Product Explanation
The Locking T Oblique Plate, 3.5 mm is an orthopedic fixation plate intended to form part of a compatible internal fixation construct.
A simplified fixation concept can be represented as:
Radius / Ulna → T-Oblique Locking Plate → Compatible Fixation Screws → Internal Fixation Construct
The product is specifically identified as a:
T Oblique Plate
according to the supplied product designation.
The plate combines an elongated shaft with an obliquely oriented transverse head region.
According to the supplied product information, the plate is available in:
Left / Right
configurations.
The product family includes:
3 / 4 / 5 / 6 / 8 Shaft Holes
providing multiple plate variants.
The exact anatomical location within the radius or ulna is not further specified in the supplied product image.
Product Components and Design
- T-Oblique Plate Body
The implant consists of a metallic fixation plate with a widened transverse head and an elongated shaft.
The head is positioned obliquely relative to the longitudinal shaft, creating the characteristic:
T-Oblique configuration
shown in the supplied image.
The exact oblique angle, anatomical contour, plate curvature, dimensions, and plate-to-bone relationship should be confirmed from the manufacturer’s technical drawings.
- Oblique Head Section
The widened plate head visually contains multiple fixation openings.
However, the supplied product table states:
Head Holes: –
Therefore, no official numerical head-hole specification is provided.
The exact number, classification, compatible screw type, locking interface, and trajectory of the visible head openings should be confirmed from the official technical documentation rather than inferred solely from the image.
- Shaft Section
The elongated shaft is available with:
3 Shaft Holes
4 Shaft Holes
5 Shaft Holes
6 Shaft Holes
8 Shaft Holes
This provides five shaft configurations within the product family.
The exact physical plate length corresponding to each shaft-hole configuration is not supplied.
- Multiple Fixation Opening Geometries
The supplied product image visually shows several opening geometries throughout the plate.
These include:
- Circular openings within the oblique head section.
- Circular shaft openings.
- Elongated / contoured shaft openings.
- Multiple fixation openings distributed along the plate body.
The exact technical function of each opening—such as locking fixation, conventional fixation, compression, positioning, or adjustment—is not specified in the supplied image and should be confirmed from the approved surgical technique.
- Left and Right Configurations
According to the supplied product information, the plate is available in:
Left / Right
alignment options.
This indicates side-specific configurations within the product family.
The exact geometric differences between the Left and Right versions should be confirmed from the manufacturer’s engineering drawings.
- T-Oblique Geometry
The product designation specifically identifies the plate as:
T Oblique
rather than a straight T plate.
This indicates a distinct geometric relationship between the transverse plate head and the longitudinal shaft.
The exact angle and anatomical purpose of this oblique orientation are not provided in the supplied image.
- Material Options
According to the supplied product data, the plate is available in:
SS316L
and
Titanium
The exact Titanium alloy or grade is not specified in the supplied image and should be confirmed from the manufacturer’s material specification.
Intended Use
The Locking T Oblique Plate, 3.5 mm is designed for use as part of a compatible orthopedic fixation system within the radius/ulna region, according to the approved indications, surgical technique, and Instructions for Use.
The supplied category identifies the product under:
Trauma – Radius / Ulna
Potential applications may involve internal fixation within the radius or ulna where this T-Oblique plate configuration is included within the manufacturer’s approved indications.
The exact bone, anatomical segment, fracture types, fracture classifications, surgical approach, fixation strategy, contraindications, and patient-selection criteria should be confirmed from the official product documentation.
Plate selection may depend on factors including:
- Radius or ulna anatomy.
- Anatomical side.
- Fracture location and configuration.
- Required T-Oblique plate geometry.
- Required fixation construct.
- Required shaft-hole configuration.
- Required plate length.
- Bone dimensions.
- Bone quality.
- Compatible screw selection.
- Screw trajectory requirements.
- Compatible instrumentation.
- Surgical approach.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified orthopedic surgeon in accordance with the approved surgical technique and Instructions for Use.
Key Benefits
T-Oblique Plate Configuration
The product is specifically identified as a:
Locking T Oblique Plate
providing a distinct oblique T-shaped geometry within a compatible orthopedic fixation system.
The exact anatomical and biomechanical role of this configuration should be confirmed from the manufacturer’s documentation.
Left and Right Anatomical Options
The plate is available in:
Left / Right
configurations, supporting side-specific implant selection.
Five Shaft-Hole Configurations
The product family includes:
3 / 4 / 5 / 6 / 8 Shaft Holes
providing five different plate configurations.
