The TENS Nail is intended to be used as part of a compatible orthopedic internal fixation system according to the approved indications, surgical technique, and Instructions for Use. The exact anatomical applications, fracture indications, compatible instrumentation, and surgical approach should be confirmed from the official technical documentation.
The product is shown as a slender intramedullary fixation nail with multiple length options. Both material variants have a 3.5 mm diameter and are available in the listed lengths from 200 mm to 410 mm. Selection of nail length, diameter, material variant, and associated fixation components should be performed according to the applicable anatomy, fracture characteristics, bone dimensions, patient requirements, and approved surgical plan.
According to the provided product information, the product family is identified as:
Product Name: TENS Nail
The product family has the following specifications shown in the image:
Diameter: 3.5 mm
Material Variants: TIT and Stainless Steel (316L)
Available Lengths: 200–410 mm, according to the 21 lengths listed in the source image
Length Pattern: 200 mm, 220 mm, then 230–410 mm in 10 mm increments
Number of Configurations: 21 per material variant; 42 total identified entries
The material notation TIT is reproduced exactly as shown in the supplied image. Its expanded material designation and applicable material standard should be confirmed from the official technical documentation.
The Cat. No. values in the TIT table are shown with the AMS prefix. The Cat. No. values in the Stainless Steel (316L) table are reproduced exactly as displayed in the supplied image, where the AMS prefix is not visibly included. This formatting should be verified against the official product labels or source database.
Each length and material variant is assigned an individual Cat. No. and GTIN No., supporting accurate implant identification, product traceability, procurement, inventory management, and stock control.
Product Explanation
The TENS Nail is an orthopedic intramedullary fixation implant used within a compatible long-bone fixation construct. It is positioned within the applicable medullary canal and used with compatible fixation components according to the approved surgical technique and product documentation.
A simplified fixation concept can be represented as:
Long-Bone Fracture / Prepared Medullary Canal → TENS Nail → Compatible Fixation Components → Internal Fixation Construct
Nail diameter and length are selected according to the patient’s anatomy, medullary canal dimensions, fracture location and pattern, required fixation levels, bone quality, and the surgical plan. Material selection should be made according to the applicable product documentation and clinical requirements.
Product Components and Design
- Slender Intramedullary Nail Body
The supplied image shows slender nail components intended for placement within a compatible bone canal. Both variants are identified with a 3.5 mm diameter. The detailed cross-sectional geometry, curvature, wall thickness, and mechanical specifications are not defined in the supplied image.
- Multiple Length Options
The product family includes 21 listed lengths ranging from 200 mm to 410 mm. The sequence begins with a 200 mm option, followed by 220 mm, and then continues in 10 mm increments through 410 mm.
- Material Variants
The supplied image identifies two material variants:
- TIT, reproduced as shown in the image. The expanded designation should be confirmed from official documentation.
- Stainless Steel (316L).
The material variant must be matched with the applicable Cat. No., GTIN No., surgical set, and product documentation.
- Diameter Configuration
Both material variants are identified with a diameter of:
3.5 mm
- Product Identification
Each length and material variant has a dedicated Cat. No. and GTIN No. The Cat. No. formatting differs visibly between the two tables, and the displayed formatting should be verified against official product documentation before use.
Intended Use
The TENS Nail is designed for use within a compatible orthopedic internal fixation system according to the approved indications, surgical technique, and Instructions for Use.
The supplied image alone does not define the complete clinical indication, fracture classification, patient population, associated fixation components, surgical approach, contraindications, or material-selection criteria. These details should be confirmed from the official product documentation and applicable regulatory information.
Nail selection and use depend on factors including:
- Applicable anatomy.
- Medullary canal dimensions.
- Fracture location and pattern.
- Required nail diameter.
- Required nail length.
- Material compatibility and applicable product requirements.
- Bone quality.
- Compatible fixation components and instrumentation.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified orthopedic surgeon in accordance with the approved surgical technique and Instructions for Use.
Key Features
3.5 mm Nail Diameter
Both material variants are identified with a diameter of:
3.5 mm
Two Material Variants
The supplied image presents two variants:
- TIT, as written in the image.
- Stainless Steel (316L).
The expanded material designation for TIT should be confirmed from official technical documentation.
Broad Length Range
The listed configurations extend from:
200 mm to 410 mm
with 21 individual length options shown in the source image.
Detailed Length Selection
The image lists 200 mm, 220 mm, and all 10 mm increments from 230 mm through 410 mm. The regular 10 mm pattern applies after the 220 mm configuration.
42 Identified Product Entries
The image presents 21 listed lengths for each of two material variants, resulting in:
42 identified length-and-material entries
Product Traceability
Each length and material variant has an individual Cat. No. and GTIN No. to support implant identification, traceability, procurement, and inventory management.
