Product Explanation
The Locking Head Bone Screw, Self Tapping Ø 2.7 mm is an orthopedic screw intended to form part of a compatible locking plate-and-screw fixation construct.
A simplified fixation concept can be represented as:
Prepared Bone → Compatible Locking Plate → 2.7 mm Locking Head Screw → Locked Plate–Screw Construct
The product combines three principal characteristics:
Locking Head
Self Tapping
Ø 2.7 mm nominal diameter
The locking-head configuration indicates compatibility with a manufacturer-defined locking interface within an appropriate plate hole.
The exact locking mechanism—including head threading, locking angle, thread pitch, or possible variable-angle functionality—is not defined in the supplied image and should not be assumed without the manufacturer’s official system documentation.
Product Components and Design
- Locking Head
The product is specifically identified as a:
Locking Head Bone Screw
The proximal screw head is designed to interface with a compatible locking plate system according to the manufacturer’s approved design.
The supplied product data does not specify:
- Locking-head thread pitch.
- Head thread diameter.
- Locking interface geometry.
- Locking angle.
- Variable-angle compatibility.
- Compatible plate-hole geometry.
These parameters should be confirmed from the manufacturer’s engineering documentation.
- Ø 2.7 mm Screw Body
The supplied product title specifies:
Ø 2.7 mm
as the nominal screw diameter.
The supplied image does not separately provide:
- Major thread diameter.
- Minor / core diameter.
- Thread depth.
- Bone-thread pitch.
- Thread profile.
- Dimensional tolerances.
Therefore, these specifications should be obtained from the official dimensional drawing.
- Self-Tapping Design
The screw is specifically identified as:
Self Tapping
indicating a manufacturer-defined self-tapping tip / thread-entry geometry.
The exact:
- Cutting flute design.
- Tip geometry.
- Thread-start configuration.
- Drilling requirements.
- Need for pre-tapping in specific situations.
are not defined in the supplied image.
These details should be confirmed from the approved surgical technique.
- Threaded Shaft
The supplied product image visually shows a threaded shaft extending along a substantial portion of the screw body.
The exact:
- Thread pitch.
- Thread depth.
- Thread lead.
- Threaded length.
- Core diameter.
are not supplied.
- Screw Tip
The distal end incorporates a defined tip associated with the screw’s Self Tapping designation.
The exact cutting geometry, tip angle, and penetration characteristics should not be inferred solely from the image.
- Drive Interface
The supplied image shows an insertion interface within the proximal screw head.
However, the exact drive type is not specified.
Therefore, the product sheet should not identify it as:
Hex / Torx / Star / Stardrive / other
without official technical confirmation.
The compatible screwdriver should be confirmed from the manufacturer’s instrumentation documentation.
Length Configurations
According to the supplied product data, there are two length ranges.
Range 1 — 10–38 mm in 2 mm increments
This provides 15 length options:
10 / 12 / 14 / 16 / 18 / 20 / 22 / 24 / 26 / 28 / 30 / 32 / 34 / 36 / 38 mm
Range 2 — 40–60 mm in 5 mm increments
This provides 5 length options:
40 / 45 / 50 / 55 / 60 mm
Therefore, the complete product family includes:
15 + 5 = 20 length configurations
Material Options
According to the supplied product information, the screw is available in:
SS316L
and
Titanium
The exact Titanium alloy or grade is not specified in the supplied image and should be confirmed from the manufacturer’s official material documentation.
Intended Use
The Locking Head Bone Screw, Self Tapping Ø 2.7 mm is designed for use as part of a compatible locking orthopedic fixation system according to the approved indications, surgical technique, and Instructions for Use.
Potential applications may involve fixation through compatible locking plate holes where a 2.7 mm locking head screw is specified.
The exact approved anatomical applications and compatible plate systems are not stated in the supplied image.
Screw selection may depend on factors including:
- Anatomical location.
- Compatible locking plate.
- Plate-hole specification.
- Bone dimensions.
- Required screw diameter.
- Required screw length.
- Bone quality.
- Required fixation construct.
- Screw trajectory.
- Compatible drill.
- Compatible depth gauge.
- Compatible screwdriver.
- Preoperative planning.
- Intraoperative measurement.
The screw should be selected and implanted by a qualified orthopedic surgeon in accordance with the approved surgical technique and Instructions for Use.
Key Benefits
Locking Head Configuration
The product is specifically identified as a:
Locking Head Bone Screw
indicating compatibility with a manufacturer-defined locking plate interface.
The exact locking-head geometry should be confirmed from official system documentation.
Self-Tapping Design
The screw is specifically identified as:
Self Tapping
providing a defined self-tapping tip / thread-entry configuration.
Ø 2.7 mm Nominal Diameter
The product provides a nominal:
2.7 mm screw diameter
within the compatible orthopedic fixation system.
