Product Explanation
The Locking Distal Humerus Medial Plate 2.7/3.5 mm is an orthopedic fixation plate intended to form part of a compatible internal fixation construct involving the medial region of the distal humerus.
A simplified fixation concept can be represented as:
Distal Humerus → Medial Locking Plate → Compatible Fixation Screws → Internal Fixation Construct
The product is specifically identified as a:
Distal Humerus Medial Plate
according to the supplied product designation.
The plate is selected and positioned according to the anatomical side, distal humerus anatomy, fracture configuration, required fixation construct, plate length, surgical plan, approved surgical technique, and Instructions for Use.
According to the supplied product information, the plate is available in:
Left / Right
configurations.
The shaft is offered with:
3 / 5 / 7 / 9 / 11 Shaft Holes
providing multiple plate variants within the same product family.
Product Components and Design
- Medial Distal Humerus Plate Body
The implant consists of an elongated metallic fixation plate with a contoured distal section.
The product is specifically identified as a:
Medial Plate
for the distal humerus.
The exact anatomical contour, distal curvature, dimensions, width, thickness, and plate-to-bone relationship should be confirmed from the manufacturer’s technical drawings.
- Distal Fixation Section
The distal end of the plate visibly incorporates multiple fixation openings.
However, the supplied product data states:
Head Holes: –
Therefore, no official numerical head-hole count is provided.
The exact number, classification, screw compatibility, locking mechanism, and trajectory of these distal openings should be confirmed from the manufacturer’s technical documentation rather than inferred from the image alone.
- Shaft Section
The elongated shaft is available with:
3 Shaft Holes
5 Shaft Holes
7 Shaft Holes
9 Shaft Holes
11 Shaft Holes
This provides five listed shaft configurations.
The exact physical plate length corresponding to each shaft-hole option is not provided in the supplied product image.
- Multiple Fixation Opening Geometries
The supplied image visually shows multiple fixation openings distributed along the plate body.
These include:
- Circular openings.
- Elongated / contoured openings.
- Distal fixation openings.
- Openings positioned along the longitudinal shaft.
The exact technical role of each opening—such as locking fixation, conventional fixation, compression, positioning, or adjustment—is not defined in the supplied product information and should be confirmed from the approved surgical technique.
- Medial Plate Configuration
The product is specifically designated:
Medial
within the product name.
This distinguishes it from other distal humerus plate configurations such as lateral, lateral-support, or extra-articular designs.
The exact anatomical positioning and geometry of the Medial configuration should be confirmed from the manufacturer’s technical drawings and surgical technique.
- Left and Right Configurations
According to the supplied product information, the plate is available in:
Left / Right
alignment options.
This supports side-specific implant selection.
The exact geometric differences between the Left and Right plate versions should be confirmed from the manufacturer’s engineering drawings.
- Material Options
According to the supplied product data, the plate is available in:
SS316L
and
Titanium
The specific Titanium alloy or grade is not stated in the supplied image and should be confirmed from the manufacturer’s official material specification.
Intended Use
The Locking Distal Humerus Medial Plate 2.7/3.5 mm is designed for use as part of a compatible orthopedic fixation system involving the distal humerus, according to the approved indications, surgical technique, and Instructions for Use.
The product designation identifies it as a Medial Distal Humerus Plate.
Potential applications may involve internal fixation of the distal humerus where this medial plate configuration is included within the manufacturer’s approved indications.
The exact fracture patterns, classifications, anatomical indications, fixation strategy, surgical approach, contraindications, and patient-selection criteria should be confirmed from the official product documentation.
Plate selection may depend on factors including:
- Anatomical side.
- Distal humerus anatomy.
- Medial anatomical location.
- Fracture location and configuration.
- Required fixation construct.
- Required plate length.
- Required shaft-hole configuration.
- Bone dimensions.
- Bone quality.
- Compatible screw selection.
- Screw trajectory requirements.
- Compatible instrumentation.
- Surgical approach.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified orthopedic surgeon in accordance with the approved surgical technique and Instructions for Use.
Key Benefits
Medial Distal Humerus Configuration
The product is specifically identified as a:
Locking Distal Humerus Medial Plate
providing a dedicated medial plate configuration within a compatible distal humerus fixation system.
The exact biomechanical role and approved clinical application should be confirmed from the manufacturer’s technical documentation.
Left and Right Anatomical Options
The plate is available in:
Left / Right
configurations, supporting side-specific implant selection.
Five Shaft-Hole Configurations
The plate family includes:
3 / 5 / 7 / 9 / 11 Shaft Holes
providing five different plate configurations.
