General Spine Fixation System: Comprehensive Spinal Implant Solutions from AMSEO Industries

Modern spine implant portfolios require a broad selection of components rather than a single fixation device. Cervical plates, spinal screws, interbody cages, hooks, connectors, meshes, rods, and other components must be available in multiple dimensions and configurations to address different product requirements within spinal fixation systems.

AMSEO Industries offers a comprehensive General Spine Fixation System covering cervical, thoracic, lumbar, posterior fixation, interbody, corpectomy, and supporting spinal implant components.

The AMSEO catalogue brings together titanium fixation components, PEEK and titanium cages, mono axial and poly axial screw families, reduction screws, spinal rods, hooks, connectors, and mesh products within one structured orthopedic portfolio.

Learn more about AMSEO’s orthopedic manufacturing division through AMSEO Industries and explore the dedicated General Spine System product category.

What Is Included in the AMSEO General Spine Fixation System?

The AMSEO General Spine Fixation System catalogue includes multiple product groups for different spinal regions and fixation configurations.

The portfolio includes:

Anterior cervical plates
Lateral mass cervical plates
Occipital-cervical plates
Anterior thoracic plates
Thoracic vertebral body plates
Cervical cages
Lumbar PLIF cages
TLIF cages
Telescopic corpectomy cages
Cervical screws
Lateral mass cervical screws
Thoracic vertebral body screws
Mono axial screws
Poly axial screws
Spondylolisthesis reduction screws
Vertebroplasty poly axial screws
Spinal hooks
Cross connectors
Slotted and threaded connectors
Titanium cranial mesh
Pira Mesh configurations
Titanium spine rods

The catalogue uses individual AMSEO catalogue numbers and GTIN numbers for many configurations, supporting accurate product identification, procurement, and inventory management.

For a wider view of the company’s implant portfolio, visit AMSEO Products.

Cervical Spine Fixation Components

Cervical fixation represents a major section of the AMSEO General Spine Fixation System.

The portfolio contains plates, screws, cages, lateral mass components, and occipital-cervical fixation products.

Anterior Cervical Locked Plate

AMSEO lists an Anterior Cervical Locked Plate manufactured from titanium under catalogue family AMS 514.200.000.

Available plate lengths extend from 34 mm to 58 mm, with individual catalogue and GTIN numbers assigned to each listed length.

The range provides multiple dimensions within one anterior cervical plate family for organized product selection.

Lateral Mass Cervical Plates

The catalogue also includes Lateral Mass Cervical Plates in multiple configurations.

Three plate families are listed:

Lateral Mass Cervical Plate — 11 mm
Lateral Mass Cervical Plate — 13 mm
Lateral Mass Cervical Plate — 15 mm

The 11 mm family includes versions from 2 holes through 8 holes, while the 13 mm and 15 mm families provide corresponding multi-hole configurations. All are identified as titanium products in the catalogue.

Occipital-Cervical Plate

AMSEO’s cervical portfolio extends to the Occipital-Cervical Plate, also listed as titanium.

The catalogue provides lengths of:

40 mm
50 mm
60 mm

Each version has its own catalogue and GTIN identification.

Together, the anterior cervical, lateral mass, and occipital-cervical plate families form a substantial cervical fixation section within the overall spine portfolio.

Cervical Spine Cages

The AMSEO General Spine Fixation System includes dedicated PEEK cervical cages.

Both Cervical Cage Large and Cervical Cage Small families are included in the catalogue.

The listed sizes extend from:

3 mm through 9 mm

for the respective configurations.

The use of separate catalogue numbers helps distinguish each cage configuration during product selection and purchasing processes.

Cervical Screws

AMSEO provides multiple cervical screw families within the General Spine Fixation System.

Cervical Screw 3.5 mm

The titanium Cervical Screw 3.5 mm range includes lengths starting at 8 mm and extending through 38 mm.

Cervical Screw 4.0 mm

A separate titanium Cervical Screw 4.0 mm family also includes multiple lengths from 8 mm through 38 mm.

This broad dimensional range creates multiple product configurations within AMSEO’s cervical fixation catalogue.

