Product Explanation
The 2.4 mm VA Locking Two-Column Distal Radius Plate, Volar, Wide, 25.5 mm Width is an orthopedic fixation plate intended to form part of a compatible internal fixation construct in the distal radius region.
A simplified fixation concept can be represented as:
Distal Radius → Wide Volar Two-Column Plate → Compatible Fixation Screws → Internal Fixation Construct
The product is specifically identified as:
Volar
Wide
Two-Column
with a specified:
25.5 mm Width
The plate is selected and positioned according to the anatomical side, distal radius anatomy, fracture configuration, required fixation pattern, plate geometry, surgical plan, approved surgical technique, and Instructions for Use.
According to the supplied product information, the plate is available in:
Left / Right
configurations.
The product incorporates:
7 Head Holes
and is available with:
2 / 3 / 4 / 5 Shaft Holes
providing several configurations within the same plate family.
Product Components and Design
- Two-Column Plate Body
The implant consists of a metallic fixation plate with a broad distal fixation section transitioning into an elongated shaft.
The product is specifically identified as a:
Two-Column Distal Radius Plate
according to the supplied product designation.
The exact anatomical or biomechanical definition of the Two-Column design should be confirmed from the manufacturer’s official technical documentation rather than inferred solely from the image.
- Wide Volar Configuration
The plate is specifically designated:
Volar, Wide
indicating a defined plate geometry within the manufacturer’s distal radius fixation family.
The supplied product data specifies:
Width: 25.5 mm
This distinguishes the Wide configuration from narrower plate variants.
The exact anatomical location at which the 25.5 mm width is measured should be confirmed from the manufacturer’s engineering or dimensional drawing.
- 25.5 mm Plate Width
According to the supplied product title:
Width: 25.5 mm
This provides a defined dimensional characteristic for the Wide plate variant.
Other dimensional parameters, including overall plate length, shaft width, distal head height, and plate thickness, are not included in the supplied image.
- Distal Head Section
The broad distal section incorporates:
7 Head Holes
according to the supplied product information.
These represent the listed fixation-hole configuration within the distal plate section.
The exact compatible screw type, screw diameter, locking mechanism, permitted screw angulation, and trajectory associated with each opening are not specified in the supplied image.
- Shaft Section
The product family is available with:
2 Shaft Holes
3 Shaft Holes
4 Shaft Holes
5 Shaft Holes
providing four alternative shaft configurations.
The exact physical plate length associated with each shaft-hole configuration is not supplied.
- VA Locking Design
The product title includes:
VA Locking
This designation is reproduced directly from the supplied product information.
The exact variable-angle characteristics, permitted angulation range, locking mechanism, compatible screw specifications, and insertion technique are not provided in the supplied image and should be confirmed from the manufacturer’s official technical documentation.
- Multiple Fixation Opening Geometries
The supplied product image visually shows several opening geometries distributed throughout the distal head and shaft.
These include:
- Multiple distal fixation openings.
- Smaller circular openings.
- Larger contoured openings.
- A large central opening within the distal plate section.
- An elongated opening within the shaft.
- Additional distal shaft fixation openings.
The exact technical function of each opening—such as VA locking fixation, conventional fixation, positioning, compression, or another function—should not be inferred without reference to the approved surgical technique.
- Left and Right Configurations
The plate is available in:
Left / Right
alignment options.
This supports side-specific implant selection according to the anatomical side being treated.
The exact geometrical differences between the Left and Right versions should be confirmed from the manufacturer’s technical drawings.
- Material Options
According to the supplied product information, the plate is available in:
SS316L
and
Titanium
The exact Titanium alloy or grade is not specified in the supplied image and should be confirmed from the manufacturer’s official material specification.
Intended Use
The 2.4 mm VA Locking Two-Column Distal Radius Plate, Volar, Wide, 25.5 mm Width is designed for use as part of a compatible orthopedic fixation system involving the distal radius, according to the approved indications, surgical technique, and Instructions for Use.
The product designation identifies it as a:
Volar Distal Radius Fixation Plate
with a:
Wide Two-Column configuration
Potential applications may involve internal fixation of the distal radius where this specific plate configuration is included within the manufacturer’s approved indications.
The exact fracture patterns, fracture classifications, clinical indications, surgical approach, fixation strategy, contraindications, and patient-selection criteria must be confirmed from the official product documentation.
Plate selection may depend on factors including:
- Anatomical side.
- Distal radius anatomy.
- Fracture location and configuration.
- Required distal fixation pattern.
- Required fixation construct.
- Required plate width.
- Required shaft-hole configuration.
- Required plate length.
- Bone dimensions.
- Bone quality.
- Compatible screw selection.
- Compatible instrumentation.
- Surgical approach.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified orthopedic surgeon in accordance with the approved surgical technique and Instructions for Use.
Key Benefits
Two-Column Plate Configuration
The product is specifically identified as a:
Two-Column Distal Radius Plate
providing a distinct fixation plate geometry within the compatible distal radius system.
The exact anatomical and biomechanical function of the two-column concept should be confirmed from the manufacturer’s technical documentation.
Wide Volar Configuration
The plate is identified as:
Volar, Wide
providing a broad distal plate configuration within the product family.
