Product Explanation
The Locking L-Oblique Distal Radius Plate, 2.4/2.7 mm is an orthopedic fixation plate intended to form part of a compatible internal fixation construct involving the distal radius.
A simplified fixation concept can be represented as:
Distal Radius → L-Oblique Locking Plate → Compatible Fixation Screws → Internal Fixation Construct
The product is specifically identified as an:
L-Oblique Distal Radius Plate
indicating a plate geometry with an obliquely oriented broadened fixation region connected to an elongated shaft.
According to the supplied product information, the plate family includes:
3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 Shaft Holes
providing a broad range of plate configurations.
No Left / Right alignment is specified in the supplied data.
Product Components and Design
- L-Oblique Plate Body
The implant consists of a metallic fixation plate with a broadened distal fixation region and an elongated longitudinal shaft.
The distal section is positioned obliquely relative to the shaft, creating the characteristic:
L-Oblique geometry
shown in the supplied image.
The exact oblique angle, plate length, distal width, shaft width, thickness, contour, and anatomical relationship should be confirmed from the manufacturer’s technical drawings.
- Distal Fixation Section
The broadened distal portion visibly incorporates multiple fixation openings.
However, the supplied product data states:
Head Holes: –
Therefore:
Head Holes: Not specified
should be used in the technical sheet.
The exact number, classification, compatible screw type, locking characteristics, and screw trajectories of the distal openings should be confirmed from the manufacturer’s official documentation rather than inferred solely by visually counting the openings.
- Shaft Section
According to the supplied product information, the plate is available with:
3 Shaft Holes
4 Shaft Holes
5 Shaft Holes
6 Shaft Holes
7 Shaft Holes
8 Shaft Holes
9 Shaft Holes
10 Shaft Holes
11 Shaft Holes
12 Shaft Holes
This provides 10 listed shaft-hole configurations within the product family.
The exact physical plate length corresponding to each configuration is not supplied.
- Multiple Fixation Opening Geometries
The supplied product image visually shows multiple fixation-opening geometries, including:
- Several circular openings within the widened distal section.
- Circular shaft openings.
- An elongated / oblong shaft opening.
- Multiple longitudinal fixation positions.
The exact technical function of each opening—such as locking fixation, conventional fixation, compression, positioning, or another role—is not specified in the supplied product data and should be confirmed from the approved surgical technique.
- L-Oblique Geometry
The product is specifically designated:
L-Oblique
within the product title.
This distinguishes the plate from straight, T-shaped, standard, or other distal radius plate geometries.
The exact:
- Oblique angle.
- Distal head orientation.
- Plate contour.
- Offset.
- Anatomical positioning.
- Screw trajectories.
are not defined in the supplied image.
- Alignment
According to the supplied product data:
Alignment: –
Therefore, no specific:
Left / Right
configuration is confirmed in this source.
The product should not be described as side-specific unless this is confirmed by the manufacturer’s official catalog.
- Material Options
According to the supplied product information, the plate is available in:
SS316L
and
Titanium
The exact Titanium alloy or grade is not specified in the supplied image and should be confirmed from the manufacturer’s material documentation.
Intended Use
The Locking L-Oblique Distal Radius Plate, 2.4/2.7 mm is designed for use as part of a compatible orthopedic fixation system involving the distal radius, according to the approved indications, surgical technique, and Instructions for Use.
Potential applications may involve internal fixation of the distal radius where this L-Oblique plate configuration is included within the manufacturer’s approved indications.
The exact fracture patterns, fracture classifications, anatomical indications, fixation strategy, surgical approach, contraindications, and patient-selection criteria should be confirmed from the official product documentation.
Plate selection may depend on factors including:
- Distal radius anatomy.
- Fracture location and configuration.
- Required L-Oblique plate geometry.
- Required distal fixation pattern.
- Required fixation construct.
- Required shaft-hole configuration.
- Required plate length.
- Bone dimensions.
- Bone quality.
- Compatible screw selection.
- Distal screw trajectory requirements.
- Compatible instrumentation.
- Surgical approach.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified orthopedic surgeon according to the approved surgical technique and Instructions for Use.
Key Benefits
L-Oblique Distal Radius Configuration
The product is specifically identified as a:
Locking L-Oblique Distal Radius Plate
providing a distinct oblique plate geometry within a compatible distal radius fixation system.
The exact anatomical and biomechanical role of this configuration should be confirmed from the manufacturer’s approved documentation.
Broad Range of Shaft-Hole Options
The product family includes:
3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 Shaft Holes
providing 10 different shaft-hole configurations.
This supports selection among multiple plate variants according to fixation requirements and surgical planning.
