The Cervical Cage Large is a spinal interbody implant manufactured from PEEK, designed for use within compatible cervical spine fixation and interbody fusion systems according to the manufacturer’s approved indications and surgical technique.
The implant features a compact cage geometry with a central open structure and textured contact surfaces visible in the supplied product image. This configuration is designed to function as an interbody component between the targeted cervical vertebral segments as part of an appropriate spinal construct.
According to the supplied catalog information, the implant material is:
Material: PEEK
The product family is listed under:
Cat. No.: AMS 511.014.000
The Cervical Cage Large is available in seven listed configurations ranging from 3 mm to 9 mm, in regular 1 mm increments. This range provides multiple options for implant selection based on cervical anatomy, intervertebral space requirements, implant fit, and intraoperative assessment.
Each configuration is assigned a dedicated Cat. No. and GTIN No., supporting accurate implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.
Product Explanation
The Cervical Cage Large is an interbody spinal implant designed to be positioned within the cervical intervertebral space as part of a compatible cervical stabilization or fusion construct.
A simplified construct can be represented as:
Cervical Vertebral Body → Cervical Cage → Adjacent Vertebral Body → Cervical Interbody Construct
The cage is selected according to the anatomical dimensions of the prepared intervertebral space and the surgical plan.
The catalog specifically identifies this product as the:
Cervical Cage Large
indicating that it belongs to the Large configuration within the cervical cage product family.
Product Components and Design
- PEEK Cage Body
The main structural component is manufactured from PEEK, according to the supplied catalog.
The cage body provides the principal implant geometry for placement within the cervical intervertebral space.
- Central Openings
The product image shows large central openings within the cage body.
These openings form part of the implant geometry and may accommodate compatible graft material where permitted by the approved surgical technique.
The exact graft volume is not specified in the supplied data.
- Textured / Serrated Contact Surfaces
The superior surface visible in the product image appears to incorporate a textured or serrated profile.
The exact tooth geometry, surface dimensions, and anti-migration characteristics are not specified in the catalog data.
- Compact Interbody Geometry
The implant has a compact rectangular / rounded interbody cage configuration designed for placement within the cervical spinal segment.
Exact footprint dimensions are not provided.
- Listed Size Configurations
The supplied table lists:
- 3 mm
- 4 mm
- 5 mm
- 6 mm
- 7 mm
- 8 mm
- 9 mm
providing seven product configurations.
Intended Use
The Cervical Cage Large is intended for use within compatible cervical interbody spinal systems, according to the manufacturer’s approved indications and Instructions for Use.
Potential applications, where included within the approved indications, may include:
- Cervical interbody support.
- Cervical interbody fusion constructs.
- Reconstruction of an appropriate cervical intervertebral space.
- Anterior cervical interbody procedures when included in the approved indications.
- Cervical spinal stabilization as part of a compatible construct.
Selection of the appropriate cage configuration depends on factors such as:
- Cervical anatomy.
- Intervertebral space dimensions.
- Required implant fit.
- Endplate preparation.
- Bone quality.
- Adjacent fixation construct.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified spine surgeon according to the approved surgical technique and IFU.
Key Benefits
PEEK Material
The supplied catalog specifies:
Material: PEEK
Multiple Size Options
The product family includes listed configurations from:
3 to 9 mm
providing several options for implant selection.
1 MM Size Progression
The listed configurations progress in regular:
1 mm increments
allowing systematic selection between available variants.
Open Cage Geometry
The implant incorporates central openings as part of its interbody cage design.
Textured Contact Surface
The product image shows a textured contact surface incorporated into the cage geometry.
Seven Product Configurations
The family includes:
7 individual configurations
within the Cervical Cage Large range.
Product Traceability
Each configuration has a dedicated Cat. No. and GTIN No. to support:
- Implant identification.
- Product traceability.
- Surgical set preparation.
- Procurement.
- Inventory management.
- Stock control.
Technical Specifications
| Listed Length | Cat. No. | GTIN No. |
| 3 mm | AMS 511.014.003P | 6221361022713 |
| 4 mm | AMS 511.014.004P | 6221361022744 |
| 5 mm | AMS 511.014.005P | 6221361022775 |
| 6 mm | AMS 511.014.006P | 6221361022805 |
| 7 mm | AMS 511.014.007P | 6221361022836 |
| 8 mm | AMS 511.014.008P | 6221361022867 |
| 9 mm | AMS 511.014.009P | 6221361022898 |
Technical Overview
Product Name: Cervical Cage Large
Material: PEEK
Product Type: Cervical Interbody Cage
Product Category: Spinal Interbody Implant
General Cat. No.: AMS 511.014.000
Listed Configurations: 3 / 4 / 5 / 6 / 7 / 8 / 9 mm
Listed Range: 3–9 mm
Increment: 1 mm
Number of Configurations: 7
Design: Open PEEK Cervical Cage with Textured Contact Surface
Anatomical Application: Cervical Spine
Functional Role: Interbody support within a compatible cervical spinal construct
Identification: Individual Cat. No. and GTIN No. for each configuration
Product Features
- Large Cervical Cage Design.
- Manufactured from PEEK according to the catalog.
- Designed for compatible cervical interbody systems.
- Compact interbody cage geometry.
- Central open structure.
- Textured / serrated contact surface visible in the product design.
- Available in 7 configurations.
- Listed range from 3 to 9 mm.
- Regular 1 mm increments.
- Supports multiple implant selection options according to anatomy and surgical planning.
- Individual Cat. No. for each configuration.
- Individual GTIN No. for each variant.
- Supports implant identification, traceability, procurement, and inventory management.
Reviews
There are no reviews yet.