Pira Mesh (140 MM)

The Pira Mesh (140 mm) is a titanium spinal reconstruction implant designed for integration within compatible spinal reconstruction and stabilization systems according to the manufacturer’s approved indications, Surgical Technique, and Instructions for Use.

The implant features an elongated open mesh / lattice structure incorporating multiple apertures distributed throughout its body. This perforated geometry forms the principal structural configuration of the implant and provides a range of length-specific options for different reconstruction requirements.

According to the supplied catalog:

Material: Titanium
General Cat. No.: AMS 518.140.000
Product Designation: Pira Mesh (140 mm)

The supplied family includes 38 listed configurations ranging from 12 mm to 86 mm, progressing in regular 2 mm increments. This broad dimensional range allows implant selection according to factors such as spinal anatomy, reconstruction level, defect dimensions, required implant length, adjacent vertebral geometry, and intraoperative assessment.

Each configuration carries an individual Cat. No. and GTIN No., supporting accurate implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.

Product Explanation

The Pira Mesh is a titanium mesh-type implant intended to function as a structural component within a compatible spinal reconstruction construct.

A simplified reconstruction concept can be represented as:

Spinal Reconstruction Site → Pira Mesh → Compatible Supplemental Fixation → Spinal Reconstruction Construct

The open lattice body provides the primary structural geometry of the implant and incorporates multiple apertures throughout its length.

Where permitted by the manufacturer’s approved technique, mesh-type spinal implants may be incorporated into reconstruction constructs with compatible graft and supplemental fixation components.

Product Components and Design

1. Titanium Mesh Body

The implant is manufactured from Titanium, according to the supplied catalog data.

2. Open Lattice / Perforated Geometry

The implant incorporates multiple openings distributed throughout the mesh body.

This creates its characteristic open reconstruction structure.

The supplied catalog does not specify:

• Aperture dimensions
• Aperture spacing
• Wall thickness
• Open-area percentage
• Structural strand dimensions

3. Elongated Reconstruction Profile

The supplied product image shows an elongated mesh configuration designed to accommodate multiple implant lengths.

4. Tubular / Channel-Type Structure

The mesh appears to form a partially tubular or channel-like configuration with repeated openings distributed around the implant body.

Exact transverse dimensions are not provided in the catalog.

5. Terminal Geometry

The superior and inferior ends contain open structural features forming part of the mesh design.

Their precise mechanical function, trimming limits, and preparation requirements are not specified.

6. Extensive Length Range

The supplied product family includes:

12 / 14 / 16 / 18 / 20 / 22 / 24 / 26 / 28 / 30 / 32 / 34 / 36 / 38 / 40 / 42 / 44 / 46 / 48 / 50 / 52 / 54 / 56 / 58 / 60 / 62 / 64 / 66 / 68 / 70 / 72 / 74 / 76 / 78 / 80 / 82 / 84 / 86 mm

Intended Use

The Pira Mesh (140 mm) is intended for use within compatible spinal reconstruction systems, according to the manufacturer’s approved indications and Instructions for Use.

Potential applications, where specifically included within the approved indications, may include:

• Spinal reconstruction constructs.
• Vertebral column reconstruction.
• Reconstruction of appropriate vertebral defects.
• Vertebral body reconstruction where approved.
• Integration with compatible supplemental spinal fixation systems.
• Structural support within compatible spinal reconstruction procedures.

Selection of the appropriate configuration depends on:

• Spinal anatomy.
• Reconstruction level.
• Defect dimensions.
• Required reconstruction length.
• Adjacent vertebral geometry.
• Bone quality.
• Implant contact requirements.
• Supplemental fixation strategy.
• Preoperative planning.
• Intraoperative assessment.

The implant should be selected and implanted by a qualified spine surgeon according to the manufacturer’s approved Surgical Technique and IFU.

Key Benefits

Titanium Material

The supplied catalog specifies:

Material: Titanium

Open Mesh Structure

The implant features a perforated lattice / mesh geometry with multiple structural openings.

