The AMSEO Total Knee Replacement System is a Total Knee Prosthesis designed for use in Total Knee Arthroplasty (TKA) procedures to replace and reconstruct the articular surfaces of the knee when the orthopedic surgeon determines that total joint replacement is appropriate for the clinical case.
The system is intended to reconstruct the relationship between the Distal Femur and Proximal Tibia using a set of compatible orthopedic implant components, creating an Artificial Knee Articulation according to the requirements of Anatomical Alignment, Soft-Tissue Balance, and Joint Stability for each case.
Successful assembly of the Total Knee Construct depends on accurate selection of components and sizes based on Preoperative Planning, Bone Resection, Ligament Balancing, Trial Reduction, and Intraoperative Assessment, while following the approved Surgical Technique and IFU of the system.
According to the supplied product data, the system is identified as:
AMSEO TOTAL Knee SYS.
and carries the main product code:
AMS 120.700.000
This is the principal code assigned to the Total Knee Prosthesis System in the provided product table.
What Is a Total Knee Replacement System?
A Total Knee Replacement System is a system of orthopedic implants and surgical instruments designed to replace the principal articular surfaces of the knee joint.
During Total Knee Arthroplasty, damaged portions of the articular surfaces are removed and the bones are prepared to receive prosthetic components designed to restore Joint Geometry and establish a functional movement pathway for the reconstructed knee.
A Knee Prosthetic Construct typically consists of femoral and tibial components together with a compatible Bearing Interface positioned between them.
System Components
Important: The supplied product table identifies the system as a complete product under the name AMSEO TOTAL Knee SYS. and does not provide a detailed list of individual components, product codes, or component sizes. Therefore, the following sections describe the typical structure of a Total Knee Prosthesis System. Final component specifications should be confirmed using the official AMSEO Technical Datasheet.
- Femoral Component
The Femoral Component covers the prepared articular surfaces of the Distal Femur.
It is designed to articulate with the Tibial Bearing Component and contributes to reconstruction of:
- Femoral Condylar Geometry
- Flexion–Extension Mechanics
- Articular Surface
- Knee Kinematics
- Tibial Component / Tibial Baseplate
The Tibial Component is positioned on the proximal tibia after the appropriate Tibial Resection has been performed.
It functions as the supporting base for the Tibial Insert / Bearing Component within the Total Knee Construct.
- Tibial Insert / Bearing
The Tibial Insert forms the Bearing Interface between the Femoral Component and the Tibial Component.
Its articulating surface interacts with the femoral component to create movement within the Artificial Knee Joint.
The material of the insert is not specified in the supplied product data and therefore should not be stated on the website without confirmation from the official technical specifications.
- Patellar Component – If Applicable
Some Total Knee Replacement Systems may include a patellar component for cases requiring Patellar Resurfacing.
The presence of this component within the specified AMSEO System is not confirmed in the supplied product table. It should therefore be verified using the official Product Catalogue or IFU before being listed as a system component.
- Fixation Interfaces
Each implant component incorporates a geometry designed for fixation to bone or connection with other components within the system.
The specific fixation method, whether:
Cemented / Cementless / Hybrid
is not specified in the supplied product data. Therefore, none of these fixation types should be presented as a confirmed product specification without official technical documentation.
Product Application
The AMSEO Total Knee Replacement System is used in Total Knee Arthroplasty procedures when the orthopedic surgeon determines that replacement of the major articular surfaces of the knee is clinically indicated.
The general stages of a TKA procedure may include:
- Preoperative Planning & Templating
- Surgical exposure of the Knee Joint
- Femoral Bone Preparation
- Tibial Bone Preparation
- Component Sizing
- Ligament & Soft-Tissue Balancing
- Trial Component Placement
- Evaluation of:
- Alignment
- Stability
- Flexion
- Extension
- Range of Motion
- Final Implant Placement
- Final Joint Assessment
The system should be used only by a Qualified Orthopedic Surgeon in accordance with the approved Surgical Technique and IFU.
Key Benefits
Complete Knee Reconstruction Concept
The system provides a comprehensive concept for reconstruction of the principal articular surfaces of the knee during Total Knee Arthroplasty.
Integrated Femoral & Tibial Articulation
The Femoral Component works together with the Tibial Bearing Construct to create an integrated artificial knee articulation.
Support for Anatomical Reconstruction
The system allows the surgeon to select and assemble components according to:
- Bone Anatomy
- Joint Geometry
- Mechanical Alignment
- Soft-Tissue Balance
- Stability Requirements
within the available system options and approved surgical technique.
Intraoperative Assessment
The Total Knee System supports trialing and evaluation of the Joint Construct before placement of the final implant components.
Functional Joint Reconstruction
The prosthetic construct is intended to reconstruct joint movement and mechanical stability within the limits determined by the clinical condition and surgical technique.
System-Based Implant Management
A clear main system code supports:
- Product Identification
- Surgical Planning
- Procurement
- Surgical Set Preparation
- Inventory Management
- Stock Control
Technical Specifications
| Product Code | Product Description | Product Type |
| AMS 120.700.000 | AMSEO TOTAL Knee SYS. | Total Knee Replacement System / Total Knee Prosthesis |
Technical Overview
Product Name: AMSEO Total Knee Replacement System
Alternative Name: Total Knee Prosthesis
Product Code: AMS 120.700.000
Product Category: Orthopedic Joint Replacement System
Anatomical Application: Knee Joint
Procedure Category: Total Knee Arthroplasty – TKA
System Concept: Total Knee Joint Reconstruction
Primary Components: Femoral / Tibial / Bearing Components according to system configuration
Implant Selection: Based on surgical planning and intraoperative assessment
Manufacturer / Product Family Identification: AMSEO Total Knee System
Product Features
- Complete Total Knee Prosthesis System Concept
- Designed for Total Knee Arthroplasty – TKA
- Focused on reconstruction of the Femoral–Tibial Articulation
- System based on mutually compatible implant components
- Supports Component Sizing and Trialing
- Suitable for planning using Preoperative Templating
- Supports assessment of Mechanical Alignment during surgery
- Allows evaluation of Flexion and Extension before placement of the final components
- Supports Ligament Balancing according to the approved surgical technique
- Allows creation of a Knee Construct according to anatomy and clinical requirements
- Functions through compatible Femoral / Tibial / Bearing Components
- Clear primary system code: AMS 120.700.000
- Facilitates System Identification within the product catalogue
- Supports Surgical Set Preparation and Implant Inventory Management
- Suitable for integration into hospital and surgical-center Procurement and Stock Management systems
Reviews
There are no reviews yet.