This supports selection among different plate variants according to fixation requirements and surgical planning.
2.7/3.5 mm Fixation System
The product is identified as:
Locking Distal Humerus Medial Plate 2.7/3.5 mm
indicating its association with a compatible 2.7/3.5 mm orthopedic fixation system.
The exact allocation of 2.7 mm and 3.5 mm screws to individual plate openings should be confirmed from the manufacturer’s system documentation.
Two Material Options
According to the supplied product data, the plate is available in:
SS316L
and
Titanium
Multiple Plate-Length Configurations
The available shaft-hole options:
3 → 5 → 7 → 9 → 11
indicate multiple plate variants within the product family.
The corresponding physical plate lengths are not supplied and should be confirmed from the manufacturer’s dimensional table.
Multiple Product Variants
Based strictly on the supplied product information, the family includes:
- 2 alignment options: Left / Right
- No numerical head-hole configuration specified
- 5 shaft-hole options: 3 / 5 / 7 / 9 / 11
- 2 material options: SS316L / Titanium
If every shaft-hole option is available in both alignments and both materials, this could represent up to 20 basic alignment × shaft × material combinations.
However, the supplied image does not provide the complete commercial configuration matrix. The exact number of available variants should therefore be confirmed from the official Cat. No. table.
Technical Specifications
| Specification | Product Data |
| Product Name | Locking Distal Humerus Medial Plate 2.7/3.5 mm |
| Product Category | Trauma |
| Product Type | Locking Orthopedic Fixation Plate |
| Plate Configuration | Medial |
| Anatomical Region | Distal Humerus |
| System Size | 2.7/3.5 mm |
| Alignment | Left, Right |
| Head Holes | Not specified |
| Shaft Hole Options | 3, 5, 7, 9, 11 |
| Materials | SS316L, Titanium |
| Potential Basic Configurations | Up to 20, subject to catalog confirmation |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
| Plate Lengths | Not provided |
| Plate Width | Not provided |
| Plate Thickness | Not provided |
| Medial Contour / Bend | Not provided |
| Compatible Screw Details | Not provided |
| Screw Trajectories | Not provided |
| Titanium Grade | Not provided |
| Compatible Instrumentation | Not provided |
Technical Overview
Product Name: Locking Distal Humerus Medial Plate 2.7/3.5 mm
Product Category: Trauma
Product Type: Locking Orthopedic Fixation Plate
Plate Type: Medial Distal Humerus Plate
Anatomical Region: Distal Humerus
System: 2.7/3.5 mm
Alignment Options: Left and Right
Head Holes: Not specified
Shaft Hole Options: 3, 5, 7, 9, and 11
Material Options: SS316L and Titanium
Plate Geometry: Elongated shaft with contoured distal / medial fixation region
Fixation Concept: Plate-and-screw internal fixation using a compatible orthopedic fixation system
Side-Specific Design: Yes — Left / Right
Configuration: Medial
Cat. No.: Not supplied
GTIN No.: Not supplied
Plate Lengths: Not supplied
Plate Thickness: Not supplied
Specific Titanium Grade: Not supplied
Specific Screw Compatibility: Not supplied
Product Features
- Locking orthopedic fixation plate design.
- Specifically identified as a Distal Humerus Medial Plate.
- Associated with a 2.7/3.5 mm fixation system.
- Available in Left and Right configurations.
- No numerical head-hole specification is provided.
- Available with 3 shaft holes.
- Available with 5 shaft holes.
- Available with 7 shaft holes.
- Available with 9 shaft holes.
- Available with 11 shaft holes.
- Available in SS316L.
- Available in Titanium.
- Features an elongated longitudinal shaft.
- Features a contoured distal / medial fixation section.
- Includes multiple visible fixation openings.
- Includes circular openings visible in the supplied image.
- Includes elongated / contoured shaft openings visible in the supplied image.
- Supports side-specific implant selection.
- Supports five shaft-hole configurations.
- Supports multiple possible plate-length variants.
- Exact distal fixation-hole count and classification should be confirmed from official documentation.
- Exact compatible 2.7 mm / 3.5 mm screw assignment should be confirmed from the manufacturer’s technical documentation.
- Exact screw trajectories and locking characteristics should be confirmed from the approved technical drawings.
- Exact medial contour, plate lengths, width, and thickness should be confirmed from the manufacturer’s dimensional specifications.
- Individual Cat. No. and GTIN No. should be added when the official product table is available.
- Approved indications, contraindications, and surgical technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.