Product Explanation
The Locking Redial Head Rim Plate, 2.4 mm is an orthopedic fixation plate intended to form part of a compatible internal fixation construct in the radial-head region.
A simplified fixation concept can be represented as:
Radial Head / Proximal Radius → Rim Locking Plate → Compatible Fixation Screws → Internal Fixation Construct
The plate is selected and positioned according to the anatomical side, fracture configuration, bone anatomy, required fixation construct, surgical plan, approved surgical technique, and Instructions for Use.
According to the supplied product information, the product is available in:
Left / Right
configurations.
The plate family includes:
2 / 3 / 4 Head Holes
and:
3 / 5 Shaft Holes
providing multiple plate configurations for implant selection.
The exact pairing of the listed head-hole and shaft-hole configurations should be confirmed from the official product catalog.
Product Components and Design
- Rim Plate Body
The implant consists of a metallic fixation plate with a broadened head section and an elongated shaft.
The product is specifically identified as a:
Head Rim Plate
according to the supplied product name.
The plate geometry shown in the image includes a contoured upper section and a narrow elongated shaft.
The exact anatomical contour, plate curvature, dimensions, and relationship to the radial head should be confirmed from the manufacturer’s technical drawings.
- Head / Rim Section
The broadened upper section of the plate contains multiple fixation openings.
According to the supplied product information, the available head configurations are:
2 Head Holes
3 Head Holes
4 Head Holes
These options provide alternative fixation layouts within the head section of the plate.
The exact screw trajectory, compatible screw type, screw diameter, and locking interface associated with the individual head holes are not specified in the supplied image.
- Shaft Section
The elongated shaft is available with:
3 Shaft Holes
or
5 Shaft Holes
according to the supplied product data.
These options provide alternative shaft configurations within the plate family.
The exact plate lengths corresponding to the 3-hole and 5-hole versions are not provided.
- Multiple Fixation Opening Geometries
The supplied product image visually shows different opening geometries throughout the plate.
These include:
- Circular openings.
- Elongated openings.
- Openings within the broadened head section.
- Multiple openings distributed along the shaft.
The exact technical role of the individual openings—such as locking fixation, conventional fixation, compression, positioning, or adjustment—is not defined in the supplied information and should be confirmed from the approved surgical technique.
- Left and Right Configurations
The product is available in:
Left / Right
alignment options.
This supports side-specific implant selection according to the anatomy being treated.
The exact geometric differences between the Left and Right versions should be confirmed from the official product drawings.
- Material Options
According to the supplied product data, the plate is available in:
SS316L
and
Titanium
The exact Titanium alloy or grade is not stated in the supplied image and should be confirmed from the manufacturer’s material specification.
Intended Use
The Locking Redial Head Rim Plate, 2.4 mm is designed for use as part of a compatible orthopedic fixation system involving the radial-head region, according to the approved indications, surgical technique, and Instructions for Use.
Potential applications may include internal fixation in the radial-head or proximal-radius region where a rim plate configuration is included within the manufacturer’s approved indications.
The exact fracture patterns, classifications, anatomical indications, surgical approach, contraindications, screw configuration, and patient selection criteria should be confirmed from the official product documentation.
Plate selection may depend on factors including:
- Anatomical side.
- Radial-head anatomy.
- Fracture location and configuration.
- Required fixation construct.
- Required head-hole configuration.
- Required shaft-hole configuration.
- Bone dimensions.
- Bone quality.
- Plate geometry requirement.
- Compatible screw selection.
- Compatible instrumentation.
- Surgical approach.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified orthopedic surgeon in accordance with the approved surgical technique and Instructions for Use.
Key Benefits
Rim Plate Configuration
The product is specifically identified as a:
Head Rim Plate
providing a distinct plate configuration within a compatible radial-head fixation system.
The exact biomechanical role and approved clinical indications of the rim configuration should be confirmed from the manufacturer’s technical documentation.
Left and Right Anatomical Options
The plate is available in:
Left / Right
configurations, supporting side-specific implant selection.
Three Head-Hole Options
The product family includes:
2 Head Holes
3 Head Holes
4 Head Holes
providing multiple head-section configurations.
