedure: Total Elbow Arthroplasty – TEA
Anatomical Application: Elbow Joint
Laterality: Left
Available Sizes: Small / Large
Number of Configurations: 2
Primary Prosthetic Components: Humeral & Ulnar Components
Functional Concept: Humeral–Ulnar Prosthetic Articulation
Stem Concept: Intramedullary Stem Components
Selection Method: Preoperative Planning & Intraoperative Sizing
Identification: Individual AMS Product Code for each size

Product Features

• Total Elbow Replacement System designed for the left side
• Designed for Total Elbow Arthroplasty – TEA
• Incorporates compatible Humeral and Ulnar Prosthetic Components
• Provides a Humeral–Ulnar Artificial Articulation
• Includes Intramedullary Stem Components
• Available in Small and Large sizes
• Allows implant size selection according to Elbow Anatomy
• Supports Preoperative Planning
• Provides options during Intraoperative Trialing
• Supports assessment of Component Fit and Alignment
• Allows evaluation of Flexion and Extension after formation of the trial construct
• Specifically designed for Left Elbow Anatomy
• Individual AMS Code for each size
• Facilitates Implant Identification during surgical preparation
• Supports Surgical Set Preparation and Inventory Management
• Suitable for Procurement and Stock Control due to clearly defined product codes and sizes