Product Explanation
The Locking Superior Anterior Clavicle Plate, 3.5 mm is an orthopedic fixation plate intended to form part of a compatible internal fixation construct involving the clavicle.
A simplified fixation concept can be represented as:
Clavicle → Superior-Anterior Locking Plate → Compatible Fixation Screws → Internal Fixation Construct
The product is specifically identified as a:
Superior Anterior Clavicle Plate
according to the supplied product designation.
The plate is selected and positioned according to the anatomical side, clavicle anatomy, fracture configuration, required fixation construct, plate length, surgical plan, approved surgical technique, and Instructions for Use.
According to the supplied product information, the plate is available in:
Left / Right
configurations.
The shaft is available with:
4 / 5 / 6 / 7 / 8 Shaft Holes
providing multiple plate variants within the same product family.
Product Components and Design
- Clavicle Plate Body
The implant consists of an elongated metallic fixation plate with a contoured longitudinal profile.
The supplied image visually shows a curved plate body rather than a completely straight geometry.
The exact anatomical contour, superior-anterior profile, length, width, thickness, and plate-to-bone relationship should be confirmed from the manufacturer’s technical drawings.
- Superior-Anterior Configuration
The product is specifically designated:
Superior Anterior
within the supplied product name.
This indicates a distinct plate configuration within the clavicle fixation family.
The exact anatomical orientation, contour, and positioning represented by the manufacturer’s term Superior Anterior should be confirmed from the approved surgical technique and technical documentation.
- Shaft Section
According to the supplied product information, the plate is available with:
4 Shaft Holes
5 Shaft Holes
6 Shaft Holes
7 Shaft Holes
8 Shaft Holes
This provides five listed shaft configurations.
The exact physical plate length corresponding to each shaft-hole configuration is not provided in the supplied image.
- Head-Hole Configuration
The supplied product data states:
Head Holes: –
Therefore, no numerical head-hole count is specified.
The supplied image shows multiple fixation openings distributed along the plate, but no separate anatomical head section is formally defined in the provided data.
The exact classification of these openings should therefore be confirmed from the manufacturer’s technical documentation.
- Multiple Fixation Opening Geometries
The supplied product image visually shows multiple fixation openings distributed along the plate body.
These include:
- Circular openings.
- Elongated / contoured openings.
- Multiple longitudinal fixation positions.
- Openings located along the curved plate profile.
The exact technical function of each opening—such as locking fixation, conventional fixation, compression, positioning, or adjustment—is not specified in the supplied product information and should be confirmed from the approved surgical technique.
- Contoured Plate Geometry
The plate visibly incorporates multiple changes in direction along its longitudinal profile.
This contour distinguishes the plate from a simple straight fixation plate.
The exact curvature, bend angles, torsion, offsets, and anatomical contour are not provided in the supplied image and should be confirmed from the manufacturer’s engineering drawings.
- Left and Right Configurations
According to the supplied product information, the plate is available in:
Left / Right
versions.
This supports side-specific implant selection according to the clavicle being treated.
The exact geometric differences between the Left and Right versions should be confirmed from the manufacturer’s technical drawings.
- Material Options
According to the supplied product data, the plate is available in:
SS316L
and
Titanium
The specific Titanium alloy or grade is not provided in the supplied image and should be confirmed from the manufacturer’s official material specification.
Intended Use
The Locking Superior Anterior Clavicle Plate, 3.5 mm is designed for use as part of a compatible orthopedic fixation system involving the clavicle, according to the approved indications, surgical technique, and Instructions for Use.
Potential applications may involve internal fixation of the clavicle where this superior-anterior plate configuration is included within the manufacturer’s approved indications.
The exact fracture locations, fracture classifications, anatomical indications, surgical approach, fixation strategy, contraindications, and patient-selection criteria should be confirmed from the official product documentation.
Plate selection may depend on factors including:
- Anatomical side.
- Clavicle anatomy.
- Fracture location and configuration.
- Required superior-anterior plate profile.
- Required fixation construct.
- Required shaft-hole configuration.
- Required plate length.
- Bone dimensions.
- Bone quality.
- Compatible screw selection.
- Compatible instrumentation.
- Surgical approach.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified orthopedic surgeon in accordance with the approved surgical technique and Instructions for Use.
Key Benefits
Superior-Anterior Clavicle Configuration
The product is specifically identified as a:
Locking Superior Anterior Clavicle Plate
providing a distinct contoured configuration within a compatible clavicle fixation system.
The exact clinical and biomechanical role of this plate orientation should be confirmed from the manufacturer’s documentation.
Left and Right Anatomical Options
The plate is available in:
Left / Right
configurations, supporting side-specific implant selection.
