Product Explanation
The Cortical Bone Screw, Self Tapping Ø 2.7 mm is an orthopedic screw intended to form part of a compatible internal fixation construct.
A simplified fixation concept can be represented as:
Prepared Bone / Compatible Plate → 2.7 mm Cortical Screw → Thread Engagement → Internal Fixation Construct
The product is specifically identified as a:
Cortical Bone Screw
with a:
Self Tapping
design.
The nominal screw diameter is:
Ø 2.7 mm
and the available length range extends from:
6 mm to 40 mm
with:
2 mm length increments
providing multiple screw lengths for selection according to the compatible fixation construct and approved surgical technique.
Product Components and Design
- Cortical Screw Body
The implant consists of a metallic screw body incorporating a threaded shaft, distal tip, and proximal screw head.
According to the supplied product designation, it is specifically classified as a:
Cortical Bone Screw
The exact total dimensions, core diameter, mechanical characteristics, and thread specifications should be confirmed from the manufacturer’s technical drawing.
- Ø 2.7 mm Nominal Diameter
The supplied product information specifies:
Diameter: Ø 2.7 mm
This represents the nominal screw diameter provided in the product title.
The supplied image does not separately define:
- Major thread diameter.
- Minor / core diameter.
- Thread pitch.
- Thread depth.
- Thread flank geometry.
These parameters should therefore be confirmed from official dimensional specifications.
- Self-Tapping Design
The product is specifically identified as:
Self Tapping
indicating a manufacturer-defined self-tapping screw geometry.
The exact:
- Cutting flute geometry.
- Tip design.
- Thread-start geometry.
- Number of cutting features.
- Required drilling technique.
- Need for pre-tapping under specific conditions.
are not provided in the supplied image.
These details should be confirmed from the manufacturer’s surgical technique.
- Threaded Fixation Profile
The supplied product image visibly shows a threaded shaft extending along a substantial portion of the screw body.
The thread profile is intended to provide engagement within compatible bone when used according to the approved fixation technique.
The exact thread pitch, lead, depth, threaded length, and cortical engagement characteristics are not supplied.
- Screw Tip
The distal end incorporates a defined screw tip associated with the product’s self-tapping designation.
The exact:
- Tip angle.
- Cutting geometry.
- Flute dimensions.
- Penetration characteristics.
cannot be reliably determined from the supplied image alone.
- Screw Head and Drive Interface
The supplied image shows a proximal screw head containing an insertion interface.
However, the exact driver type is not specified.
Therefore, the product sheet should not identify the drive as Hex, Torx, Star, or another interface without official documentation.
The exact:
- Head diameter.
- Head height.
- Head profile.
- Drive geometry.
- Compatible screwdriver.
should be confirmed from the manufacturer’s system specifications.
Length Configurations
According to the supplied product information:
Length: 6–40 mm (2 mm Variation)
This results in the following configurations:
| No. | Length |
| 1 | 6 mm |
| 2 | 8 mm |
| 3 | 10 mm |
| 4 | 12 mm |
| 5 | 14 mm |
| 6 | 16 mm |
| 7 | 18 mm |
| 8 | 20 mm |
| 9 | 22 mm |
| 10 | 24 mm |
| 11 | 26 mm |
| 12 | 28 mm |
| 13 | 30 mm |
| 14 | 32 mm |
| 15 | 34 mm |
| 16 | 36 mm |
| 17 | 38 mm |
| 18 | 40 mm |
This provides a total of:
18 length configurations
for the supplied Ø 2.7 mm screw family.
Material Options
According to the supplied product data, the screw is available in:
SS316L
and
Titanium
The exact Titanium alloy or grade is not specified in the supplied image and should be confirmed from the manufacturer’s official material documentation.
Intended Use
The Cortical Bone Screw, Self Tapping Ø 2.7 mm is designed for use as part of a compatible orthopedic fixation system according to the approved indications, surgical technique, and Instructions for Use.
Potential applications may involve fixation through compatible plates or other approved orthopedic components where a 2.7 mm cortical screw is specified.
The exact approved anatomical regions and compatible implant systems are not stated in the supplied image.
Screw selection may depend on factors including:
- Anatomical location.
- Bone dimensions.
- Cortical bone thickness.
- Required screw diameter.
- Required screw length.
- Compatible fixation plate.
- Compatible implant system.
- Bone quality.
- Required fixation construct.
- Drilling technique.
- Screw trajectory.
- Compatible instrumentation.
- Preoperative planning.
- Intraoperative measurement.
