Modular Heads Standard [TIT]

The Modular Heads Standard [TIT] are key articulating components of the Humeral Side within compatible Shoulder Replacement / Shoulder Arthroplasty systems. The modular head is assembled onto the Compatible Humeral Stem to form the articulating portion of the Humeral Prosthetic Construct.

The product is based on a Modular Design Concept that allows selection of the appropriate head size and connection to the compatible humeral stem within the system. This provides flexibility during Preoperative Planning, Intraoperative Trialing, and selection of the final shoulder prosthesis configuration.

According to the supplied product data, the range is available in three sizes: 40 mm, 42 mm, and 44 mm, with a consistent 2 mm increment between consecutive sizes. This graduated range provides different options when evaluating Humeral Head Sizing, Joint Geometry, Soft-Tissue Tension, Component Positioning, and compatibility with the other system components.

The product carries the designation [TIT], indicating a Titanium Material Category in the product nomenclature. However, the supplied table does not specify the exact Titanium Grade or Alloy Specification.

Each size carries an individual AMS Product Code, facilitating Implant Identification, Procurement, Surgical Set Preparation, Inventory Management, and Stock Control.

What Are Modular Heads Standard [TIT]?

A Modular Humeral Head is a prosthetic component that forms the artificial articulating surface of the humeral head within a Shoulder Replacement System.

It is assembled onto the compatible Humeral Stem through a dedicated Modular Connection, becoming part of the humeral side of the prosthetic shoulder joint.

The external surface of the head functions as an Articulating Surface within the Shoulder Prosthetic Construct, while its internal interface provides the connection point with the compatible Humeral Component.

The product is available in:

• 40 mm
• 42 mm
• 44 mm

Product Components and Design

1. Modular Humeral Head Body

The main body of the implant, designed with an articulating geometry to form the prosthetic portion of the humeral head.

It is available in three different sizes according to the supplied product table.

2. TIT Material Category

The product is identified as:

Modular Heads Standard [TIT]

The designation TIT indicates a Titanium Material Category according to the product nomenclature.

However, the exact titanium type or Alloy Grade is not specified in the supplied product table.

3. Articulating Surface

The external surface of the head is designed to function as a Prosthetic Articular Surface within shoulder joint reconstruction.

Specific details regarding the Surface Finish or Surface Roughness are not provided in the available product data.

4. Internal Modular Interface

The product incorporates a Central Internal Connection Feature designed to connect with the compatible Humeral Stem.

The specific Taper Type, dimensions, and Locking Mechanism are not specified in the supplied table.

5. Standard Head Geometry

The product is classified within the Standard Modular Heads range of the shoulder replacement system and is available in three different size options.

Product Application

The Modular Heads Standard [TIT] are used within compatible:

Shoulder Arthroplasty / Shoulder Replacement Systems

After preparation and placement of the compatible Humeral Stem, the appropriate Modular Head Size is selected according to:

• Proximal Humeral Anatomy
• Humeral Stem Compatibility
• Shoulder Joint Geometry
• Soft-Tissue Tension
• Component Positioning
• Joint Stability
• Range of Motion
• Intraoperative Trialing

The Final Modular Head is then assembled according to the approved Surgical Technique of the system.

The product should be selected and used by a Qualified Orthopedic Surgeon in accordance with the approved IFU and Component Compatibility requirements.

Key Benefits

Modular Design

The Modular Design allows selection of the appropriate head size and connection to the compatible Humeral Stem.

Three Available Sizes

The product is available in:

40 / 42 / 44 mm

providing a graduated range of Humeral Head Sizing options.

2 MM Size Progression

The available sizes increase in consistent:

2 mm increments

between consecutive sizes.

Titanium Category

The product is classified as [TIT] in the supplied company data, placing it within the Titanium-Based Product Category according to the catalogue nomenclature.

Shoulder Reconstruction Flexibility

The availability of multiple sizes provides additional options during:

• Preoperative Planning
• Intraoperative Trialing
• Component Sizing
• Final Head Selection

Clear Product Identification

Each size carries an individual AMS Code, facilitating:

• Implant Identification
• Surgical Set Preparation
• Procurement
• Inventory Management
• Stock Control

Technical Specifications

Product Code	Product	Size / Total Length as Listed
AMS 104.200.040T	Modular Heads Standard [TIT]	40 mm
AMS 104.200.042T	Modular Heads Standard [TIT]	42 mm
AMS 104.200.044T	Modular Heads Standard [TIT]	44 mm

Technical Overview

Product Name: Modular Heads Standard [TIT]
Product Type: Modular Humeral Head
Product Category: Shoulder Arthroplasty Component
Application: Shoulder Replacement System
Material Category: TIT / Titanium Category according to supplied product data
Design: Standard Modular Head
Available Sizes: 40 / 42 / 44 mm
Size Range: 40–44 mm
Size Increment: 2 mm
Number of Configurations: 3
Functional Role: Humeral Articulating Component
Component Interface: Compatible Humeral Stem
Identification: Individual AMS Product Code for each size

Product Features

• Standard Modular Humeral Head Design
• Designed for use within compatible Shoulder Replacement Systems
• Classified as TIT according to the supplied product data
• Available in 3 different sizes
• Sizes: 40, 42, and 44 mm
• Consistent 2 mm size increments
• Functions as part of the Humeral Prosthetic Construct
• Provides the Articulating Surface of the humeral side
• Incorporates a Modular Interface for connection with the compatible Humeral Stem
• Supports Preoperative Planning
• Provides options during Intraoperative Trialing
• Supports selection of the Final Humeral Head Size according to shoulder reconstruction requirements
• Individual AMS Code for each size
• Facilitates Implant Identification and Surgical Set Preparation
• Supports Inventory Management, Procurement, and Stock Control