Pira Mesh (10 MM)

The Pira Mesh (10 mm) is a titanium spinal reconstruction implant designed for integration within compatible spinal reconstruction and stabilization systems according to the manufacturer’s approved indications, Surgical Technique, and Instructions for Use.

The implant features an elongated open mesh / lattice structure incorporating multiple regularly distributed apertures throughout its body. This geometry creates a lightweight structural reconstruction component that can be selected in different lengths according to the anatomical defect, required reconstruction dimensions, implant positioning, and overall spinal construct.

According to the supplied catalog:

Material: Titanium
General Cat. No.: AMS 518.100.000
Product Designation: Pira Mesh (10 mm)

The listed range includes 15 configurations from 12 mm to 40 mm, progressing in regular 2 mm increments. This dimensional selection provides several implant options according to spinal anatomy, reconstruction level, vertebral defect dimensions, required implant length, and intraoperative assessment.

Each configuration carries an individual Cat. No. and GTIN No., supporting accurate implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.

Product Explanation

The Pira Mesh (10 mm) is a titanium mesh-type spinal implant intended to function as a structural component within a compatible reconstruction construct.

A simplified reconstruction concept can be represented as:

Vertebral Reconstruction Site → Pira Mesh → Compatible Supplemental Fixation → Spinal Reconstruction Construct

The perforated mesh body provides the implant’s primary structural geometry and incorporates multiple apertures throughout its length.

Where specifically permitted by the manufacturer’s approved system, mesh-type spinal reconstruction implants may be used together with compatible graft material and supplemental fixation components.

Product Components and Design

1. Titanium Mesh Body

The main structural implant is manufactured from Titanium, according to the supplied catalog data.

2. Open Perforated Geometry

The implant incorporates multiple large openings distributed along the mesh body, producing an open lattice / perforated configuration.

The supplied data does not specify:

• Aperture diameter
• Aperture spacing
• Open-area percentage
• Wall thickness
• Structural strand dimensions

3. Cylindrical / Tubular Mesh Profile

The supplied product image shows an elongated tubular-type reconstruction geometry with repeated openings along its body.

The exact cross-sectional dimensions are not provided.

4. End Geometry

The mesh includes open terminal features at its ends as part of the overall implant geometry.

Their precise function and preparation method are not specified in the supplied catalog.

5. Length-Specific Configurations

Available listed lengths are:

12 / 14 / 16 / 18 / 20 / 22 / 24 / 26 / 28 / 30 / 32 / 34 / 36 / 38 / 40 mm

Intended Use

The Pira Mesh (10 mm) is intended for use within compatible spinal reconstruction systems according to the manufacturer’s approved indications and Instructions for Use.

Potential applications, where included within the approved indications, may include:

• Spinal reconstruction constructs.
• Vertebral column reconstruction.
• Reconstruction of appropriate vertebral defects.
• Interbody or vertebral body reconstruction where specifically approved.
• Integration with compatible spinal stabilization components.
• Use with supplemental fixation systems according to the approved technique.

Selection of the appropriate implant depends on:

• Spinal anatomy.
• Reconstruction level.
• Defect dimensions.
• Required implant length.
• Adjacent vertebral geometry.
• Bone quality.
• Contact surface requirements.
• Supplemental fixation strategy.
• Preoperative planning.
• Intraoperative assessment.

The implant should be selected and implanted by a qualified spine surgeon according to the approved Surgical Technique and IFU.

Key Benefits

Titanium Material

The supplied catalog specifies:

Material: Titanium

Open Mesh Structure

The implant features a perforated lattice-type geometry with multiple openings throughout its body.

10 MM Product Family

The catalog identifies the product as:

Pira Mesh (10 mm)

providing a separate nominal configuration within the Pira Mesh range.

Multiple Length Options

The listed range extends from:

12 mm to 40 mm

Fine 2 MM Progression

Available lengths increase in regular:

2 mm increments

allowing relatively precise configuration selection.

Fifteen Product Configurations

The supplied catalog lists:

15 individual length variants

Reconstruction-Oriented Design

The elongated mesh geometry provides a structural component for compatible spinal reconstruction constructs.

Product Traceability

Each listed configuration has an individual Cat. No. and GTIN No. to support:

• Implant identification
• Product traceability
• Surgical set preparation
• Procurement
• Inventory management
• Stock control

Technical Specifications

Length	Cat. No.	GTIN No.
12 mm	AMS 518.100.012T	6221361020849
14 mm	AMS 518.100.014T	6221361020870
16 mm	AMS 518.100.016T	6221361020900
18 mm	AMS 518.100.018T	6221361020931
20 mm	AMS 518.100.020T	6221361020962
22 mm	AMS 518.100.022T	6221361020993
24 mm	AMS 518.100.024T	6221361021020
26 mm	AMS 518.100.026T	6221361021051
28 mm	AMS 518.100.028T	6221361021082
30 mm	AMS 518.100.030T	6221361021112
32 mm	AMS 518.100.032T	6221361021143
34 mm	AMS 518.100.034T	6221361021174
36 mm	AMS 518.100.036T	6221361021204
38 mm	AMS 518.100.038T	6221361021235
40 mm	AMS 518.100.040T	6221361021143

Technical Overview

Product Name: Pira Mesh (10 mm)
Material: Titanium
Product Type: Spinal Reconstruction Mesh
Product Category: Spinal Reconstruction Implant
General Cat. No.: AMS 518.100.000
Nominal Product Designation: 10 mm
Listed Lengths: 12–40 mm
Length Increment: 2 mm
Number of Configurations: 15
Design: Elongated Open Perforated / Lattice Mesh
Functional Role: Structural component within compatible spinal reconstruction constructs
Anatomical Application: Spine
Identification: Individual Cat. No. and GTIN No. for each listed configuration

Product Features

• Pira Mesh Spinal Reconstruction Design.
• Manufactured from Titanium according to the catalog.
• Nominal designation: 10 mm.
• Open perforated / lattice structure.
• Multiple apertures distributed throughout the implant body.
• Elongated tubular-type reconstruction geometry.
• Available in 15 listed length configurations.
• Length range from 12 to 40 mm.
• Regular 2 mm increments.
• Provides multiple options for reconstruction planning.
• Designed for integration with compatible spinal reconstruction components.
• Individual Cat. No. for each length.
• Individual GTIN No. listed for each configuration.
• Supports implant identification, traceability, procurement, and inventory management.