Product Explanation
The Locking Distal Femoral Plate, 5.0 mm is an orthopedic fixation plate intended to form part of a compatible internal fixation construct involving the distal femur.
A simplified fixation concept can be represented as:
Distal Femur → Locking Distal Femoral Plate → Compatible Fixation Screws → Internal Fixation Construct
The plate is selected and positioned according to the anatomical side, distal femur anatomy, fracture configuration, required fixation construct, plate length, surgical plan, approved surgical technique, and Instructions for Use.
According to the supplied product information, the plate is available in:
Left / Right
configurations.
The shaft is available with:
5 / 7 / 9 / 11 / 13 Shaft Holes
providing multiple plate configurations within the same product family.
No numerical Head Holes specification is provided in the supplied product table.
Product Components and Design
- Distal Femoral Plate Body
The implant consists of an elongated metallic fixation plate with a broadened distal fixation region and a longitudinal shaft.
The product is specifically identified as a:
Distal Femoral Plate
according to the supplied product designation.
The exact anatomical contour, distal width, plate curvature, dimensions, thickness, and plate-to-bone relationship should be confirmed from the manufacturer’s technical drawings.
- Distal Fixation Section
The distal end of the plate is visibly broadened and incorporates multiple fixation openings.
However, the supplied product data states:
Head Holes: –
Therefore, no official numerical head-hole count is provided.
The exact number, classification, compatible screw type, locking interface, and trajectory of the distal openings should be confirmed from the manufacturer’s technical documentation rather than inferred solely from the image.
- Shaft Section
According to the supplied product information, the plate is available with:
5 Shaft Holes
7 Shaft Holes
9 Shaft Holes
11 Shaft Holes
13 Shaft Holes
This provides five listed shaft-hole configurations within the product family.
The exact physical plate length corresponding to each shaft-hole configuration is not supplied.
- Multiple Fixation Opening Geometries
The supplied product image visually shows multiple fixation openings distributed across the distal plate region and shaft.
These include:
- Multiple distal fixation openings.
- Circular shaft openings.
- Longitudinal fixation positions.
- Additional openings within the widened distal section.
The exact technical function of each opening—such as locking fixation, conventional fixation, compression, positioning, or another function—is not defined in the supplied product information and should be confirmed from the approved surgical technique.
- Anatomically Contoured Distal Geometry
The plate features a widened and contoured distal section rather than a completely straight profile.
This geometry is consistent with the supplied designation as a Distal Femoral Plate.
The exact distal contour, bend angles, offset, width, and anatomical orientation are not provided in the supplied image.
- Left and Right Configurations
According to the supplied product data, the plate is available in:
Left / Right
versions.
This supports side-specific implant selection according to the femur being treated.
The exact geometric differences between the Left and Right versions should be confirmed from the manufacturer’s engineering drawings.
- Material Options
According to the supplied product information, the plate is available in:
SS316L
and
Titanium
The exact Titanium alloy or grade is not specified in the supplied image and should be confirmed from the manufacturer’s official material specification.
Intended Use
The Locking Distal Femoral Plate, 5.0 mm is designed for use as part of a compatible orthopedic fixation system involving the distal femur, according to the approved indications, surgical technique, and Instructions for Use.
Potential applications may involve internal fixation of the distal femur where this plate configuration is included within the manufacturer’s approved indications.
The exact fracture patterns, fracture classifications, anatomical indications, fixation strategy, surgical approach, contraindications, and patient-selection criteria should be confirmed from the official product documentation.
Plate selection may depend on factors including:
- Anatomical side.
- Distal femur anatomy.
- Fracture location and configuration.
- Required distal fixation pattern.
- Required fixation construct.
- Required plate length.
- Required shaft-hole configuration.
- Bone dimensions.
- Bone quality.
- Compatible screw selection.
- Distal screw trajectory requirements.
- Compatible instrumentation.
- Surgical approach.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified orthopedic surgeon in accordance with the approved surgical technique and Instructions for Use.
Key Benefits
Distal Femur-Specific Plate Configuration
The product is specifically identified as a:
Locking Distal Femoral Plate
providing a dedicated plate configuration within a compatible distal femur fixation system.
The exact anatomical and biomechanical role of the plate should be confirmed from the manufacturer’s approved documentation.
Left and Right Anatomical Options
The plate is available in:
Left / Right
configurations, supporting side-specific implant selection.
Five Shaft-Hole Configurations
The product family includes:
5 / 7 / 9 / 11 / 13 Shaft Holes
providing five different plate configurations.
