Product Explanation
The Locking Head Cancellous Bone Screw, Self Tapping Ø 5.0 mm – Fully Threaded is an orthopedic fixation screw intended to form part of a compatible locking plate-and-screw fixation construct.
A simplified fixation concept can be represented as:
Prepared Bone → Compatible Locking Plate → 5.0 mm Fully Threaded Cancellous Locking Screw → Locked Fixation Construct
The product combines five principal supplied characteristics:
Locking Head
Cancellous Thread
Self Tapping
Fully Threaded
Ø 5.0 mm nominal diameter
The locking-head configuration indicates compatibility with a manufacturer-defined locking plate interface.
The cancellous designation identifies the screw as belonging to a cancellous-thread screw family.
The fully threaded configuration indicates that the bone-engaging external thread extends along essentially the working shaft rather than being limited to only a distal section.
The exact thread geometry and locking-head interface should be confirmed from the manufacturer’s engineering drawings.
Product Components and Design
- Locking Head
The product is specifically identified as a:
Locking Head Cancellous Bone Screw
The proximal head is intended to interface with a compatible locking plate or fixation component.
The supplied product data does not define:
- Locking-head thread pitch.
- Locking-head diameter.
- Locking interface geometry.
- Fixed-angle characteristics.
- Variable-angle capability.
- Compatible locking plate-hole geometry.
These specifications should be confirmed from official technical documentation.
- Ø 5.0 mm Screw Body
The supplied product title specifies:
Ø 5.0 mm
as the nominal screw diameter.
The source does not separately specify:
- Major thread diameter.
- Minor / core diameter.
- Thread depth.
- Cancellous thread pitch.
- Thread lead.
- Dimensional tolerances.
These values should be obtained from the manufacturer’s dimensional drawing.
- Cancellous Thread Configuration
The product is specifically identified as a:
Cancellous Bone Screw
This distinguishes it from cortical screw configurations.
The exact characteristics of the cancellous thread—including pitch, depth, thread angle, core diameter, and flank profile—are not supplied in the image.
Therefore, the technically safe catalog wording is:
Thread Type: Cancellous
without adding unsupported dimensional specifications.
- Fully Threaded Configuration
The product designation states:
Fully Thread
which is more appropriately standardized in technical English as:
Fully Threaded
The supplied image visually shows external threading extending along essentially the full screw shaft.
The exact threaded length for each screw size is not provided and should be confirmed from the manufacturer’s drawings.
- Self-Tapping Design
The product is specifically identified as:
Self Tapping
indicating a manufacturer-defined self-tapping tip / thread-entry configuration.
The exact:
- Cutting flute geometry.
- Tip design.
- Thread-start geometry.
- Drilling requirements.
- Need for pre-tapping in specific circumstances.
are not specified in the supplied image.
- Screw Tip
The distal end incorporates a defined tip associated with the product’s Self Tapping designation.
The exact tip angle, cutting features, and insertion characteristics should be confirmed from official technical documentation rather than estimated from the image.
- Drive Interface
The supplied image shows an insertion interface within the screw head.
However, the exact drive type is not specified.
Therefore, the product sheet should not identify the interface as:
Hex / Torx / Star / Stardrive / other
without manufacturer confirmation.
Length Configurations
According to the supplied product information:
Length: 25–100 mm (5 mm Variation)
The available lengths are therefore:
| No. | Length |
| 1 | 25 mm |
| 2 | 30 mm |
| 3 | 35 mm |
| 4 | 40 mm |
| 5 | 45 mm |
| 6 | 50 mm |
| 7 | 55 mm |
| 8 | 60 mm |
| 9 | 65 mm |
| 10 | 70 mm |
| 11 | 75 mm |
| 12 | 80 mm |
| 13 | 85 mm |
| 14 | 90 mm |
| 15 | 95 mm |
| 16 | 100 mm |
Therefore:
Total Length Configurations: 16
Material Options
According to the supplied product data, the screw is available in:
SS316L
and
Titanium
The exact Titanium alloy or grade is not specified and should be confirmed from the manufacturer’s official material documentation.
Intended Use
The Locking Head Cancellous Bone Screw, Self Tapping Ø 5.0 mm – Fully Threaded is designed for use as part of a compatible locking orthopedic fixation system according to the approved indications, surgical technique, and Instructions for Use.
Potential applications may involve fixation through compatible locking plate holes where a 5.0 mm fully threaded cancellous locking head screw is specified.
The exact approved anatomical indications and compatible implant systems are not stated in the supplied image.
Screw selection may depend on factors including:
- Anatomical location.
- Bone dimensions.
- Bone quality.
- Requirement for cancellous fixation.
- Required screw diameter.
- Required screw length.
- Requirement for a fully threaded configuration.
- Compatible locking plate.
- Compatible plate-hole geometry.
- Required fixation construct.
- Screw trajectory.
- Compatible drilling instrumentation.
- Compatible depth gauge.
- Compatible screwdriver.
- Preoperative planning.
- Intraoperative measurement.
The screw should be selected and implanted by a qualified orthopedic surgeon in accordance with the approved surgical technique and Instructions for Use.
Key Benefits
Locking Head Configuration
The product is specifically identified as a:
Locking Head Bone Screw
indicating compatibility with a manufacturer-defined locking fixation interface.
