Female Half Hinges are mechanical connection and articulation components used within Orthopedic External Fixation systems. They are designed to function as part of a Hinge Assembly within the External Fixator Construct, allowing integration with the corresponding hinge component and compatible Connecting Elements according to the fixation system design.
The product incorporates a Female Hinge Geometry with a supporting body and dedicated Connection Hole / Interface designed to form a Mechanical Joint within the Fixator Frame. These components may assist in creating articulated connection points or a Directional Connection within the Construct according to the Surgical Plan and applicable Assembly Instructions.
According to the provided product data, the family is listed under the general reference:
Cat. No.: AMS 602.032
The range is available in four configurations according to the listed number of holes:
1H – 2H – 3H – 4H
This range provides different options during Frame Planning, Component Positioning, and Hinge Assembly.
Each variant carries an individual product code and GTIN Number, supporting Product Identification, Product Traceability, Procurement, Surgical Set Preparation, Inventory Management, and Stock Control.
Product Description
A Female Half Hinge is a Mechanical External Fixation Component representing one half of a Hinge Assembly within an external fixation system.
It functions in combination with:
Female Half Hinge ↔ Compatible Male / Opposing Hinge Component
to create a Mechanical Hinge Connection within the External Fixator Frame.
This type of Hinge Component may be incorporated into a Construct requiring an articulated connection or controlled Frame Geometry according to the fixation system design.
Product Components and Design
- Female Hinge Body
The main body of the component, designed to function as one half of the Mechanical Hinge.
- Connection Hole / Eyelet
The design incorporates a visible primary opening that functions as part of the Hinge Connection or as a Pin / Bolt Interface.
- Female Connection Geometry
The section that identifies the product as a Female Half Hinge, designed to receive or connect with the corresponding component within the Hinge Assembly.
- Support / Base Section
The extended portion of the Hinge Body that provides a Structural Interface with compatible External Fixator components.
- Hole Configurations
The product family is available in:
- 1 Hole
- 2 Holes
- 3 Holes
- 4 Holes
according to the provided table.
Product Use
Female Half Hinges are used within compatible Orthopedic External Fixation systems to create Hinge Assemblies or Mechanical Connections within the Fixator Construct.
Depending on the fixation system design, they may be integrated with:
- Male / Opposing Hinge Components
- Connection Bolts
- Rods
- Connection Plates
- Rings
- Arches
- Clamps
- Other compatible External Fixator Components
Selection of the appropriate configuration depends on:
- Required Hinge Geometry
- Number of Connection Points
- Frame Layout
- Component Positioning
- External Fixator Construct
- Preoperative Planning
- Intraoperative Assembly
The product should only be used in accordance with the applicable IFU and Assembly Instructions of the fixation system.
Key Benefits
Hinge Assembly Integration
Designed to function as part of a Mechanical Hinge Assembly within the External Fixator Construct.
Four Hole Configurations
The product range is available in:
1H | 2H | 3H | 4H
providing multiple options according to the required number of connection points.
Modular External Fixator Compatibility
The Female Half Hinge can be integrated with corresponding hinge components and compatible Connecting Components within the fixation system.
Frame Assembly Flexibility
The different configurations support:
- Component Positioning
- Hinge Placement
- Frame Layout
- Construct Assembly
Clear Product Coding
Each variant carries an individual Cat. No. to facilitate:
- Product Identification
- Surgical Set Preparation
- Procurement
- Inventory Management
GTIN Traceability
An individual GTIN Number for each configuration supports:
- Product Traceability
- Stock Control
- Inventory Tracking
- Supply Chain Management
Technical Specifications
| Holes | Cat. No. | GTIN No. |
| 1 | AMS 602.032.001 | 6221361015456 |
| 2 | AMS 602.032.002 | 6221361015470 |
| 3 | AMS 602.032.003 | 6221361015494 |
| 4 | AMS 602.032.004 | 6221361015517 |
Technical Overview
Product Name: Female Half Hinges
Product Type: External Fixation Female Hinge Component
Product Category: Orthopedic External Fixation Component
General Cat. No.: AMS 602.032
Available Configurations: 1 / 2 / 3 / 4 Holes
Number of Configurations: 4
Design Concept: Female Half Hinge with Connection Interface
Functional Role: Mechanical Hinge / Connection within External Fixator Construct
System Application: Modular External Fixation
Identification: Individual Cat. No. & GTIN No. for each configuration
Product Features
- Female Half Hinge Design.
- Intended for compatible Orthopedic External Fixation systems.
- Functions as part of a Mechanical Hinge Assembly.
- Available in 4 Hole Configurations.
- Available options: 1H, 2H, 3H, and 4H.
- Provides multiple options during Hinge Positioning.
- Supports Frame Assembly and Component Alignment.
- Can be integrated with compatible Opposing Hinge Components and Fasteners.
- Suitable for use within a Modular External Fixation Construct.
- Supports Preoperative Frame Planning.
- Facilitates Intraoperative Hinge Assembly.
- General Cat. No.: AMS 602.032.
- Individual Cat. No. for each configuration.
- Individual GTIN Number for each variant.