The screw should be selected and implanted by a qualified orthopedic surgeon in accordance with the approved surgical technique and Instructions for Use.
Key Benefits
Self-Tapping Screw Design
The product is specifically identified as:
Self Tapping
providing a defined thread-entry / tip configuration within the screw family.
The exact surgical preparation requirements should be confirmed from the manufacturer’s technique guide.
Ø 2.7 mm Nominal Diameter
The product provides a defined:
2.7 mm nominal screw diameter
within the compatible orthopedic fixation system.
Wide Length Range
The screw family covers:
6 mm to 40 mm
providing a broad range of available fixation lengths.
2 mm Length Increments
The product is supplied with:
2 mm increments
throughout the stated range.
This creates closely spaced screw-length options.
18 Length Configurations
The complete supplied range provides:
18 screw lengths
comprising:
6 / 8 / 10 / 12 / 14 / 16 / 18 / 20 / 22 / 24 / 26 / 28 / 30 / 32 / 34 / 36 / 38 / 40 mm
Two Material Options
According to the supplied product information, the screw is available in:
SS316L
and
Titanium
Multiple Product Variants
Based strictly on the supplied product information, the family includes:
- 1 nominal diameter: 2.7 mm
- 18 length options: 6–40 mm in 2 mm increments
- 2 material options: SS316L / Titanium
If every length is available in both materials, this could represent:
18 × 2 = up to 36 basic length × material configurations
The exact commercial matrix should be confirmed from the official Cat. No. and GTIN table.
Technical Specifications
| Specification | Product Data |
| Product Name | Cortical Bone Screw, Self Tapping Ø 2.7 mm |
| Product Type | Cortical Bone Screw |
| Design | Self Tapping |
| Nominal Diameter | Ø 2.7 mm |
| Length Range | 6–40 mm |
| Length Increment | 2 mm |
| Available Lengths | 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40 mm |
| Number of Length Options | 18 |
| Materials | SS316L, Titanium |
| Potential Basic Configurations | Up to 36, subject to catalog confirmation |
| Thread Type | Cortical screw thread; exact geometry not provided |
| Thread Pitch | Not provided |
| Core Diameter | Not provided |
| Threaded Length | Not provided |
| Head Diameter | Not provided |
| Head Height | Not provided |
| Drive Interface | Not provided |
| Tip Geometry | Self-tapping; exact geometry not provided |
| Compatible Plate / Implant | Not provided |
| Compatible Drill Size | Not provided |
| Compatible Tap | Not provided |
| Compatible Screwdriver | Not provided |
| Titanium Grade | Not provided |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
Technical Overview
Product Name: Cortical Bone Screw, Self Tapping Ø 2.7 mm
Product Type: Orthopedic Cortical Bone Screw
Screw Design: Self Tapping
Nominal Diameter: Ø 2.7 mm
Length Range: 6–40 mm
Length Increment: 2 mm
Length Options: 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, and 40 mm
Number of Length Options: 18
Material Options: SS316L and Titanium
Fixation Concept: Threaded cortical bone fixation within a compatible orthopedic fixation construct
Self-Tapping Feature: Yes, according to supplied product designation
Thread Geometry: Not supplied
Head / Drive Geometry: Not supplied
Compatible Implant System: Not supplied
Specific Titanium Grade: Not supplied
Compatible Instrumentation: Not supplied
Cat. No.: Not supplied
GTIN No.: Not supplied
Product Features
- Orthopedic cortical fixation screw.
- Specifically identified as a Self-Tapping Cortical Bone Screw.
- Nominal diameter of Ø 2.7 mm.
- Available from 6 mm to 40 mm.
- Uses 2 mm length increments.
- Provides 18 length configurations.
- Available in SS316L.
- Available in Titanium.
- Features a threaded shaft.
- Features a defined distal screw tip.
- Features a proximal insertion head.
- Self-tapping characteristic identified in the supplied product name.
- Supports multiple screw-length selections within the same diameter family.
- Exact thread pitch should be confirmed from technical drawings.
- Exact core diameter should be confirmed.
- Exact threaded length should be confirmed.
- Exact head dimensions should be confirmed.
- Exact drive interface should be confirmed.
- Exact drilling requirements should be confirmed from the surgical technique.
- Exact compatible plate / implant system should be confirmed from official documentation.
- Exact Titanium alloy should be confirmed.
- Individual Cat. No. and GTIN No. should be added when the official product matrix is available.
- Approved indications, contraindications, and insertion technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.