Product Explanation
The Locking Periarticular Proximal Humerus Plate, 3.5 mm is an orthopedic fixation plate intended to form part of a compatible internal fixation construct in the proximal humerus region.
A simplified fixation concept can be represented as:
Proximal Humerus → Periarticular Locking Plate → Compatible Fixation Screws → Internal Fixation Construct
The plate is selected and positioned according to the anatomical side, proximal humerus anatomy, fracture configuration, required fixation construct, bone dimensions, surgical plan, approved surgical technique, and Instructions for Use.
According to the supplied product information, the plate is available in:
Left / Right
configurations.
The product data lists:
3 Head Holes
and provides six shaft configurations:
3 / 5 / 7 / 9 / 11 / 13 Shaft Holes
allowing multiple plate variants within the same product family.
Product Components and Design
- Periarticular Plate Body
The implant consists of a metallic fixation plate with a broadened proximal section and an elongated shaft.
The product is specifically identified as:
Periarticular Proximal Humerus Plate
according to the supplied product designation.
The widened proximal portion is visually configured differently from the narrower shaft section.
The exact anatomical contour, plate curvature, proximal width, shaft dimensions, and relationship to the proximal humerus should be confirmed from the manufacturer’s technical drawings.
- Proximal Fixation Section
The proximal region of the plate is broadened and visually incorporates multiple fixation openings.
According to the supplied product table:
Head Holes: 3
This value should be reproduced as supplied unless the manufacturer’s technical table provides a corrected definition.
The exact classification, screw compatibility, locking characteristics, and trajectory of the individual proximal openings are not specified in the supplied image.
- Shaft Section
The elongated shaft is available with:
3 Shaft Holes
5 Shaft Holes
7 Shaft Holes
9 Shaft Holes
11 Shaft Holes
13 Shaft Holes
This provides six listed shaft configurations within the product family.
The exact physical length corresponding to each shaft-hole configuration is not provided.
- Multiple Fixation Opening Geometries
The supplied product image visually shows multiple fixation openings distributed across the proximal plate region and shaft.
These include:
- Multiple circular proximal openings.
- Circular openings of different apparent sizes.
- Shaft fixation openings.
- An elongated opening visible in the shaft region.
- Additional openings distributed along the longitudinal plate body.
The exact technical function of each opening—such as locking fixation, conventional fixation, compression, positioning, or another fixation function—is not defined in the supplied image and should be confirmed from the approved surgical technique.
- Left and Right Configurations
According to the supplied product data, the plate is available in:
Left / Right
alignment options.
This indicates side-specific variants within the product family.
The exact contour differences between the Left and Right versions should be confirmed from the manufacturer’s engineering drawings.
- Periarticular Configuration
The product is specifically designated:
Periarticular
within the product name.
This distinguishes the implant from other proximal humerus plate configurations.
The exact design characteristics associated with the manufacturer’s use of the term Periarticular should be confirmed from the official technical documentation.
- Material Options
According to the supplied product data, the plate is available in:
SS316L
and
Titanium
The exact Titanium alloy or grade is not specified in the supplied image and should be confirmed from the manufacturer’s material specification.
Intended Use
The Locking Periarticular Proximal Humerus Plate, 3.5 mm is designed for use as part of a compatible orthopedic fixation system involving the proximal humerus, according to the approved indications, surgical technique, and Instructions for Use.
Potential applications may involve internal fixation of the proximal humerus where this periarticular plate configuration is included within the manufacturer’s approved indications.
The exact fracture patterns, fracture classifications, anatomical indications, surgical approach, fixation strategy, contraindications, and patient-selection criteria should be confirmed from the official product documentation.
Plate selection may depend on factors including:
- Anatomical side.
- Proximal humerus anatomy.
- Fracture location and configuration.
- Required fixation construct.
- Required plate length.
- Required shaft-hole configuration.
- Bone dimensions.
- Bone quality.
- Compatible screw selection.
- Compatible instrumentation.
- Surgical approach.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified orthopedic surgeon in accordance with the approved surgical technique and Instructions for Use.
Key Benefits
Periarticular Proximal Humerus Configuration
The product is specifically identified as a:
Periarticular Proximal Humerus Plate
providing a dedicated fixation plate configuration for use within a compatible proximal humerus system.
The exact approved biomechanical and clinical role should be verified from the manufacturer’s documentation.
Left and Right Anatomical Options
The product is available in:
Left / Right
configurations, supporting side-specific implant selection.
Six Shaft-Hole Configurations
The plate family includes:
3 / 5 / 7 / 9 / 11 / 13 Shaft Holes
providing a broad range of shaft configurations.