Technical Specifications — TIT Variant
| Material | Diameter | Length | Cat. No. | GTIN No. |
| TIT | 3.5 mm | 200 mm | AMS 818.035.020T | 6221361000889 |
| TIT | 3.5 mm | 220 mm | AMS 818.035.022T | 6221361000902 |
| TIT | 3.5 mm | 230 mm | AMS 818.035.023T | 6221361000926 |
| TIT | 3.5 mm | 240 mm | AMS 818.035.024T | 6221361000940 |
| TIT | 3.5 mm | 250 mm | AMS 818.035.025T | 6221361000964 |
| TIT | 3.5 mm | 260 mm | AMS 818.035.026T | 6221361000988 |
| TIT | 3.5 mm | 270 mm | AMS 818.035.027T | 6221361001012 |
| TIT | 3.5 mm | 280 mm | AMS 818.035.028T | 6221361001022 |
| TIT | 3.5 mm | 290 mm | AMS 818.035.029T | 6221361001046 |
| TIT | 3.5 mm | 300 mm | AMS 818.035.030T | 6221361001060 |
| TIT | 3.5 mm | 310 mm | AMS 818.035.031T | 6221361001084 |
| TIT | 3.5 mm | 320 mm | AMS 818.035.032T | 6221361001107 |
| TIT | 3.5 mm | 330 mm | AMS 818.035.033T | 6221361001121 |
| TIT | 3.5 mm | 340 mm | AMS 818.035.034T | 6221361001145 |
| TIT | 3.5 mm | 350 mm | AMS 818.035.035T | 6221361001169 |
| TIT | 3.5 mm | 360 mm | AMS 818.035.036T | 6221361001183 |
| TIT | 3.5 mm | 370 mm | AMS 818.035.037T | 6221361001206 |
| TIT | 3.5 mm | 380 mm | AMS 818.035.038T | 6221361001220 |
| TIT | 3.5 mm | 390 mm | AMS 818.035.039T | 6221361001244 |
| TIT | 3.5 mm | 400 mm | AMS 818.035.040T | 6221361001268 |
| TIT | 3.5 mm | 410 mm | AMS 818.035.041T | 6221361001282 |
Technical Specifications — Stainless Steel (316L) Variant
| Material | Diameter | Length | Cat. No. | GTIN No. |
| Stainless Steel (316L) | 3.5 mm | 200 mm | 818.035.020S | 6221361000698 |
| Stainless Steel (316L) | 3.5 mm | 220 mm | 818.035.022S | 6221361000711 |
| Stainless Steel (316L) | 3.5 mm | 230 mm | 818.035.023S | 6221361000735 |
| Stainless Steel (316L) | 3.5 mm | 240 mm | 818.035.024S | 6221361000759 |
| Stainless Steel (316L) | 3.5 mm | 250 mm | 818.035.025S | 6221361000773 |
| Stainless Steel (316L) | 3.5 mm | 260 mm | 818.035.026S | 6221361000797 |
| Stainless Steel (316L) | 3.5 mm | 270 mm | 818.035.027S | 6221361000810 |
| Stainless Steel (316L) | 3.5 mm | 280 mm | 818.035.028S | 6221361000834 |
| Stainless Steel (316L) | 3.5 mm | 290 mm | 818.035.029S | 6221361000858 |
| Stainless Steel (316L) | 3.5 mm | 300 mm | 818.035.030S | 6221361000872 |
| Stainless Steel (316L) | 3.5 mm | 310 mm | 818.035.031S | 6221361000896 |
| Stainless Steel (316L) | 3.5 mm | 320 mm | 818.035.032S | 6221361000919 |
| Stainless Steel (316L) | 3.5 mm | 330 mm | 818.035.033S | 6221361000933 |
| Stainless Steel (316L) | 3.5 mm | 340 mm | 818.035.034S | 6221361000957 |
| Stainless Steel (316L) | 3.5 mm | 350 mm | 818.035.035S | 6221361000971 |
| Stainless Steel (316L) | 3.5 mm | 360 mm | 818.035.036S | 6221361000995 |
| Stainless Steel (316L) | 3.5 mm | 370 mm | 818.035.037S | 6221361001015 |
| Stainless Steel (316L) | 3.5 mm | 380 mm | 818.035.038S | 6221361001039 |
| Stainless Steel (316L) | 3.5 mm | 390 mm | 818.035.039S | 6221361001053 |
| Stainless Steel (316L) | 3.5 mm | 400 mm | 818.035.040S | 6221361001077 |
| Stainless Steel (316L) | 3.5 mm | 410 mm | 818.035.041S | 6221361001091 |
Variant Comparison
| Specification | TIT Variant | Stainless Steel Variant |
| Diameter | 3.5 mm | 3.5 mm |
| Material notation | TIT, as shown in the image | Stainless Steel (316L) |
| Listed lengths | 200, 220, and 230–410 mm | 200, 220, and 230–410 mm |
| Number of configurations | 21 | 21 |
| Cat. No. display | AMS prefix visible | AMS prefix not visibly included in the supplied image |
| GTIN assignment | Individual GTIN for each length | Individual GTIN for each length |
The table above summarizes only the information visible in the supplied image. The Cat. No. formatting for the Stainless Steel (316L) table should be verified against the official product documentation.
Technical Overview
Product Name: TENS Nail
Product Type: Intramedullary Orthopedic Fixation Implant
Product Category: TENS Nail
Diameter: 3.5 mm
Material Variants: TIT and Stainless Steel (316L)
Listed Lengths: 200 mm, 220 mm, and 230–410 mm
Length Pattern: 200 mm, 220 mm, followed by 10 mm increments from 230 mm to 410 mm
Number of Configurations: 21 per material variant; 42 total identified entries
Design: Slender Intramedullary Nail
Fixation Concept: Intramedullary Internal Fixation
Anatomical Application: Compatible orthopedic fixation procedures; confirm the specific application from official documentation
Identification: Individual Cat. No. and GTIN No. for each length-and-material configuration
Product Features
- TENS Nail design.
- 3.5 mm diameter for both displayed material variants.
- TIT material notation shown for one variant.
- Stainless Steel (316L) identified for the second variant.
- Slender intramedullary fixation concept.
- Available in 21 lengths per material variant.
- Listed length range from 200 mm to 410 mm.
- 200 mm and 220 mm configurations followed by 10 mm increments from 230 mm to 410 mm.
- 42 identified length-and-material entries in total.
- Individual Cat. No. for each length and material variant.
- Individual GTIN No. for each configuration.
- Supports implant identification, traceability, procurement, and inventory management.
Reviews
There are no reviews yet.