Orthopedic Fixation Wires – Cat. No. AMS 602.215 are a range of Surgical Bone Fixation Wires designed for use in orthopedic procedures requiring a straight wire in different diameters and lengths for fixation, guidance, or support of an Orthopedic Fixation Construct, according to the indications and Surgical Technique of the system being used.
The range includes three different diameters: 1.5 mm, 1.8 mm, and 2.0 mm. Each diameter is available in two lengths: 300 mm and 400 mm, resulting in a total of 6 Product Configurations.
This variation in Wire Diameter and Wire Length allows the surgical team to select the appropriate configuration based on Bone Anatomy, Fixation Site, Required Trajectory, Required Working Length, and the nature of the surgical procedure.
The product family is listed under the general reference AMS 602.215, while each Diameter / Length Combination carries an individual product code, supporting accurate Product Identification, Surgical Set Preparation, Procurement, Inventory Management, and Stock Control.
The appropriate wire should be selected and used by a Qualified Orthopedic Surgeon in accordance with the approved IFU and Surgical Technique.
Product Description
An Orthopedic Fixation Wire is a thin, straight metallic surgical wire used within various bone fixation systems and orthopedic procedures according to the product design and its approved Clinical Indications.
The wire may function as an element in:
- Bone Fixation
- Temporary Fixation
- Bone Fragment Positioning
- Surgical Guidance
- Alignment Assistance
- Orthopedic Fixation Constructs
Wire selection is based primarily on two parameters specified in the product range:
Wire Diameter
Available in:
Ø1.5 mm – Ø1.8 mm – Ø2.0 mm
Wire Length
Available in:
300 mm – 400 mm
This allows the appropriate Diameter and Length to be selected according to the requirements of the procedure and bone anatomy.
Product Components and Design
- Wire Shaft
The main longitudinal body of the wire, designed with a straight geometry to provide an appropriate Working Length during use.
- Distal End
The distal end of the wire intended for interaction with bone according to the applicable Surgical Technique.
The exact Tip Geometry is not specified in the provided table. Therefore, it should not be classified as Trocar, Drill Point, or any other specific tip design without an official technical document.
- Proximal End
The proximal end that may be handled using a compatible Wire Driver or Instrument within the fixation system.
The specific Instrument Interface is not identified in the currently available product information.
- Diameter-Specific Geometry
The range is available in three diameters:
- 1.5 mm
- 1.8 mm
- 2.0 mm
providing different options according to fixation requirements.
- Length-Specific Geometry
Each diameter is available in two lengths:
- 300 mm
- 400 mm
providing different Working Length Options.
Product Use
These Orthopedic Fixation Wires are used in compatible surgical procedures requiring a Wire Fixation or Guidance Element.
General applications, subject to the approved product IFU, may include:
- Temporary Bone Fixation
- Bone Fragment Stabilization
- Alignment Assistance
- Guide Wire Applications when included within the approved indications
- Orthopedic Pinning / Wire Fixation according to the fixation system
- Support during selected Internal or External Fixation Procedures
Selection of the appropriate configuration depends on:
- Bone Anatomy
- Bone Dimensions
- Fixation Site
- Wire Trajectory
- Required Diameter
- Required Working Length
- Surgical Approach
- Intraoperative Assessment
Key Benefits
Multiple Diameter Options
The range provides three diameters:
Ø1.5 / Ø1.8 / Ø2.0 mm
to accommodate different requirements during Wire Selection.
Two Length Options
Each diameter is available in:
300 / 400 mm
providing greater flexibility when selecting the required Working Length.
Six Product Configurations
The product family includes:
3 Diameters × 2 Lengths = 6 Configurations
Flexible Surgical Selection
The availability of different diameters and lengths allows selection of the appropriate Wire Configuration according to anatomy and the surgical procedure.
Structured Product Range
The progressive sizing system facilitates comparison and selection of the appropriate wire within the same Product Family.
Clear Product Identification
Each configuration carries an individual Cat. No., supporting:
- Product Identification
- Surgical Set Preparation
- Procurement
- Inventory Management
- Stock Control
Technical Specifications
| Diameter | Length | Cat. No. |
| Ø1.5 mm | 300 mm | AMS 602.215.300 |
| Ø1.5 mm | 400 mm | AMS 602.215.400 |
| Ø1.8 mm | 300 mm | AMS 602.218.300 |
| Ø1.8 mm | 400 mm | AMS 602.218.400 |
| Ø2.0 mm | 300 mm | AMS 602.220.300 |
| Ø2.0 mm | 400 mm | AMS 602.220.400 |
Technical Overview
Product Family: Orthopedic Fixation Wires
General Cat. No.: AMS 602.215
Product Category: Surgical Bone Fixation Wire
Available Diameters: Ø1.5 / Ø1.8 / Ø2.0 mm
Diameter Range: 1.5–2.0 mm
Available Lengths: 300 / 400 mm
Configurations per Diameter: 2
Total Configurations: 6
Selection Variables: Diameter & Length
Primary Application: Orthopedic Fixation / Guidance according to approved indications
Identification: Individual Cat. No. for every Diameter / Length combination
Product Features
- Straight Orthopedic Fixation Wire Design.
- Designed for compatible Orthopedic Surgery applications.
- Available in three different Wire Diameters.
- Diameter range from Ø1.5 to Ø2.0 mm.
- Two length options: 300 and 400 mm.
- Total of 6 Product Configurations.
- Provides multiple options during Wire Selection.
- Allows Diameter selection according to Bone Anatomy and procedural requirements.
- Allows selection of the required Working Length according to the Surgical Approach.
- Supports Preoperative Planning.
- Provides options during Intraoperative Selection.
- May be used within compatible Fixation / Guidance Applications according to the IFU.
- Individual Cat. No. for each Diameter / Length Combination.
- Facilitates Product Identification and Surgical Set Preparation.
- Supports Procurement, Inventory Management, and Stock Control.
Reviews
There are no reviews yet.