Lateral Mass Cervical Screws

Dedicated Lateral Mass Cervical Screws are also included.

The catalogue lists both:

Lateral Mass Cervical Screw — 3.5 mm
Lateral Mass Cervical Screw — 4.0 mm

The 4.0 mm titanium family includes lengths ranging from 8 mm to 38 mm, while the 3.5 mm range is similarly presented through multiple length configurations.

These products complement the lateral mass cervical plate families presented earlier in the catalogue.

Thoracic Spine Fixation Components

AMSEO’s General Spine Fixation System also covers dedicated thoracic components.

Anterior Thoracic Plate

The titanium Anterior Thoracic Plate is listed in several lengths:

33 mm
48 mm
65 mm
70 mm
75 mm

The catalogue additionally contains dedicated right and left Anterior Thoracic Vertebral Body Plates.

Anterior Thoracic Vertebral Body Plates

Both right and left plate configurations are available.

Each family includes listed lengths of:

13 mm
15 mm
18 mm

By cataloguing the right and left configurations separately, AMSEO provides distinct product identification for the respective components.

Thoracic Vertebral Body Screws

The thoracic plate portfolio is complemented by titanium Anterior Thoracic Vertebral Body Screws.

The catalogue includes:

5.5 mm Thoracic Vertebral Body Screw

Available in listed lengths from 30 mm to 50 mm.

6.5 mm Thoracic Vertebral Body Screw

Also available from 30 mm to 50 mm.

These configurations extend the thoracic section of the General Spine Fixation System beyond plates to dedicated screw families.

Lumbar PLIF Cages

Interbody cage products represent another important part of AMSEO’s spine portfolio.

The catalogue includes Lumbar Cage (PLIF) configurations in two material categories:

PEEK
Titanium

Both ranges include listed heights from:

7 mm to 15 mm.

The presence of both PEEK and titanium versions provides clearly differentiated material categories within the PLIF cage range.

TLIF PEEK Cages

AMSEO also provides a Cage Banana (TLIF) family manufactured from PEEK.

Listed sizes include:

7 mm
8 mm
9 mm
10 mm
11 mm
12 mm
13 mm
14 mm

Each size has an individual catalogue and GTIN reference.

This TLIF cage family complements the PLIF cage portfolio and broadens AMSEO’s selection of lumbar interbody products.

Telescopic Corpectomy Cages

One of the more extensive cage categories in the AMSEO General Spine System is the Telescopic Corpectomy Cage portfolio.

The catalogue identifies these components as titanium and lists several cage families in different dimensions.

These include configurations grouped under:

12 mm
14 mm
16 mm
18 mm
20 mm

with multiple dimensional combinations listed across the respective catalogue families.
The 16 mm family, for example, contains multiple configurations ranging from compact dimensions to larger cage configurations, each with dedicated catalogue identification.

Posterior Spinal Fixation Screws

A major section of the AMSEO General Spine Fixation System is devoted to posterior screw configurations.

The catalogue includes several distinct screw families rather than grouping all spinal screws under one product designation.

Mono Axial Screws

AMSEO’s Mono Axial Screw portfolio contains multiple titanium screw diameters.

Catalogue families include sizes such as:

4.5 mm
5.0 mm
5.5 mm
6.0 mm
6.5 mm
7.0 mm
7.5 mm
8.0 mm

Several of these families are available across extensive length ranges.

For example, the 4.5 mm and 5.0 mm mono axial screw families are listed from 25 mm through 80 mm.

The 6.5 mm and 7.0 mm families also cover 25–80 mm configurations.

The broad diameter and length structure creates a substantial mono axial screw portfolio within AMSEO’s spine system.

Poly Axial Screws

AMSEO also provides multiple Poly Axial Screw configurations.

The catalogue includes titanium poly axial screw families in several diameters, with extensive length selections.

Examples include:

4.5 mm
5.0 mm
5.25 mm
5.5 mm
6.0 mm
6.5 mm
7.0 mm

The 4.5 mm and 5.0 mm families, for example, include lengths from 25 mm to 80 mm.

Several additional diameter families follow the same structured approach, with dedicated catalogue and GTIN numbers for individual configurations.

