The Anterior Thoracic Vertebral Body Plate (Right) is a titanium spinal fixation implant designed for use within compatible anterior thoracic spine internal fixation systems, specifically in a right-sided plate configuration according to the approved indications and surgical technique.
The implant features a contoured plate body with multiple screw fixation interfaces distributed across its proximal and distal regions. These fixation points are designed to accommodate compatible spinal fixation screws and form a stable plate-and-screw construct across the targeted thoracic vertebral body region.
According to the supplied catalog information, the implant is manufactured from:
Material: Titanium
The product family is listed under:
Cat. No.: AMS 508.001.000
The plate is available in three configurations:
13 mm / 15 mm / 18 mm
This range provides multiple options for implant selection based on thoracic anatomy, vertebral body dimensions, fixation level, required plate positioning, and intraoperative requirements.
Each configuration carries a dedicated Cat. No. and GTIN No., supporting accurate implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.
Product Explanation
The Anterior Thoracic Vertebral Body Plate (Right) is a spinal internal fixation plate designed to be positioned on the anterior thoracic vertebral body region as part of a compatible right-sided stabilization construct.
A simplified fixation concept can be represented as:
Thoracic Vertebral Body → Compatible Spinal Screws → Right Anterior Thoracic Vertebral Body Plate → Thoracic Fixation Construct
The plate provides multiple fixation interfaces for screw placement and is selected according to the patient’s anatomy and the planned thoracic stabilization construct.
Product Components and Design
- Titanium Plate Body
The primary structural component is manufactured from Titanium, according to the catalog.
The contoured plate body provides the main supporting structure of the fixation construct.
- Proximal Fixation Section
The superior portion of the plate includes multiple fixation interfaces for compatible screws.
The exact screw diameter, screw angle, and locking characteristics are not specified in the supplied data.
- Distal Fixation Section
The opposite end of the plate incorporates additional fixation points to complete the plate-and-screw construct.
- Central Contoured Plate Section
The central portion connects the proximal and distal fixation regions and forms the structural bridge of the implant.
The precise curvature and anatomical contour specifications are not provided.
- Right-Sided Configuration
The product is specifically identified as:
Anterior Thoracic Vertebral Body Plate (Right)
indicating a dedicated right-sided implant configuration within the product family.
- Length-Specific Configurations
Available lengths are:
- 13 mm
- 15 mm
- 18 mm
Intended Use
The Anterior Thoracic Vertebral Body Plate (Right) is intended for use within compatible anterior thoracic spine fixation systems, according to the manufacturer’s approved indications and Instructions for Use.
Potential applications, where included within the approved indications, may include:
- Anterior thoracic vertebral body stabilization.
- Right-sided thoracic plate-and-screw fixation.
- Thoracic spinal reconstruction procedures.
- Internal fixation of appropriate thoracic vertebral segments.
- Anterior thoracic stabilization constructs.
Selection of the appropriate configuration depends on:
- Thoracic anatomy.
- Vertebral body dimensions.
- Fixation level.
- Required plate positioning.
- Screw trajectory.
- Bone quality.
- Construct geometry.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified spine surgeon according to the approved surgical technique and IFU.
Key Benefits
Titanium Material
The supplied catalog specifies:
Material: Titanium
Right-Sided Anatomical Configuration
The implant is specifically designed as a Right Anterior Thoracic Vertebral Body Plate.
Three Length Options
Available configurations include:
13 / 15 / 18 mm
providing several options during implant selection.
Multi-Point Fixation Geometry
The plate incorporates multiple screw fixation interfaces to support a compatible spinal fixation construct.
Contoured Plate Design
The plate geometry is shaped to support its intended thoracic vertebral body application.
Individual Product Identification
Each configuration has its own Cat. No. for:
- Implant identification.
- Surgical set preparation.
- Procurement.
- Inventory management.
GTIN Traceability
Each configuration also carries an individual GTIN No. to support:
- Product traceability.
- Inventory tracking.
- Stock control.
- Supply chain management.
Technical Specifications
| Length | Cat. No. | GTIN No. |
| 13 mm | AMS 508.001.013T | 6221361044661 |
| 15 mm | AMS 508.001.015T | 6221361044678 |
| 18 mm | AMS 508.001.018T | 6221361044685 |
Technical Overview
Product Name: Anterior Thoracic Vertebral Body Plate (Right)
Material: Titanium
Product Type: Right-Sided Anterior Thoracic Vertebral Body Fixation Plate
Product Category: Spinal Internal Fixation Implant
General Cat. No.: AMS 508.001.000
Available Lengths: 13 / 15 / 18 mm
Number of Configurations: 3
Design: Contoured Multi-Point Thoracic Vertebral Body Plate
Fixation Concept: Plate-and-Screw Thoracic Fixation
Anatomical Application: Thoracic Vertebral Body
Side: Right
Identification: Individual Cat. No. and GTIN No. for each configuration
Product Features
- Right-sided Anterior Thoracic Vertebral Body Plate Design.
- Manufactured from Titanium according to the catalog.
- Designed for compatible thoracic spine fixation systems.
- Contoured plate geometry.
- Multiple fixation / screw interfaces.
- Available in 3 configurations.
- Lengths: 13, 15, and 18 mm.
- Supports different thoracic fixation constructs.
- Provides multiple options for preoperative implant selection.
- Supports intraoperative configuration selection according to anatomy.
- Individual Cat. No. for each length.
- Individual GTIN No. for each configuration.
- Supports implant identification, product traceability, procurement, and inventory management.
Reviews
There are no reviews yet.