Five Shaft-Hole Configurations
The plate family includes:
4 / 5 / 6 / 7 / 8 Shaft Holes
providing five plate configurations.
This supports selection among different plate variants according to the required fixation construct and surgical plan.
3.5 mm Fixation System
The product is identified as:
Locking Superior Anterior Clavicle Plate, 3.5 mm
indicating its association with a compatible 3.5 mm orthopedic fixation system.
The exact compatible screw type and whether all plate openings accept the same screw specification should be confirmed from the manufacturer’s technical documentation.
Two Material Options
According to the supplied product information, the plate is available in:
SS316L
and
Titanium
Multiple Plate-Length Configurations
The available shaft-hole options:
4 → 5 → 6 → 7 → 8
indicate several plate variants within the product family.
The corresponding physical plate lengths are not supplied and should be confirmed from the manufacturer’s dimensional table.
Multiple Product Variants
Based strictly on the supplied product information, the family includes:
- 2 alignment options: Left / Right
- No numerical head-hole configuration specified
- 5 shaft-hole options: 4 / 5 / 6 / 7 / 8
- 2 material options: SS316L / Titanium
If every shaft-hole configuration is available in both alignments and both materials, this could represent up to 20 basic alignment × shaft × material combinations.
However, the supplied image does not provide the complete commercial configuration matrix. The exact number of available variants should therefore be confirmed from the official Cat. No. table.
Technical Specifications
| Specification | Product Data |
| Product Name | Locking Superior Anterior Clavicle Plate, 3.5 mm |
| Product Category | Trauma – Clavicle |
| Product Type | Locking Orthopedic Fixation Plate |
| Plate Configuration | Superior Anterior |
| Anatomical Region | Clavicle |
| System Size | 3.5 mm |
| Alignment | Left, Right |
| Head Holes | Not specified |
| Shaft Hole Options | 4, 5, 6, 7, 8 |
| Materials | SS316L, Titanium |
| Potential Basic Configurations | Up to 20, subject to catalog confirmation |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
| Plate Lengths | Not provided |
| Plate Width | Not provided |
| Plate Thickness | Not provided |
| Superior-Anterior Contour | Not provided |
| Bend / Torsion Angles | Not provided |
| Compatible Screw Details | Not provided |
| Screw Trajectories | Not provided |
| Titanium Grade | Not provided |
| Compatible Instrumentation | Not provided |
Technical Overview
Product Name: Locking Superior Anterior Clavicle Plate, 3.5 mm
Product Category: Trauma – Clavicle
Product Type: Locking Orthopedic Fixation Plate
Plate Type: Superior Anterior Clavicle Plate
Anatomical Region: Clavicle
System: 3.5 mm
Alignment Options: Left and Right
Head Holes: Not specified
Shaft Hole Options: 4, 5, 6, 7, and 8
Material Options: SS316L and Titanium
Plate Geometry: Elongated anatomically contoured clavicle plate
Fixation Concept: Plate-and-screw internal fixation using a compatible orthopedic fixation system
Side-Specific Design: Yes — Left / Right
Configuration: Superior Anterior
Cat. No.: Not supplied
GTIN No.: Not supplied
Plate Lengths: Not supplied
Plate Thickness: Not supplied
Specific Titanium Grade: Not supplied
Specific Screw Compatibility: Not supplied
Product Features
- Locking orthopedic fixation plate design.
- Specifically identified as a Superior Anterior Clavicle Plate.
- Included within the Trauma – Clavicle product family.
- Associated with a 3.5 mm fixation system.
- Available in Left and Right configurations.
- No numerical head-hole count is specified in the supplied product data.
- Available with 4 shaft holes.
- Available with 5 shaft holes.
- Available with 6 shaft holes.
- Available with 7 shaft holes.
- Available with 8 shaft holes.
- Available in SS316L.
- Available in Titanium.
- Features an elongated contoured plate body.
- Features a curved superior-anterior profile.
- Includes multiple visible fixation openings.
- Includes circular openings visible in the supplied image.
- Includes elongated / contoured openings visible in the supplied image.
- Supports side-specific implant selection.
- Supports five shaft-hole configurations.
- Supports multiple potential plate-length variants.
- Exact superior-anterior contour and anatomical positioning should be confirmed from official technical documentation.
- Exact compatible screw types and diameters should be confirmed from the manufacturer’s system documentation.
- Exact screw trajectories and locking characteristics should be confirmed from the approved technical drawings.
- Exact plate lengths, curvature, width, thickness, and torsion should be confirmed from the manufacturer’s dimensional specifications.
- Individual Cat. No. and GTIN No. should be added when the official product table is available.
- Approved indications, contraindications, and surgical technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.