This supports selection among different plate variants according to fixation requirements and surgical planning.
3.5 mm Fixation System
The product is identified as:
Locking T Oblique Plate, 3.5 mm
indicating its association with a compatible 3.5 mm orthopedic fixation system.
The exact compatible screw type, locking screw specification, and hole-specific screw assignment should be confirmed from the manufacturer’s system documentation.
Two Material Options
According to the supplied product information, the plate is available in:
SS316L
and
Titanium
Radius / Ulna Product Category
The supplied image places the product within:
Trauma – Radius / Ulna
indicating its inclusion in the manufacturer’s forearm fixation portfolio.
The exact anatomical site should still be confirmed from the official product documentation.
Multiple Product Variants
Based strictly on the supplied product information, the family includes:
- 2 alignment options: Left / Right
- No numerical head-hole configuration specified
- 5 shaft-hole options: 3 / 4 / 5 / 6 / 8
- 2 material options: SS316L / Titanium
If every shaft-hole option is available in both alignments and both materials, this could represent up to 20 basic alignment × shaft × material combinations.
However, the supplied image does not provide the full commercial configuration matrix. The exact number of variants should therefore be confirmed from the official Cat. No. table.
Technical Specifications
| Specification | Product Data |
| Product Name | Locking T Oblique Plate, 3.5 mm |
| Product Category | Trauma – Radius / Ulna |
| Product Type | Locking Orthopedic Fixation Plate |
| Plate Configuration | T-Oblique |
| Anatomical Region | Radius / Ulna category; exact site not specified |
| System Size | 3.5 mm |
| Alignment | Left, Right |
| Head Holes | Not specified |
| Shaft Hole Options | 3, 4, 5, 6, 8 |
| Materials | SS316L, Titanium |
| Potential Basic Configurations | Up to 20, subject to catalog confirmation |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
| Plate Lengths | Not provided |
| Head Width | Not provided |
| Plate Thickness | Not provided |
| Oblique Angle | Not provided |
| Compatible Screw Details | Not provided |
| Screw Trajectories | Not provided |
| Titanium Grade | Not provided |
| Compatible Instrumentation | Not provided |
Technical Overview
Product Name: Locking T Oblique Plate, 3.5 mm
Product Category: Trauma – Radius / Ulna
Product Type: Locking Orthopedic Fixation Plate
Plate Type: T-Oblique
Anatomical Region: Radius / Ulna category
System: 3.5 mm
Alignment Options: Left and Right
Head Holes: Not specified
Shaft Hole Options: 3, 4, 5, 6, and 8
Material Options: SS316L and Titanium
Plate Geometry: Obliquely oriented transverse head with elongated shaft
Fixation Concept: Plate-and-screw internal fixation using a compatible orthopedic fixation system
Side-Specific Design: Yes — Left / Right
Cat. No.: Not supplied
GTIN No.: Not supplied
Plate Lengths: Not supplied
Oblique Angle: Not supplied
Specific Titanium Grade: Not supplied
Specific Screw Compatibility: Not supplied
Product Features
- Locking orthopedic fixation plate design.
- Specifically identified as a T Oblique Plate.
- Included in the Trauma – Radius / Ulna product category.
- Associated with a 3.5 mm fixation system.
- Available in Left and Right configurations.
- No numerical head-hole count is specified in the supplied product data.
- Available with 3 shaft holes.
- Available with 4 shaft holes.
- Available with 5 shaft holes.
- Available with 6 shaft holes.
- Available with 8 shaft holes.
- Available in SS316L.
- Available in Titanium.
- Features a widened transverse head section.
- Features an oblique head-to-shaft orientation.
- Features an elongated shaft.
- Includes multiple visible fixation openings.
- Includes circular head openings visible in the supplied image.
- Includes elongated / contoured shaft openings visible in the supplied image.
- Supports side-specific implant selection.
- Supports five shaft-hole configurations.
- Supports multiple potential plate-length variants.
- Exact anatomical site within the Radius / Ulna category should be confirmed from the manufacturer’s documentation.
- Exact oblique angle should be confirmed from the technical drawings.
- Exact head-hole count and classification should be confirmed from official documentation.
- Exact compatible screw types and diameters should be confirmed from the manufacturer’s system documentation.
- Exact screw trajectories and locking characteristics should be confirmed from the approved technical drawings.
- Exact plate lengths, head width, and thickness should be confirmed from the manufacturer’s dimensional specifications.
- Individual Cat. No. and GTIN No. should be added when the official product table is available.
- Approved indications, contraindications, and surgical technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.