The Ligamentous Anchor is intended to be used as part of a compatible orthopedic fixation system according to the approved indications, surgical technique, and Instructions for Use. The exact anatomical application, compatible implants, fixation method, and instrumentation should be confirmed from the official technical documentation.
The product is shown as an anchor component with a threaded distal section, a proximal shaft, and a visible tip or interface. The supplied product table identifies both configurations as having a 2.7 mm diameter. The exact difference between the two configurations is not defined in the supplied image and should not be inferred solely from the Cat. No. suffixes.
According to the provided product information, the product is identified as:
Product Name: Ligamentous Anchor
The product is available in the following identified configuration category:
Diameter: 2.7 mm
Each configuration is assigned an individual Cat. No. and GTIN No., supporting accurate implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.
Product Explanation
The Ligamentous Anchor is an orthopedic fixation component used within a compatible ligament or soft-tissue fixation construct. Its threaded anchor design is intended to engage the applicable fixation site according to the approved surgical technique and product documentation.
A simplified fixation concept can be represented as:
Ligament / Soft-Tissue Structure → Ligamentous Anchor → Orthopedic Fixation Construct
Anchor selection and use are determined according to the applicable anatomy, tissue and bone conditions, fixation requirements, compatible instrumentation, and approved surgical plan.
Product Components and Design
- Ligamentous Anchor Body
The supplied image shows an anchor body with a threaded distal portion and a proximal shaft. The material, material grade, dimensions, and mechanical specifications are not specified in the product image and should be confirmed from the official technical documentation.
- Threaded Distal Portion
The product illustration visibly shows a threaded distal section intended to engage the applicable fixation site. The exact thread geometry, pitch, engagement characteristics, and approved fixation function are not defined in the supplied product table.
- Proximal Shaft and Interface
A proximal shaft and tip or interface are visible in the product illustration. The exact insertion interface, driver compatibility, delivery system, and surgical instrumentation should be confirmed from the official surgical technique and Instructions for Use.
- Diameter-Specific Configuration
Both configurations listed in the supplied table have a diameter of:
2.7 mm
- Configuration-Specific Identification
The two configurations are individually identified as follows:
- AMS 530.000.002T with GTIN No. 6221361042964.
- AMS 530.000.002P with GTIN No. 6221361013094.
The specific technical distinction represented by the Cat. No. suffixes is not defined in the supplied image.
Intended Use
The Ligamentous Anchor is designed for use within a compatible ligament or orthopedic soft-tissue fixation system according to the approved indications, surgical technique, and Instructions for Use.
The supplied image alone does not define the complete clinical indication, patient population, anatomical application, associated implants, suture requirements, or surgical procedure. These details should be confirmed from the official product documentation and applicable regulatory information.
Product selection and use depend on factors including:
- Anatomical location.
- Ligament or soft-tissue condition.
- Surgical indication.
- Required fixation method.
- Anchor diameter.
- Required insertion depth and preparation.
- Compatible implant and instrumentation selection.
- Bone and tissue quality.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and used by a qualified orthopedic surgeon in accordance with the approved surgical technique and Instructions for Use.
Key Features
Ligamentous Anchor Design
The product is identified as a Ligamentous Anchor and is shown as an anchor component with a threaded distal portion, proximal shaft, and visible tip or interface.
2.7 mm Diameter
Both listed configurations have a specified diameter of:
2.7 mm
Threaded Anchor Profile
The product illustration shows a threaded distal profile. The detailed mechanical, insertion, and fixation characteristics should be confirmed from the official product documentation.
Two Identified Configurations
The supplied product table contains two configurations with separate Cat. No. and GTIN No. assignments. The exact technical difference between the configurations is not stated in the image.
Product Traceability
Each configuration has an individual Cat. No. and GTIN No. to support implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.
Technical Specifications
| Diameter | Cat. No. | GTIN No. |
| 2.7 mm | AMS 530.000.002T | 6221361042964 |
| 2.7 mm | AMS 530.000.002P | 6221361013094 |
Technical Overview
Product Name: Ligamentous Anchor
Product Type: Orthopedic Soft-Tissue Fixation Implant
Product Category: Ligamentous Anchor
Diameter: 2.7 mm
Number of Identified Configurations: 2
Visible Design: Threaded distal anchor portion with proximal shaft and tip or interface
Material: Not specified in the supplied image
Length: Not specified in the supplied image
Suture Specifications: Not specified in the supplied image
Anatomical Application: Ligament or soft-tissue fixation as identified by the product name; confirm the approved indication from official documentation
Identification: Individual Cat. No. and GTIN No. for each configuration
Product Features
- Ligamentous Anchor orthopedic fixation implant design.
- 7 mm diameter configuration.
- Threaded distal anchor profile.
- Proximal shaft and tip or interface shown in the product illustration.
- Two identified product configurations.
- Individual Cat. No. for each configuration.
- Individual GTIN No. for each configuration.
- Designed for use with a compatible ligament or orthopedic soft-tissue fixation system.
- Supports implant identification, traceability, procurement, and inventory management.
- Material, length, detailed dimensions, clinical indication, and compatible instrumentation to be confirmed from official technical documentation.
Reviews
There are no reviews yet.