Fine 2 mm Length Increments
From:
10 mm to 38 mm
the screw is supplied in:
2 mm increments
providing closely spaced length options.
Extended 5 mm Length Increments
From:
40 mm to 60 mm
the screw is supplied in:
5 mm increments.
20 Length Configurations
The complete supplied range includes:
20 individual screw lengths
comprising:
10 / 12 / 14 / 16 / 18 / 20 / 22 / 24 / 26 / 28 / 30 / 32 / 34 / 36 / 38 / 40 / 45 / 50 / 55 / 60 mm
Two Material Options
According to the supplied product data, the screw is available in:
SS316L
and
Titanium
Multiple Product Variants
Based strictly on the supplied information, the family includes:
- 1 nominal diameter: Ø 2.7 mm
- 1 locking-head configuration
- 20 length options
- 2 material options: SS316L / Titanium
If every listed length is available in both materials, this could theoretically represent:
20 × 2 = up to 40 basic length × material configurations
The exact commercial matrix should be confirmed from the official Cat. No. / GTIN table.
Technical Specifications
| Specification | Product Data |
| Product Name | Locking Head Bone Screw, Self Tapping Ø 2.7 mm |
| Product Type | Locking Head Bone Screw |
| Design | Self Tapping |
| Head Type | Locking Head |
| Nominal Diameter | Ø 2.7 mm |
| Overall Length Range | 10–60 mm |
| Range 1 | 10–38 mm |
| Range 1 Increment | 2 mm |
| Range 2 | 40–60 mm |
| Range 2 Increment | 5 mm |
| Available Lengths | 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40, 45, 50, 55, 60 mm |
| Number of Range 1 Lengths | 15 |
| Number of Range 2 Lengths | 5 |
| Total Number of Length Options | 20 |
| Materials | SS316L, Titanium |
| Potential Basic Configurations | Up to 40, subject to catalog confirmation |
| Bone Thread Geometry | Not provided |
| Thread Pitch | Not provided |
| Core Diameter | Not provided |
| Threaded Length | Not provided |
| Locking Head Geometry | Not provided |
| Head Diameter | Not provided |
| Head Height | Not provided |
| Drive Interface | Not provided |
| Tip Geometry | Self-tapping; exact geometry not provided |
| Compatible Locking Plate | Not provided |
| Compatible Plate Hole | Not provided |
| Compatible Drill Size | Not provided |
| Compatible Tap | Not provided |
| Compatible Screwdriver | Not provided |
| Titanium Grade | Not provided |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
Technical Overview
Product Name: Locking Head Bone Screw, Self Tapping Ø 2.7 mm
Product Type: Orthopedic Locking Head Bone Screw
Screw Design: Self Tapping
Head Configuration: Locking Head
Nominal Diameter: Ø 2.7 mm
Overall Length Range: 10–60 mm
10–38 mm Range: 2 mm increments
40–60 mm Range: 5 mm increments
Total Length Options: 20
Material Options: SS316L and Titanium
Fixation Concept: Locked plate-and-screw fixation within a compatible orthopedic fixation system
Bone Thread Geometry: Not supplied
Locking Head Geometry: Not supplied
Head / Drive Geometry: Not supplied
Compatible Implant System: Not supplied
Specific Titanium Grade: Not supplied
Compatible Instrumentation: Not supplied
Cat. No.: Not supplied
GTIN No.: Not supplied
Product Features
- Orthopedic locking fixation screw.
- Specifically identified as a Locking Head Bone Screw.
- Specifically identified as Self Tapping.
- Nominal diameter of Ø 2.7 mm.
- Available from 10 mm to 60 mm.
- Uses 2 mm increments from 10 mm to 38 mm.
- Uses 5 mm increments from 40 mm to 60 mm.
- Provides 15 lengths in the first range.
- Provides 5 lengths in the second range.
- Provides 20 total length configurations.
- Available in SS316L.
- Available in Titanium.
- Features a threaded bone-engaging shaft.
- Features a manufacturer-defined locking head.
- Features a self-tapping distal configuration.
- Includes a proximal insertion interface.
- Intended for use with a compatible locking plate system.
- Exact bone-thread pitch should be confirmed from technical drawings.
- Exact locking-head interface geometry should be confirmed.
- Exact core diameter should be confirmed.
- Exact head dimensions should be confirmed.
- Exact drive interface should be confirmed.
- Exact drilling and tapping requirements should be confirmed from the surgical technique.
- Exact compatible locking plate and plate-hole geometry should be confirmed from official system documentation.
- Exact Titanium alloy should be confirmed.
- Individual Cat. No. and GTIN No. should be added when the official product matrix is available.
- Approved indications, contraindications, and insertion technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.