The Lateral Mass Cervical Plate (15 mm) is a titanium spinal fixation implant designed for use within compatible cervical spine internal fixation systems. Its multi-hole plate geometry provides multiple screw fixation points for constructing a lateral mass cervical fixation assembly according to the approved indications, anatomical requirements, and surgical technique.
The plate features an elongated, straight configuration with fixation holes distributed along its longitudinal axis. These openings are intended to accommodate compatible cervical fixation screws and allow selection of the appropriate plate configuration based on the number of required fixation points and the targeted cervical levels.
According to the supplied catalog information, the implant material is:
Material: Titanium
The product family is listed under:
Cat. No.: AMS 514.015.000
The system includes seven configurations, ranging from 2 holes to 8 holes, providing several options for implant selection according to cervical anatomy, number of fixation points, targeted vertebral levels, required plate coverage, and intraoperative planning.
Each configuration has an individual Cat. No. and GTIN No., supporting accurate implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.
Product Explanation
The Lateral Mass Cervical Plate is a spinal fixation plate designed to function as part of a compatible cervical plate-and-screw stabilization construct.
A simplified fixation concept can be represented as:
Cervical Vertebrae → Compatible Cervical Screws → Lateral Mass Cervical Plate → Cervical Fixation Construct
The multiple fixation holes along the plate allow different construct configurations based on the number and position of the vertebral segments included in the surgical plan.
The catalog identifies this specific product as:
Lateral Mass Cervical Plate (15 mm)
The supplied data does not define precisely what the 15 mm dimension represents. It should therefore not be described as plate width, hole spacing, or another specific measurement without confirmation from the official technical documentation.
Product Components and Design
- Titanium Plate Body
The primary structural element of the implant is manufactured from Titanium, according to the supplied catalog.
The plate body provides the structural interface for the cervical screw fixation construct.
- Multiple Fixation Holes
The product family is available with:
- 2 Holes
- 3 Holes
- 4 Holes
- 5 Holes
- 6 Holes
- 7 Holes
- 8 Holes
These openings serve as fixation interfaces for compatible cervical screws.
- Straight Multi-Hole Geometry
The plate has an elongated straight configuration with fixation openings positioned along its longitudinal axis.
This geometry provides multiple construct options within the same product family.
- Contoured Plate Profile
The supplied image shows a contoured external profile surrounding the fixation holes.
The exact anatomical contour, curvature, plate thickness, and bending characteristics are not specified in the provided data.
- Configuration-Specific Design
Each plate variant is defined by the number of holes and carries an individual product code and GTIN number.
Intended Use
The Lateral Mass Cervical Plate (15 mm) is intended for use within compatible cervical spine fixation systems, according to the manufacturer’s approved indications and Instructions for Use.
Potential applications, where included in the approved indications, may include:
- Cervical spine stabilization.
- Lateral mass fixation constructs.
- Cervical plate-and-screw fixation.
- Multi-level cervical fixation.
- Cervical spinal reconstruction.
- Internal stabilization of appropriate cervical vertebral segments.
Selection of the appropriate plate configuration depends on:
- Cervical anatomy.
- Number of required fixation points.
- Targeted vertebral levels.
- Screw positioning.
- Required plate coverage.
- Bone quality.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified spine surgeon in accordance with the approved surgical technique and IFU.
Key Benefits
Titanium Material
The supplied catalog specifies:
Material: Titanium
Multiple Hole Configurations
The plate is available in:
2H / 3H / 4H / 5H / 6H / 7H / 8H
providing multiple options for different fixation constructs.
Seven Product Configurations
The product family includes:
7 individual configurations
within one cervical plate system.
Multi-Point Fixation Geometry
The plate incorporates several screw fixation interfaces distributed along its length.
Cervical Construct Flexibility
Different hole counts allow implant selection according to the number of required fixation points and the planned cervical construct.
Structured Implant Identification
Each configuration has an individual Cat. No. to support:
- Implant identification.
- Surgical set preparation.
- Procurement.
- Inventory management.
Product Traceability
Each variant has an individual GTIN No. to support:
- Product traceability.
- Inventory tracking.
- Stock control.
- Supply chain management.
Technical Specifications
| No. of Holes | Cat. No. | GTIN No. |
| 2H | AMS 514.015.002T | 6221361043701 |
| 3H | AMS 514.015.003T | 6221361043718 |
| 4H | AMS 514.015.004T | 6221361043725 |
| 5H | AMS 514.015.005T | 6221361043732 |
| 6H | AMS 514.015.006T | 6221361043749 |
| 7H | AMS 514.015.007T | 6221361043756 |
| 8H | AMS 514.015.008T | 6221361043763 |
Technical Overview
Product Name: Lateral Mass Cervical Plate (15 mm)
Material: Titanium
Product Type: Cervical Spine Fixation Plate
Product Category: Spinal Internal Fixation Implant
General Cat. No.: AMS 514.015.000
Available Configurations: 2H / 3H / 4H / 5H / 6H / 7H / 8H
Number of Configurations: 7
Design: Straight Multi-Hole Cervical Plate
Fixation Concept: Plate-and-Screw Cervical Fixation
Anatomical Application: Cervical Spine
Identification: Individual Cat. No. and GTIN No. for each configuration
Product Features
- Lateral Mass Cervical Plate Design.
- Manufactured from Titanium according to the catalog.
- Designed for compatible cervical spine fixation systems.
- Straight multi-hole plate geometry.
- Available in 2H through 8H configurations.
- Total of 7 product configurations.
- Provides multiple screw fixation interfaces.
- Supports different multi-point cervical fixation constructs.
- Provides multiple options for preoperative implant selection.
- Supports intraoperative configuration selection according to anatomy and surgical requirements.
- Individual Cat. No. for each hole configuration.
- Individual GTIN No. for each variant.
- Supports implant identification, product traceability, procurement, and inventory management.
Reviews
There are no reviews yet.