This supports selection among different plate variants according to the required fixation construct and surgical planning.
5.0 mm Fixation System
The product is identified as:
Locking Distal Femoral Plate, 5.0 mm
indicating its association with a compatible 5.0 mm orthopedic fixation system.
The exact compatible screw type and whether every visible opening accepts a 5.0 mm screw should be confirmed from the manufacturer’s technical documentation.
Two Material Options
According to the supplied product information, the plate is available in:
SS316L
and
Titanium
Multiple Plate-Length Configurations
The available shaft-hole options:
5 → 7 → 9 → 11 → 13
indicate multiple plate variants within the same product family.
The exact corresponding physical plate lengths are not provided and should be confirmed from the manufacturer’s dimensional specifications.
Multiple Product Variants
Based strictly on the supplied product information, the family includes:
- 2 alignment options: Left / Right
- No numerical head-hole configuration specified
- 5 shaft-hole options: 5 / 7 / 9 / 11 / 13
- 2 material options: SS316L / Titanium
If every shaft-hole configuration is available in both alignments and both materials, this could represent up to 20 basic alignment × shaft × material combinations.
However, the supplied image does not provide the complete commercial configuration matrix. The exact number of available variants should therefore be confirmed from the official Cat. No. table.
Technical Specifications
| Specification | Product Data |
| Product Name | Locking Distal Femoral Plate, 5.0 mm |
| Product Category | Trauma – Femur |
| Product Type | Locking Orthopedic Fixation Plate |
| Plate Configuration | Distal Femoral Plate |
| Anatomical Region | Distal Femur |
| System Size | 5.0 mm |
| Alignment | Left, Right |
| Head Holes | Not specified |
| Shaft Hole Options | 5, 7, 9, 11, 13 |
| Number of Shaft-Hole Options | 5 |
| Materials | SS316L, Titanium |
| Potential Basic Configurations | Up to 20, subject to catalog confirmation |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
| Plate Lengths | Not provided |
| Distal Plate Width | Not provided |
| Plate Thickness | Not provided |
| Distal Contour / Bend Geometry | Not provided |
| Compatible Screw Details | Not provided |
| Screw Trajectories | Not provided |
| Titanium Grade | Not provided |
| Compatible Instrumentation | Not provided |
Technical Overview
Product Name: Locking Distal Femoral Plate, 5.0 mm
Product Category: Trauma – Femur
Product Type: Locking Orthopedic Fixation Plate
Plate Type: Distal Femoral Plate
Anatomical Region: Distal Femur
System: 5.0 mm
Alignment Options: Left and Right
Head Holes: Not specified
Shaft Hole Options: 5, 7, 9, 11, and 13
Material Options: SS316L and Titanium
Plate Geometry: Broadened distal fixation region with elongated shaft
Fixation Concept: Plate-and-screw internal fixation using a compatible orthopedic fixation system
Side-Specific Design: Yes — Left / Right
Cat. No.: Not supplied
GTIN No.: Not supplied
Plate Lengths: Not supplied
Plate Thickness: Not supplied
Specific Titanium Grade: Not supplied
Specific Screw Compatibility: Not supplied
Product Features
- Locking orthopedic fixation plate design.
- Specifically identified as a Distal Femoral Plate.
- Associated with a 5.0 mm fixation system.
- Available in Left and Right configurations.
- No numerical head-hole count is specified in the supplied product data.
- Available with 5 shaft holes.
- Available with 7 shaft holes.
- Available with 9 shaft holes.
- Available with 11 shaft holes.
- Available with 13 shaft holes.
- Provides five shaft-hole configurations.
- Available in SS316L.
- Available in Titanium.
- Features a broadened distal fixation section.
- Features an elongated longitudinal shaft.
- Includes multiple visible distal fixation openings.
- Includes multiple shaft fixation openings.
- Supports side-specific implant selection.
- Supports multiple potential plate-length configurations.
- Exact distal fixation-hole count and classification should be confirmed from official technical documentation.
- Exact compatible screw types and diameters should be confirmed from the manufacturer’s system documentation.
- Exact distal screw trajectories and locking characteristics should be confirmed from approved technical drawings.
- Exact plate lengths, distal contour, distal width, and thickness should be confirmed from the manufacturer’s dimensional specifications.
- Individual Cat. No. and GTIN No. should be added when the official product table is available.
- Approved indications, contraindications, and surgical technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.