Poly Axial Spondylolisthesis Reduction Screws

The catalogue distinguishes standard poly axial screws from a dedicated Poly Axial Spondylolisthesis Reduction Screw portfolio.

This titanium product category includes multiple diameters, including:

5.0 mm
5.5 mm
6.0 mm
6.5 mm
7.0 mm
7.5 mm
8.0 mm

Many configurations are listed across lengths from 25 mm to 80 mm.
Separating standard poly axial and reduction screw families makes product identification clearer for distributors, procurement departments, and technical teams reviewing the catalogue.

Vertebroplasty Poly Axial Screws

AMSEO’s catalogue additionally includes a Vertebroplasty Poly Axial Screw range.

The listed titanium configurations include:

4.5 mm
5.5 mm
6.5 mm

with lengths from 35 mm to 50 mm for the listed families.

This category adds another dedicated screw family to AMSEO’s broader posterior spinal implant portfolio.

Spinal Hooks and Connectors

Spinal fixation systems also require connection components, and AMSEO’s catalogue contains several dedicated families.

Hooks

Titanium hook products include:

Closed Hook
Open Laminar Hook
Open Pedicular Hook

The Closed Hook is available in small, medium, and large configurations.

Open Laminar and Open Pedicular Hooks are also provided in small, medium, and large versions.

Cross Connectors and Slotted Connectors

The catalogue lists a titanium Cross Connector Spine in small and large sizes.

A separate Slotted Connector family includes:

Universal
Standard
Long
Short
Extra-Long
Extra-Short

This range provides multiple connector configurations within the overall spinal fixation portfolio.

Threaded Connector

AMSEO also includes a dedicated Threaded Connector manufactured from titanium.

Combined with the other hook and connector families, these components form the supporting connection section of the General Spine Fixation System.

Cranial Mesh and Bayonet Screws

Although the catalogue is primarily structured around spinal fixation, it also includes Cranial Mesh and corresponding Cranial Mesh Bayonet Screws.

The titanium Cranial Mesh Bayonet Screw range includes lengths of:

5 mm
7 mm
9 mm

The titanium Cranial Mesh is listed in dimensions including:

0.6 mm × 100 mm × 100 mm
0.6 mm × 100 mm × 200 mm

These components are separately catalogued with corresponding AMSEO and GTIN identification numbers.

Titanium Pira Mesh Portfolio

The General Spine System catalogue also contains several Pira Mesh families manufactured from titanium.

The 8 mm family alone is listed across a broad sequence of lengths, while the catalogue continues with additional Pira Mesh product families on subsequent pages.

This creates another extensive size matrix within the AMSEO spinal implant catalogue.

Titanium Spine Rods

AMSEO’s General Spine Fixation System concludes with dedicated Spine ROD families manufactured from titanium.

One catalogue family includes listed lengths starting at 40 mm and extending to 450 mm.

A second titanium Spine ROD family extends from 40 mm up to 500 mm.

The availability of numerous rod lengths complements AMSEO’s mono axial screws, poly axial screws, reduction screws, hooks, and connector products within the posterior fixation portfolio.

Titanium and PEEK Materials Across the Spine Portfolio

Material identification is consistently included throughout the AMSEO catalogue.

A large proportion of the fixation components—including plates, screws, hooks, connectors, corpectomy cages, meshes, and rods—are identified as titanium.

The interbody cage portfolio also includes PEEK configurations, including cervical cages, PLIF cages, and the TLIF Banana Cage.

For example, AMSEO’s PLIF cage family is specifically listed in both PEEK and titanium versions.

This allows material type to form part of the product identification process alongside size, catalogue number, and GTIN.

Structured Product Identification for Distributors and Procurement Teams

A key characteristic of the AMSEO General Spine Fixation System catalogue is its detailed product coding structure.

Across the catalogue, components are typically organized according to:

Product family
Material
Diameter or dimensions
Length
Number of holes, where applicable
Catalogue number
GTIN number

For international orthopedic distributors, medical-device importers, hospital procurement departments, and inventory teams, this structured approach can simplify product differentiation across an extensive range of spinal implant configurations.

Technical specifications and ordering requirements should always be confirmed against the applicable AMSEO catalogue and official product documentation.