- Supports Product Traceability, Procurement, Inventory Management, and Stock Control.Female Half Hinges are mechanical connection and articulation components used within Orthopedic External Fixation systems. They are designed to function as part of a Hinge Assembly within the External Fixator Construct, allowing integration with the corresponding hinge component and compatible Connecting Elements according to the fixation system design.
The product incorporates a Female Hinge Geometry with a supporting body and dedicated Connection Hole / Interface designed to form a Mechanical Joint within the Fixator Frame. These components may assist in creating articulated connection points or a Directional Connection within the Construct according to the Surgical Plan and applicable Assembly Instructions.
According to the provided product data, the family is listed under the general reference:
Cat. No.: AMS 602.032
The range is available in four configurations according to the listed number of holes:
1H – 2H – 3H – 4H
This range provides different options during Frame Planning, Component Positioning, and Hinge Assembly.
Each variant carries an individual product code and GTIN Number, supporting Product Identification, Product Traceability, Procurement, Surgical Set Preparation, Inventory Management, and Stock Control.
Product Description
A Female Half Hinge is a Mechanical External Fixation Component representing one half of a Hinge Assembly within an external fixation system.
It functions in combination with:
Female Half Hinge ↔ Compatible Male / Opposing Hinge Component
to create a Mechanical Hinge Connection within the External Fixator Frame.
This type of Hinge Component may be incorporated into a Construct requiring an articulated connection or controlled Frame Geometry according to the fixation system design.
Product Components and Design
- Female Hinge Body
The main body of the component, designed to function as one half of the Mechanical Hinge.
- Connection Hole / Eyelet
The design incorporates a visible primary opening that functions as part of the Hinge Connection or as a Pin / Bolt Interface.
- Female Connection Geometry
The section that identifies the product as a Female Half Hinge, designed to receive or connect with the corresponding component within the Hinge Assembly.
- Support / Base Section
The extended portion of the Hinge Body that provides a Structural Interface with compatible External Fixator components.
- Hole Configurations
The product family is available in:
- 1 Hole
- 2 Holes
- 3 Holes
- 4 Holes
according to the provided table.
Product Use
Female Half Hinges are used within compatible Orthopedic External Fixation systems to create Hinge Assemblies or Mechanical Connections within the Fixator Construct.
Depending on the fixation system design, they may be integrated with:
- Male / Opposing Hinge Components
- Connection Bolts
- Rods
- Connection Plates
- Rings
- Arches
- Clamps
- Other compatible External Fixator Components
Selection of the appropriate configuration depends on:
- Required Hinge Geometry
- Number of Connection Points
- Frame Layout
- Component Positioning
- External Fixator Construct
- Preoperative Planning
- Intraoperative Assembly
The product should only be used in accordance with the applicable IFU and Assembly Instructions of the fixation system.
Key Benefits
Hinge Assembly Integration
Designed to function as part of a Mechanical Hinge Assembly within the External Fixator Construct.
Four Hole Configurations
The product range is available in:
1H | 2H | 3H | 4H
providing multiple options according to the required number of connection points.
Modular External Fixator Compatibility
The Female Half Hinge can be integrated with corresponding hinge components and compatible Connecting Components within the fixation system.
Frame Assembly Flexibility
The different configurations support:
- Component Positioning
- Hinge Placement
- Frame Layout
- Construct Assembly
Clear Product Coding
Each variant carries an individual Cat. No. to facilitate:
- Product Identification
- Surgical Set Preparation
- Procurement
- Inventory Management
GTIN Traceability
An individual GTIN Number for each configuration supports:
- Product Traceability
- Stock Control
- Inventory Tracking
- Supply Chain Management
Technical Specifications
Holes Cat. No. GTIN No. 1 AMS 602.032.001 6221361015456 2 AMS 602.032.002 6221361015470 3 AMS 602.032.003 6221361015494 4 AMS 602.032.004 6221361015517 Technical Overview
Product Name: Female Half Hinges
Product Type: External Fixation Female Hinge Component
Product Category: Orthopedic External Fixation Component
General Cat. No.: AMS 602.032
Available Configurations: 1 / 2 / 3 / 4 Holes
Number of Configurations: 4
Design Concept: Female Half Hinge with Connection Interface
Functional Role: Mechanical Hinge / Connection within External Fixator Construct
System Application: Modular External Fixation
Identification: Individual Cat. No. & GTIN No. for each configuration
Product Features
- Female Half Hinge Design.
- Intended for compatible Orthopedic External Fixation systems.
- Functions as part of a Mechanical Hinge Assembly.
- Available in 4 Hole Configurations.
- Available options: 1H, 2H, 3H, and 4H.
- Provides multiple options during Hinge Positioning.
- Supports Frame Assembly and Component Alignment.
- Can be integrated with compatible Opposing Hinge Components and Fasteners.
- Suitable for use within a Modular External Fixation Construct.
- Supports Preoperative Frame Planning.
- Facilitates Intraoperative Hinge Assembly.
- General Cat. No.: AMS 602.032.
- Individual Cat. No. for each configuration.
- Individual GTIN Number for each variant.
- Supports Product Traceability, Procurement, Inventory Management, and Stock Control.
Reviews
There are no reviews yet.