The exact locking mechanism should be confirmed from official system documentation.
Cancellous Thread Family
The screw is specifically identified as a:
Cancellous Bone Screw
distinguishing it from cortical screw configurations.
The exact cancellous thread geometry should be confirmed from technical drawings.
Fully Threaded Design
The product is identified as:
Fully Threaded
providing external bone-engaging threads along the working screw shaft.
The exact threaded length should be confirmed for each product size.
Self-Tapping Design
The product is specifically identified as:
Self Tapping
providing a manufacturer-defined self-tapping tip / thread-entry configuration.
Ø 5.0 mm Nominal Diameter
The screw provides a nominal:
5.0 mm diameter
within the compatible fixation system.
25–100 mm Length Range
The product is available from:
25 mm to 100 mm
covering a broad range of screw lengths.
5 mm Length Increments
The entire supplied range uses:
5 mm increments
providing standardized length progression across the product family.
16 Length Configurations
The complete available range is:
25 / 30 / 35 / 40 / 45 / 50 / 55 / 60 / 65 / 70 / 75 / 80 / 85 / 90 / 95 / 100 mm
providing:
16 individual length options
Two Material Options
According to the supplied product information, the screw is available in:
SS316L
and
Titanium
Multiple Product Variants
Based strictly on the supplied product information, the family includes:
- 1 nominal diameter: Ø 5.0 mm
- 1 cancellous thread family
- 1 fully threaded configuration
- 1 locking-head configuration
- 1 self-tapping configuration
- 16 length options
- 2 material options: SS316L / Titanium
If every listed length is available in both materials, this could theoretically represent:
16 × 2 = up to 32 basic length × material configurations
The exact commercial product matrix should be confirmed from the official Cat. No. / GTIN table.
Technical Specifications
| Specification | Product Data |
| Product Name | Locking Head Cancellous Bone Screw, Self Tapping Ø 5.0 mm – Fully Threaded |
| Product Type | Locking Head Cancellous Bone Screw |
| Head Type | Locking Head |
| Bone Thread Type | Cancellous |
| Thread Configuration | Fully Threaded |
| Design | Self Tapping |
| Nominal Diameter | Ø 5.0 mm |
| Length Range | 25–100 mm |
| Length Increment | 5 mm |
| Available Lengths | 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 mm |
| Number of Length Options | 16 |
| Materials | SS316L, Titanium |
| Potential Basic Configurations | Up to 32, subject to catalog confirmation |
| Cancellous Thread Pitch | Not provided |
| Thread Depth | Not provided |
| Core Diameter | Not provided |
| Threaded Length | Not provided |
| Locking Head Geometry | Not provided |
| Head Diameter | Not provided |
| Head Height | Not provided |
| Drive Interface | Not provided |
| Tip Geometry | Self-tapping; exact geometry not provided |
| Compatible Locking Plate | Not provided |
| Compatible Plate Hole | Not provided |
| Compatible Drill Size | Not provided |
| Compatible Tap | Not provided |
| Compatible Screwdriver | Not provided |
| Titanium Grade | Not provided |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
Technical Overview
Product Name: Locking Head Cancellous Bone Screw, Self Tapping Ø 5.0 mm – Fully Threaded
Product Type: Orthopedic Locking Head Cancellous Bone Screw
Head Configuration: Locking Head
Thread Family: Cancellous
Thread Configuration: Fully Threaded
Screw Design: Self Tapping
Nominal Diameter: Ø 5.0 mm
Length Range: 25–100 mm
Length Increment: 5 mm
Total Length Options: 16
Material Options: SS316L and Titanium
Fixation Concept: Locked plate-and-screw fixation using a compatible orthopedic locking system
Cancellous Thread Geometry: Not supplied
Locking Head Geometry: Not supplied
Head / Drive Geometry: Not supplied
Compatible Implant System: Not supplied
Specific Titanium Grade: Not supplied
Compatible Instrumentation: Not supplied
Cat. No.: Not supplied
GTIN No.: Not supplied
Product Features
- Orthopedic locking fixation screw.
- Specifically identified as a Locking Head Cancellous Bone Screw.
- Specifically identified as Self Tapping.
- Nominal diameter of Ø 5.0 mm.
- Cancellous thread configuration.
- Fully threaded screw design.
- Available from 25 mm to 100 mm.
- Uses 5 mm length increments.
- Provides 16 length configurations.
- Available in SS316L.
- Available in Titanium.
- Features a threaded bone-engaging shaft.
- Threading extends along essentially the complete working shaft according to the fully threaded designation.
- Features a manufacturer-defined locking head.
- Features a self-tapping distal configuration.
- Includes a proximal insertion interface.
- Intended for use with a compatible locking fixation system.
- Exact cancellous thread pitch should be confirmed from technical drawings.
- Exact thread depth should be confirmed.
- Exact core diameter should be confirmed.
- Exact locking-head interface geometry should be confirmed.
- Exact head dimensions should be confirmed.
- Exact drive interface should be confirmed.
- Exact drilling / tapping requirements should be confirmed from the surgical technique.
- Exact compatible locking plate and plate-hole geometry should be confirmed from official system documentation.
- Exact Titanium alloy should be confirmed.
- Individual Cat. No. and GTIN No. should be added when the official product matrix is available.
- Approved indications, contraindications, and insertion technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.