Spine Implant Manufacturing at AMSEO Industries

AMSEO Industries is part of the wider AMSEO Group medical-device portfolio. The company’s website identifies Spine as one of its principal orthopedic implant categories alongside Trauma, Arthroplasty, Sports Medicine, and other product groups.

To learn more about the production infrastructure behind the portfolio, visit AMSEO Manufacturing.

For additional information relating to the company’s quality framework and documentation, explore AMSEO Quality and AMSEO Certificates.

Research and Development in Orthopedic Spine Products

Product development in spinal implant manufacturing involves ongoing work across materials, design, testing, and manufacturing technologies.

AMSEO states that its Research & Development department focuses on material innovation, design optimization, quality and safety testing, and the development of advanced medical solutions. The company also states that its R&D activities involve collaboration with doctors, surgeons, researchers, academic institutions, and specialized laboratories.

Learn more through AMSEO Research & Development.

A Comprehensive Spine Portfolio for International Healthcare Partners

For medical-device distributors and healthcare procurement organizations, breadth of portfolio can be an important factor when evaluating a spinal implant manufacturer.

AMSEO’s General Spine Fixation System combines multiple component categories under one catalogue, including:

Cervical fixation plates and screws
Thoracic plates and vertebral body screws
PEEK and titanium interbody cages
TLIF and PLIF cage configurations
Telescopic corpectomy cages
Mono axial screws
Poly axial screws
Reduction screws
Vertebroplasty poly axial screws
Hooks and connectors
Cranial mesh
Titanium Pira Mesh
Titanium spine rods

This range creates an integrated product portfolio extending across multiple spinal fixation component families.

International partners can learn more about AMSEO’s commercial presence through AMSEO Global Business.

Organizations interested in representing AMSEO products can also visit Become an AMSEO Distributor.

Frequently Asked Questions About AMSEO General Spine Fixation Systems

What products are included in the AMSEO General Spine Fixation System?

The catalogue includes cervical and thoracic plates, cervical and lateral mass screws, PLIF and TLIF cages, telescopic corpectomy cages, mono axial and poly axial screws, reduction screws, vertebroplasty screws, hooks, connectors, meshes, and spine rods.

Does AMSEO offer cervical spine fixation products?

Yes. The catalogue includes anterior cervical locked plates, lateral mass cervical plates, occipital-cervical plates, cervical screws, lateral mass screws, and PEEK cervical cages.

Does AMSEO manufacture PEEK spinal cages?

The catalogue identifies multiple PEEK cage families, including cervical cages, lumbar PLIF cages, and the TLIF Banana Cage.

Are titanium spinal cages available?

Yes. The AMSEO catalogue includes titanium PLIF cages and several titanium Telescopic Corpectomy Cage configurations.

What spinal screw systems are available?

AMSEO’s catalogue includes mono axial screws, poly axial screws, poly axial spondylolisthesis reduction screws, cervical screws, lateral mass cervical screws, thoracic vertebral body screws, and vertebroplasty poly axial screws.

Does AMSEO offer different spinal rod lengths?

Yes. The catalogue includes titanium Spine ROD families with numerous lengths, including one range extending to 450 mm and another extending to 500 mm.

How can international distributors request information about AMSEO spine implants?

Medical-device distributors, importers, and healthcare organizations can submit a commercial request through AMSEO Sales Inquiry or contact the company through AMSEO Contact Us.

Explore the AMSEO General Spine Fixation System

From cervical fixation and spinal cages to posterior screw systems, reduction screws, connectors, meshes, and titanium spine rods, AMSEO Industries provides a broad General Spine Fixation System with multiple product families, sizes, materials, and catalogue configurations.

The portfolio is structured to support clear product identification for orthopedic distributors, medical-device importers, hospitals, healthcare procurement organizations, and other professional partners evaluating spinal implant systems.

Explore the complete AMSEO General Spine System portfolio or browse the wider AMSEO orthopedic product range.

For commercial requests, distribution opportunities, quotations, or additional product documentation, submit an inquiry through AMSEO Sales Inquiry.

AMSEO Industries — Not Just a Provider.