Broad Length Selection

The listed range extends from:

12 mm to 86 mm

Fine 2 MM Progression

Available configurations increase in regular:

2 mm increments

providing relatively fine dimensional selection.

38 Product Configurations

The supplied catalog contains:

38 individual length variants

within the product family.

Reconstruction-Oriented Design

The elongated mesh configuration provides a structural option for compatible spinal reconstruction constructs.

Product Traceability

Each configuration carries an individual Cat. No. and GTIN No. to support:

• Implant identification
• Product traceability
• Surgical set preparation
• Procurement
• Inventory management
• Stock control

Technical Specifications

Length	Cat. No.	GTIN No.
12 mm	AMS 518.140.012T	6221361022850
14 mm	AMS 518.140.014T	6221361022881
16 mm	AMS 518.140.016T	6221361022911
18 mm	AMS 518.140.018T	6221361022942
20 mm	AMS 518.140.020T	6221361022973
22 mm	AMS 518.140.022T	6221361023000
24 mm	AMS 518.140.024T	6221361023031
26 mm	AMS 518.140.026T	6221361023062
28 mm	AMS 518.140.028T	6221361023093
30 mm	AMS 518.140.030T	6221361023123
32 mm	AMS 518.140.032T	6221361023154
34 mm	AMS 518.140.034T	6221361023185
36 mm	AMS 518.140.036T	6221361023215
38 mm	AMS 518.140.038T	6221361023246
40 mm	AMS 518.140.040T	6221361023277
42 mm	AMS 518.140.042T	6221361023307
44 mm	AMS 518.140.044T	6221361023338
46 mm	AMS 518.140.046T	6221361023369
48 mm	AMS 518.140.048T	6221361023390
50 mm	AMS 518.140.050T	6221361023420
52 mm	AMS 518.140.052T	6221361023451
54 mm	AMS 518.140.054T	6221361023482
56 mm	AMS 518.140.056T	6221361023512
58 mm	AMS 518.140.058T	6221361023543
60 mm	AMS 518.140.060T	6221361023574
62 mm	AMS 518.140.062T	6221361023604
64 mm	AMS 518.140.064T	6221361023635
66 mm	AMS 518.140.066T	6221361023666
68 mm	AMS 518.140.068T	6221361023697
70 mm	AMS 518.140.070T	6221361023727
72 mm	AMS 518.140.072T	6221361023758
74 mm	AMS 518.140.074T	6221361023789
76 mm	AMS 518.140.076T	6221361023819
78 mm	AMS 518.140.078T	6221361023840
80 mm	AMS 518.140.080T	6221361023871
82 mm	AMS 518.140.082T	6221361023901
84 mm	AMS 518.140.084T	6221361023932
86 mm	AMS 518.140.086T	6221361023963

Technical Overview

Product Name: Pira Mesh (140 mm)
Material: Titanium
Product Type: Spinal Reconstruction Mesh
Product Category: Spinal Reconstruction Implant
General Cat. No.: AMS 518.140.000
Catalog Designation: 140 mm
Listed Lengths: 12–86 mm
Length Increment: 2 mm
Number of Configurations: 38
Design: Elongated Open Lattice / Perforated Mesh
Functional Role: Structural component within compatible spinal reconstruction constructs
Anatomical Application: Spine
Identification: Individual Cat. No. and GTIN No. for each listed configuration

Product Features

• Pira Mesh Spinal Reconstruction Design.
• Manufactured from Titanium according to the catalog.
• Catalog designation: 140 mm.
• Open lattice / perforated mesh geometry.
• Multiple apertures distributed throughout the implant body.
• Elongated reconstruction configuration.
• Available in 38 listed lengths.
• Length range from 12 to 86 mm.
• Regular 2 mm increments.
• Provides extensive dimensional options for reconstruction planning.
• Designed for integration with compatible spinal reconstruction components.
• Individual Cat. No. for every listed configuration.
• Individual GTIN No. for every listed configuration.
• Supports implant identification, traceability, procurement, and inventory management.