Product Explanation
The Locking T Small Plate, 3.5 mm is an orthopedic fixation plate intended to form part of a compatible internal fixation construct.
A simplified fixation concept can be represented as:
Prepared Bone → T-Shaped Locking Plate → Compatible Fixation Screws → Internal Fixation Construct
The plate features a characteristic T-shaped geometry, consisting of a widened transverse head section connected to an elongated shaft.
According to the supplied product information, the plate is identified as:
Simple
and is available with:
3 / 4 / 5 / 6 / 8 Shaft Holes
providing multiple plate configurations within the product family.
The specific anatomical region and approved clinical indications are not stated in the supplied image and should therefore be confirmed from the manufacturer’s official documentation.
Product Components and Design
- T-Shaped Plate Body
The implant consists of a metallic fixation plate with a broadened transverse section at one end and an elongated longitudinal shaft.
This creates the characteristic:
T-shaped plate geometry
shown in the supplied product image.
The exact plate contour, transverse-head width, shaft length, plate thickness, and anatomical relationship are not provided in the supplied data.
- Transverse Head Section
The upper portion of the plate forms a widened T-shaped head and visibly incorporates several fixation openings.
However, the supplied product table states:
Head Holes: –
Therefore, no official numerical head-hole count is provided.
The exact number, classification, locking characteristics, compatible screw type, and trajectory of the visible head openings should be confirmed from the manufacturer’s technical documentation rather than inferred solely from the image.
- Shaft Section
According to the supplied product data, the plate is available with:
3 Shaft Holes
4 Shaft Holes
5 Shaft Holes
6 Shaft Holes
8 Shaft Holes
This provides five different shaft configurations within the same product family.
The exact physical plate length corresponding to each shaft-hole option is not provided.
- Multiple Fixation Opening Geometries
The supplied image visually shows different fixation opening geometries distributed across the plate.
These include:
- Circular openings within the T-shaped head.
- Circular shaft openings.
- Elongated / contoured openings within the shaft.
- Additional fixation openings along the longitudinal plate body.
The exact technical function of each opening—such as locking fixation, conventional fixation, compression, positioning, or adjustment—is not specified in the supplied product information and should be confirmed from the approved surgical technique.
- Simple Configuration
According to the supplied product data:
Alignment: Simple
This designation is reproduced exactly from the supplied image.
The image does not define what the manufacturer means technically by Simple, nor does it specify Left, Right, Straight, or side-specific versions.
Therefore, the exact meaning of this configuration should be confirmed from the manufacturer’s catalog.
- Material Options
According to the supplied product information, the plate is available in:
SS316L
and
Titanium
The exact Titanium alloy or grade is not specified in the supplied image and should be confirmed from the manufacturer’s material specification.
Intended Use
The Locking T Small Plate, 3.5 mm is designed for use as part of a compatible orthopedic fixation system according to the approved indications, surgical technique, and Instructions for Use.
The supplied image does not specify the exact anatomical region or approved clinical application.
Potential use should therefore be described only in general terms as orthopedic plate fixation within procedures for which this implant has been approved by the manufacturer.
The exact anatomical indication, fracture type, surgical approach, fixation strategy, contraindications, and patient-selection criteria should be confirmed from the official product documentation.
Plate selection may depend on factors including:
- Anatomical location.
- Bone dimensions.
- Fracture location and configuration.
- Required fixation construct.
- Required plate geometry.
- Required shaft-hole configuration.
- Required plate length.
- Bone quality.
- Compatible screw selection.
- Compatible instrumentation.
- Surgical approach.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified orthopedic surgeon in accordance with the approved surgical technique and Instructions for Use.
Key Benefits
T-Shaped Plate Configuration
The product is specifically identified as a:
Locking T Small Plate
providing a distinct T-shaped geometry within a compatible orthopedic fixation system.
The exact anatomical purpose of the T-shaped configuration should be confirmed from the manufacturer’s documentation.
Compact Small Plate Design
The product designation includes:
Small Plate
indicating a compact plate configuration within the product family.
The exact physical dimensions defining the Small version are not supplied and should be confirmed from the technical drawings.