This distinguishes it from narrower or standard-width variants.
Specified 25.5 mm Width
The supplied product information identifies:
Width: 25.5 mm
providing a defined dimensional parameter for implant identification and selection.
Seven Head Holes
According to the supplied product data, the plate incorporates:
7 Head Holes
providing multiple fixation positions within the distal head section.
Four Shaft-Hole Options
The plate is available with:
2 / 3 / 4 / 5 Shaft Holes
providing four shaft configurations within the same product family.
Left and Right Anatomical Options
The plate is available in:
Left / Right
versions, supporting side-specific implant selection.
VA Locking Configuration
The product is specifically identified as:
VA Locking
according to the supplied product title.
The exact angular freedom, screw angulation limits, and locking mechanism should be verified from the manufacturer’s official technical documentation.
2.4 mm Fixation System
The product belongs to a:
2.4 mm
orthopedic fixation system according to the supplied product designation.
The exact compatible screw types and hole-specific screw diameters should be verified from the official system documentation.
Two Material Options
The plate is available in:
SS316L
and
Titanium
according to the supplied product data.
Multiple Product Variants
Based strictly on the supplied product information, the family includes:
- 2 alignment options: Left / Right
- 1 profile: Wide
- 1 specified width: 25.5 mm
- 1 head-hole configuration: 7
- 4 shaft-hole options: 2 / 3 / 4 / 5
- 2 material options: SS316L / Titanium
If every shaft-hole option is available in both alignments and both materials, these parameters would represent up to 16 basic alignment × shaft × material combinations.
However, the supplied image does not provide the full commercial configuration matrix. The exact number of available variants should therefore be confirmed from the official Cat. No. table.
Technical Specifications
| Specification | Product Data |
| Product Name | 2.4 mm VA Locking Two-Column Distal Radius Plate, Volar, Wide |
| Product Category | Trauma – Radius |
| Product Type | VA Locking Orthopedic Fixation Plate |
| Plate Configuration | Two-Column |
| Approach / Profile | Volar – Wide |
| Anatomical Region | Distal Radius |
| System Size | 2.4 mm |
| Alignment | Left, Right |
| Head Holes | 7 |
| Shaft Hole Options | 2, 3, 4, 5 |
| Width | 25.5 mm |
| Materials | SS316L, Titanium |
| Potential Basic Configurations | Up to 16, subject to catalog confirmation |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
| Plate Lengths | Not provided |
| Plate Thickness | Not provided |
| Variable-Angle Range | Not provided |
| Compatible Screw Details | Not provided |
| Screw Trajectories | Not provided |
| Titanium Grade | Not provided |
| Compatible Instrumentation | Not provided |
Technical Overview
Product Name: 2.4 mm VA Locking Two-Column Distal Radius Plate, Volar, Wide
Product Category: Trauma – Radius
Product Type: VA Locking Orthopedic Fixation Plate
Plate Type: Two-Column – Volar – Wide
Anatomical Region: Distal Radius
System: 2.4 mm
Width: 25.5 mm
Alignment Options: Left and Right
Head Holes: 7
Shaft Hole Options: 2, 3, 4, and 5
Material Options: SS316L and Titanium
Plate Geometry: Broad distal fixation region with elongated shaft
Fixation Concept: Plate-and-screw internal fixation using a compatible orthopedic fixation system
Locking Design: VA Locking, according to supplied product designation
Side-Specific Design: Yes — Left / Right
Configuration: Wide
Cat. No.: Not supplied
GTIN No.: Not supplied
Specific Titanium Grade: Not supplied
Variable-Angle Range: Not supplied
Plate Lengths: Not supplied
Plate Thickness: Not supplied
Specific Screw Compatibility: Not supplied
Product Features
- VA locking orthopedic fixation plate design.
- Identified as a Two-Column Distal Radius Plate.
- Identified as a Volar plate.
- Identified as the Wide configuration.
- Specified plate width of 25.5 mm.
- Associated with a 2.4 mm fixation system.
- Available in Left and Right configurations.
- Incorporates 7 head holes.
- Available with 2 shaft holes.
- Available with 3 shaft holes.
- Available with 4 shaft holes.
- Available with 5 shaft holes.
- Available in SS316L.
- Available in Titanium.
- Features a broad distal fixation section.
- Features an elongated shaft.
- Includes multiple fixation opening geometries.
- Includes a large central distal opening visible in the supplied image.
- Includes an elongated shaft opening visible in the supplied image.
- Supports side-specific implant selection.
- Supports four shaft-hole configurations.
- Supports multiple alignment, shaft, and material variants.
- Exact location used to define the 25.5 mm width should be confirmed from the manufacturer’s technical drawing.
- Exact variable-angle range should be confirmed from official documentation.
- Exact compatible screw types and diameters should be confirmed from the manufacturer’s technical documentation.
- Exact screw trajectories should be confirmed from approved technical drawings.
- Exact plate lengths and thickness should be confirmed from the manufacturer’s dimensional specifications.
- Individual Cat. No. and GTIN No. should be added when the official product table is available.
- Approved indications, contraindications, and surgical technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.