Product Explanation
The Locking Distal Radius Plate, Straight 2.4/2.7 mm is an orthopedic plate intended to form part of a compatible internal fixation construct.
A simplified fixation concept can be represented as:
Prepared Bone → Straight Locking Plate → Compatible Fixation Screws → Internal Fixation Construct
The plate is positioned according to the applicable anatomy, fracture configuration, fixation requirements, surgical plan, approved surgical technique, and Instructions for Use.
Unlike the previously supplied distal radius plates with a widened anatomical head, this product is identified as a:
Straight Plate
and the supplied product image does not list a separate head-hole configuration.
The plate family is available with:
5 Shaft Holes
or
6 Shaft Holes
providing two basic plate configurations.
Product Components and Design
- Straight Plate Body
The implant consists of an elongated metallic plate with a generally straight geometry.
The product is specifically identified as:
Locking Distal Radius Plate, Straight
according to the supplied product image.
The exact anatomical contour, longitudinal curvature, dimensions, and plate-to-bone relationship are not defined in the supplied image and should be confirmed from the official technical drawing.
- Shaft Fixation Section
The product image identifies two shaft-hole configurations:
5 Holes
and
6 Holes
These options provide different fixation layouts within the straight plate family.
The exact plate length corresponding to each shaft-hole configuration is not provided.
- No Separate Head-Hole Configuration
The supplied product data shows:
Head Holes: –
Therefore, no separate head-hole number is specified for this product.
This should not automatically be interpreted as a technical statement that the plate has “zero fixation holes” in a particular anatomical region; rather, the supplied catalog image simply does not define a separate head-hole configuration.
- Multiple Opening Geometries
The supplied product image visually shows multiple openings distributed along the length of the plate.
These include circular openings and elongated openings.
The exact purpose of the individual openings—such as locking fixation, conventional fixation, compression, positioning, or adjustment—is not specified in the supplied data and should be confirmed from the approved surgical technique.
- Straight Alignment
According to the supplied product data:
Alignment: Straight
This distinguishes the product from side-specific Left / Right distal radius plate designs.
No separate left or right configuration is identified in the supplied image.
- Material Options
According to the supplied product data, the plate is available in:
SS316L
and
Titanium
The specific Titanium alloy or grade is not stated in the supplied image and should be confirmed from the official material specification.
Intended Use
The Locking Distal Radius Plate, Straight 2.4/2.7 mm is designed for use as part of a compatible orthopedic fixation system according to the approved indications, surgical technique, and Instructions for Use.
The exact anatomical indication, fracture classifications, approved fixation sites, screw configuration, surgical approach, and patient selection criteria are not provided in the supplied image and should be confirmed from the manufacturer’s official documentation.
Plate selection may depend on factors including:
- Anatomical location.
- Bone anatomy.
- Fracture location and configuration.
- Required plate length.
- Required shaft-hole configuration.
- Bone dimensions.
- Bone quality.
- Fixation requirements.
- Compatible screw selection.
- Compatible instrumentation.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified orthopedic surgeon according to the approved surgical technique and Instructions for Use.
Key Benefits
Straight Plate Configuration
The product is specifically identified as:
Straight
providing a straight plate geometry within the compatible fixation system.
Two Shaft-Hole Options
The plate family is available with:
5 Shaft Holes
and
6 Shaft Holes
allowing selection between different plate configurations.
Two Material Options
According to the supplied product information, the plate is available in:
SS316L
and
Titanium
2.4/2.7 mm Fixation System
The product is identified as:
Locking Distal Radius Plate, Straight 2.4/2.7 mm
indicating its association with a compatible 2.4/2.7 mm orthopedic fixation system.
The exact compatible screw diameter assigned to each opening should be confirmed from the official technical documentation.
Non-Side-Specific Alignment
The product is identified as:
Straight
rather than Left or Right.
Based on the supplied data, no side-specific alignment is specified for this plate.
Multiple Basic Product Configurations
Based strictly on the visible product information, the family includes:
- 1 alignment: Straight
- 2 shaft-hole options: 5 / 6
- 2 material options: SS316L / Titanium
This represents up to 4 basic shaft × material configurations, assuming both listed materials are available in both shaft-hole versions.
The exact number of commercially available catalog configurations should be confirmed from the official Cat. No. table.
Technical Specifications
| Specification | Product Data |
| Product Name | Locking Distal Radius Plate, Straight 2.4/2.7 mm |
| Product Category | Trauma – Radius |
| Product Type | Locking Orthopedic Fixation Plate |
| Plate Configuration | Straight |
| Alignment | Straight |
| System Size | 2.4/2.7 mm |
| Head Holes | Not specified in supplied image |
| Shaft Hole Options | 5, 6 |
| Materials | SS316L, Titanium |
| Basic Shaft/Material Configurations | Up to 4, subject to catalog confirmation |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
| Plate Length | Not provided |
| Plate Width | Not provided |
| Plate Thickness | Not provided |
| Compatible Screw Details | Not provided |
| Titanium Grade | Not provided |
| Compatible Instrumentation | Not provided |
Technical Overview
Product Name: Locking Distal Radius Plate, Straight 2.4/2.7 mm
Product Category: Trauma – Radius
Product Type: Locking Orthopedic Fixation Plate
Plate Type: Straight
Alignment: Straight
System: 2.4/2.7 mm
Head Holes: Not specified
Shaft Hole Options: 5 and 6
Material Options: SS316L and Titanium
Plate Geometry: Elongated straight plate
Fixation Concept: Plate-and-screw internal fixation using a compatible orthopedic fixation system
Side-Specific Design: Not specified; product is listed as Straight
Cat. No.: Not supplied
GTIN No.: Not supplied
Specific Titanium Grade: Not supplied
Plate Dimensions: Not supplied
Specific Screw Compatibility: Not supplied
Product Features
- Locking orthopedic plate design.
- Identified as a Straight plate configuration.
- Associated with a 2.4/2.7 mm fixation system according to the product name.
- Straight alignment.
- No separate Left or Right configuration is specified.
- No separate head-hole number is specified in the supplied product data.
- Available with 5 shaft holes.
- Available with 6 shaft holes.
- Available in SS316L.
- Available in Titanium.
- Features an elongated plate geometry.
- Includes multiple fixation openings along the plate body.
- Includes circular openings visible in the supplied image.
- Includes elongated openings visible in the supplied image.
- Supports selection between two shaft-hole configurations.
- Supports selection between two listed material options.
- Exact hole-specific screw compatibility should be confirmed from official documentation.
- Exact plate length, width, and thickness should be confirmed from the manufacturer’s technical drawings.
- Individual Cat. No. and GTIN No. should be added when the official catalog table is available.
- Approved indications, contraindications, and surgical technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.