This supports selection among different plate variants according to fixation requirements and surgical planning.
3.5 mm Fixation System
The product is identified as:
Locking Periarticular Proximal Humerus Plate, 3.5 mm
indicating its association with a compatible 3.5 mm orthopedic fixation system.
The exact compatible screw type and whether every plate opening accepts the same screw diameter should be confirmed from the official system documentation.
Two Material Options
According to the supplied product data, the plate is available in:
SS316L
and
Titanium
Multiple Plate-Length Configurations
The increasing shaft-hole options:
3 → 5 → 7 → 9 → 11 → 13
indicate multiple plate variants within the product family.
The corresponding physical plate lengths are not supplied and should be obtained from the official dimensional table.
Multiple Product Variants
Based strictly on the supplied product information, the family includes:
- 2 alignment options: Left / Right
- 1 listed head-hole configuration: 3
- 6 shaft-hole options: 3 / 5 / 7 / 9 / 11 / 13
- 2 material options: SS316L / Titanium
If all shaft configurations are available for both alignments and both materials, these parameters could represent up to 24 basic alignment × shaft × material combinations.
However, the supplied image does not provide the full commercial product matrix. The exact number of available configurations should therefore be confirmed from the official Cat. No. table.
Technical Specifications
| Specification | Product Data |
| Product Name | Locking Periarticular Proximal Humerus Plate, 3.5 mm |
| Product Category | Trauma |
| Product Type | Locking Orthopedic Fixation Plate |
| Plate Configuration | Periarticular |
| Anatomical Region | Proximal Humerus |
| System Size | 3.5 mm |
| Alignment | Left, Right |
| Head Holes | 3, according to supplied data |
| Shaft Hole Options | 3, 5, 7, 9, 11, 13 |
| Materials | SS316L, Titanium |
| Potential Basic Configurations | Up to 24, subject to catalog confirmation |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
| Plate Lengths | Not provided |
| Proximal Plate Width | Not provided |
| Plate Thickness | Not provided |
| Compatible Screw Details | Not provided |
| Screw Trajectories | Not provided |
| Locking Angle / Range | Not provided |
| Titanium Grade | Not provided |
| Compatible Instrumentation | Not provided |
Technical Overview
Product Name: Locking Periarticular Proximal Humerus Plate, 3.5 mm
Product Category: Trauma
Product Type: Locking Orthopedic Fixation Plate
Plate Type: Periarticular
Anatomical Region: Proximal Humerus
System: 3.5 mm
Alignment Options: Left and Right
Head Holes: 3, according to supplied product data
Shaft Hole Options: 3, 5, 7, 9, 11, and 13
Material Options: SS316L and Titanium
Plate Geometry: Broadened proximal fixation section with elongated shaft
Fixation Concept: Plate-and-screw internal fixation using a compatible orthopedic fixation system
Side-Specific Design: Yes — Left / Right, according to supplied data
Configuration: Periarticular
Cat. No.: Not supplied
GTIN No.: Not supplied
Plate Lengths: Not supplied
Specific Titanium Grade: Not supplied
Locking Angle / Range: Not supplied
Specific Screw Compatibility: Not supplied
Product Features
- Locking orthopedic fixation plate design.
- Specifically identified as a Periarticular Proximal Humerus Plate.
- Associated with a 3.5 mm fixation system.
- Available in Left and Right configurations according to the supplied data.
- Listed with 3 head holes.
- Available with 3 shaft holes.
- Available with 5 shaft holes.
- Available with 7 shaft holes.
- Available with 9 shaft holes.
- Available with 11 shaft holes.
- Available with 13 shaft holes.
- Available in SS316L.
- Available in Titanium.
- Features a broadened proximal fixation section.
- Features an elongated longitudinal shaft.
- Includes multiple visible proximal fixation openings.
- Includes multiple shaft fixation openings.
- Includes an elongated opening visible in the shaft region.
- Supports multiple plate-length / shaft-hole configurations.
- Supports side-specific implant selection according to the supplied product data.
- Exact proximal hole classification should be confirmed from official documentation.
- Exact compatible screw types and diameters should be confirmed from the manufacturer’s technical documentation.
- Exact screw trajectories and locking characteristics should be confirmed from the technical drawings and surgical technique.
- Exact physical plate lengths for the 3 / 5 / 7 / 9 / 11 / 13-hole variants should be confirmed from the dimensional specifications.
- Individual Cat. No. and GTIN No. should be added when the official product table is available.
- Approved indications, contraindications, and surgical technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.