Two Shaft-Hole Options
The plate family is available with:
3 Shaft Holes
and
5 Shaft Holes
providing two alternative shaft configurations.
2.4 mm Fixation System
The product is identified as:
Locking Redial Head Rim Plate, 2.4 mm
indicating its association with a compatible 2.4 mm orthopedic fixation system.
The exact screw size and screw type assigned to individual plate openings should be confirmed from the manufacturer’s technical documentation.
Two Material Options
The plate is available in:
SS316L
and
Titanium
according to the supplied product data.
Multiple Product Variants
Based strictly on the supplied image, the product family includes:
- 2 alignment options: Left / Right
- 3 head-hole options: 2 / 3 / 4
- 2 shaft-hole options: 3 / 5
- 2 material options: SS316L / Titanium
These parameters indicate a multi-configuration implant family.
If all listed options could be freely combined, this would theoretically provide up to 24 combinations.
However, the supplied image does not confirm that every head-hole, shaft-hole, alignment, and material option exists in every possible combination. The exact number of catalog configurations should therefore be confirmed from the official Cat. No. table.
Technical Specifications
| Specification | Product Data |
| Product Name | Locking Redial Head Rim Plate, 2.4 mm |
| Product Category | Trauma |
| Product Type | Locking Orthopedic Fixation Plate |
| Plate Configuration | Head Rim Plate |
| Anatomical Region | Radial Head / Proximal Radius |
| System Size | 2.4 mm |
| Alignment | Left, Right |
| Head Hole Options | 2, 3, 4 |
| Shaft Hole Options | 3, 5 |
| Materials | SS316L, Titanium |
| Potential Maximum Combinations | Up to 24, subject to catalog confirmation |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
| Plate Length | Not provided |
| Plate Width | Not provided |
| Plate Thickness | Not provided |
| Head/Rim Dimensions | Not provided |
| Compatible Screw Details | Not provided |
| Screw Trajectories | Not provided |
| Titanium Grade | Not provided |
| Compatible Instrumentation | Not provided |
Technical Overview
Product Name: Locking Redial Head Rim Plate, 2.4 mm
Product Category: Trauma
Product Type: Locking Orthopedic Fixation Plate
Plate Type: Head Rim Plate
Anatomical Region: Radial Head / Proximal Radius
System: 2.4 mm
Alignment Options: Left and Right
Head Hole Options: 2, 3, and 4
Shaft Hole Options: 3 and 5
Material Options: SS316L and Titanium
Plate Geometry: Contoured head / rim section with elongated shaft
Fixation Concept: Plate-and-screw internal fixation using a compatible orthopedic fixation system
Side-Specific Design: Yes — Left / Right
Cat. No.: Not supplied
GTIN No.: Not supplied
Specific Titanium Grade: Not supplied
Plate Dimensions: Not supplied
Specific Screw Compatibility: Not supplied
Product Features
- Locking orthopedic fixation plate design.
- Identified as a Head Rim Plate.
- Associated with a 2.4 mm fixation system according to the product name.
- Available in Left and Right configurations.
- Available with 2 head holes.
- Available with 3 head holes.
- Available with 4 head holes.
- Available with 3 shaft holes.
- Available with 5 shaft holes.
- Available in SS316L.
- Available in Titanium.
- Features a broadened contoured head / rim section.
- Features an elongated shaft.
- Includes multiple fixation openings.
- Includes circular openings visible in the supplied product image.
- Includes elongated openings visible in the supplied product image.
- Supports side-specific implant selection.
- Supports multiple head-hole configurations.
- Supports multiple shaft-hole configurations.
- Provides multiple potential implant variants.
- Exact head-hole and shaft-hole combinations should be confirmed from the official catalog.
- Exact compatible screw types and diameters should be confirmed from the manufacturer’s technical documentation.
- Exact screw trajectories should be confirmed from the approved technical drawings.
- Exact plate dimensions and thickness should be confirmed from the manufacturer’s product specifications.
- Individual Cat. No. and GTIN No. should be added when the official product table is available.
- Approved indications, contraindications, and surgical technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.