Five Shaft-Hole Options
The plate is available with:
3 / 4 / 5 / 6 / 8 Shaft Holes
providing five shaft configurations.
This supports selection among different plate variants according to the required fixation construct.
3.5 mm Fixation System
The product is identified as:
Locking T Small Plate, 3.5 mm
indicating its association with a compatible 3.5 mm orthopedic fixation system.
The exact compatible screw type, locking screw specification, and hole-specific screw assignment should be confirmed from the manufacturer’s official technical documentation.
Two Material Options
According to the supplied product information, the plate is available in:
SS316L
and
Titanium
Multiple Plate Configurations
Based strictly on the supplied product information, the family includes:
- 1 listed alignment/configuration: Simple
- No numerical head-hole configuration specified
- 5 shaft-hole options: 3 / 4 / 5 / 6 / 8
- 2 material options: SS316L / Titanium
If each shaft-hole configuration is available in both materials, this could represent up to 10 basic shaft × material combinations.
The exact commercial configuration matrix should be confirmed from the official Cat. No. table.
Technical Specifications
| Specification | Product Data |
| Product Name | Locking T Small Plate, 3.5 mm |
| Product Category | Orthopedic Fixation Plate |
| Product Type | Locking T-Shaped Plate |
| Plate Configuration | T Small Plate |
| Anatomical Region | Not specified |
| System Size | 3.5 mm |
| Alignment / Configuration | Simple |
| Head Holes | Not specified |
| Shaft Hole Options | 3, 4, 5, 6, 8 |
| Materials | SS316L, Titanium |
| Potential Basic Configurations | Up to 10, subject to catalog confirmation |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
| Plate Lengths | Not provided |
| Head Width | Not provided |
| Plate Width | Not provided |
| Plate Thickness | Not provided |
| Compatible Screw Details | Not provided |
| Screw Trajectories | Not provided |
| Titanium Grade | Not provided |
| Compatible Instrumentation | Not provided |
Technical Overview
Product Name: Locking T Small Plate, 3.5 mm
Product Category: Orthopedic Fixation
Product Type: Locking Orthopedic Fixation Plate
Plate Type: T Small Plate
System: 3.5 mm
Anatomical Region: Not specified
Alignment / Configuration: Simple
Head Holes: Not specified
Shaft Hole Options: 3, 4, 5, 6, and 8
Material Options: SS316L and Titanium
Plate Geometry: T-shaped transverse head with elongated shaft
Fixation Concept: Plate-and-screw internal fixation using a compatible orthopedic fixation system
Side-Specific Design: Not specified
Cat. No.: Not supplied
GTIN No.: Not supplied
Plate Lengths: Not supplied
Plate Thickness: Not supplied
Specific Titanium Grade: Not supplied
Specific Screw Compatibility: Not supplied
Product Features
- Locking orthopedic fixation plate design.
- Specifically identified as a T Small Plate.
- Features a T-shaped plate geometry.
- Associated with a 3.5 mm fixation system.
- Alignment / configuration identified as Simple.
- No numerical head-hole count is specified in the supplied product data.
- Available with 3 shaft holes.
- Available with 4 shaft holes.
- Available with 5 shaft holes.
- Available with 6 shaft holes.
- Available with 8 shaft holes.
- Available in SS316L.
- Available in Titanium.
- Features a widened transverse head section.
- Features an elongated shaft.
- Includes multiple visible fixation openings.
- Includes circular openings visible in the supplied product image.
- Includes elongated / contoured shaft openings visible in the supplied image.
- Supports five shaft-hole configurations.
- Supports multiple potential plate-length variants.
- Exact anatomical indication should be confirmed from official documentation.
- Exact meaning of “Simple” alignment should be confirmed from the manufacturer’s catalog.
- Exact head-hole count and classification should be confirmed from technical documentation.
- Exact compatible screw types and diameters should be confirmed from the manufacturer’s system documentation.
- Exact screw trajectories and locking characteristics should be confirmed from the approved technical drawings.
- Exact plate lengths, head width, plate width, and thickness should be confirmed from the manufacturer’s dimensional specifications.
- Individual Cat. No. and GTIN No. should be added when the official product table is available.
- Approved indications, contraindications, and surgical technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.