2.4/2.7 mm Fixation System
The product is identified as:
Locking L-Oblique Distal Radius Plate, 2.4/2.7 mm
indicating its association with a compatible 2.4/2.7 mm orthopedic fixation system.
The exact allocation of 2.4 mm and 2.7 mm screws to individual openings should be confirmed from the manufacturer’s system documentation.
Two Material Options
According to the supplied product data, the plate is available in:
SS316L
and
Titanium
Multiple Plate-Length Configurations
The shaft-hole options:
3 → 4 → 5 → 6 → 7 → 8 → 9 → 10 → 11 → 12
indicate multiple potential plate-length variants.
The corresponding physical plate lengths are not supplied and should be confirmed from the manufacturer’s dimensional specifications.
Multiple Product Variants
Based strictly on the supplied product information, the family includes:
- Alignment: Not specified
- Head-hole configuration: Not specified
- 10 shaft-hole options: 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12
- 2 material options: SS316L / Titanium
If every shaft-hole configuration is available in both materials, this could represent up to 20 basic shaft × material combinations.
The exact number of commercially available variants should be confirmed from the official Cat. No. table.
Technical Specifications
| Specification | Product Data |
| Product Name | Locking L-Oblique Distal Radius Plate, 2.4/2.7 mm |
| Product Category | Orthopedic Trauma |
| Product Type | Locking Orthopedic Fixation Plate |
| Plate Configuration | L-Oblique |
| Anatomical Region | Distal Radius |
| System Size | 2.4/2.7 mm |
| Alignment | Not specified |
| Head Holes | Not specified |
| Shaft Hole Options | 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 |
| Number of Shaft-Hole Options | 10 |
| Materials | SS316L, Titanium |
| Potential Basic Configurations | Up to 20, subject to catalog confirmation |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
| Plate Lengths | Not provided |
| Distal Plate Width | Not provided |
| Plate Thickness | Not provided |
| L-Oblique Angle / Geometry | Not provided |
| Compatible Screw Details | Not provided |
| 2.4 / 2.7 mm Screw Assignment | Not provided |
| Screw Trajectories | Not provided |
| Titanium Grade | Not provided |
| Compatible Instrumentation | Not provided |
Technical Overview
Product Name: Locking L-Oblique Distal Radius Plate, 2.4/2.7 mm
Product Category: Orthopedic Trauma
Product Type: Locking Orthopedic Fixation Plate
Plate Type: L-Oblique Distal Radius Plate
Anatomical Region: Distal Radius
System: 2.4/2.7 mm
Alignment: Not specified
Head Holes: Not specified
Shaft Hole Options: 3, 4, 5, 6, 7, 8, 9, 10, 11, and 12
Material Options: SS316L and Titanium
Plate Geometry: Broadened oblique distal fixation region connected to an elongated shaft
Fixation Concept: Plate-and-screw internal fixation using a compatible orthopedic fixation system
Side-Specific Design: Not specified
Configuration: L-Oblique
Cat. No.: Not supplied
GTIN No.: Not supplied
Plate Dimensions: Not supplied
Specific Titanium Grade: Not supplied
Specific Screw Compatibility: Not supplied
Product Features
- Locking orthopedic fixation plate design.
- Specifically identified as an L-Oblique Distal Radius Plate.
- Associated with a 2.4/2.7 mm fixation system.
- Alignment is not specified in the supplied product data.
- No numerical head-hole count is specified.
- Available with 3 shaft holes.
- Available with 4 shaft holes.
- Available with 5 shaft holes.
- Available with 6 shaft holes.
- Available with 7 shaft holes.
- Available with 8 shaft holes.
- Available with 9 shaft holes.
- Available with 10 shaft holes.
- Available with 11 shaft holes.
- Available with 12 shaft holes.
- Provides 10 shaft-hole configurations.
- Available in SS316L.
- Available in Titanium.
- Features a broadened distal fixation region.
- Features an oblique distal-head-to-shaft relationship.
- Features an elongated longitudinal shaft.
- Includes multiple visible distal fixation openings.
- Includes circular and elongated / oblong openings.
- Supports multiple potential plate-length configurations.
- Exact L-Oblique angle and anatomical contour should be confirmed from official technical drawings.
- Exact distal head-hole count and classification should be confirmed from the manufacturer’s documentation.
- Exact compatible 2.4 mm / 2.7 mm screw assignment should be confirmed from the product system documentation.
- Exact screw trajectories and locking characteristics should be confirmed from approved technical drawings.
- Exact plate lengths, distal width, contour, angle, and thickness should be confirmed from the manufacturer’s dimensional specifications.
- Individual Cat. No. and GTIN No. should be added when the official product table is available.
- Approved indications, contraindications, and surgical technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.