Pira Mesh (160 MM)

The Pira Mesh (160 mm) is a titanium spinal reconstruction implant designed for integration within compatible spinal reconstruction and stabilization systems according to the manufacturer’s approved indications, Surgical Technique, and Instructions for Use.

The implant features an elongated open lattice / perforated mesh geometry with multiple apertures distributed throughout its body. This configuration provides a structural component for compatible vertebral reconstruction constructs while allowing selection from a wide range of implant lengths.

According to the supplied catalog:

Material: Titanium
General Cat. No.: AMS 518.160.000
Product Designation: Pira Mesh (160 mm)

The supplied product family contains 38 listed configurations ranging from 12 mm to 86 mm, progressing in regular 2 mm increments. This broad range provides multiple options for implant selection based on spinal anatomy, reconstruction level, vertebral defect dimensions, required implant length, adjacent vertebral geometry, and intraoperative assessment.

Each configuration carries an individual Cat. No. and GTIN No., supporting accurate implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.

Product Explanation

The Pira Mesh is a titanium mesh-type spinal implant intended to function as a structural component within a compatible reconstruction construct.

A simplified reconstruction concept can be represented as:

Spinal Reconstruction Site → Pira Mesh → Compatible Supplemental Fixation → Spinal Reconstruction Construct

The open mesh body provides the implant’s principal structural geometry and incorporates multiple apertures throughout its length.

Where specifically permitted by the manufacturer’s approved technique, mesh-type spinal implants may be combined with compatible graft material and supplemental fixation components.

Product Components and Design

1. Titanium Mesh Body

The principal implant structure is manufactured from Titanium, according to the supplied catalog data.

2. Open Lattice / Perforated Geometry

The implant incorporates multiple openings throughout its structure, creating the characteristic open mesh configuration.

The supplied catalog does not specify:

• Aperture dimensions
• Aperture spacing
• Mesh wall thickness
• Open-area percentage
• Structural strand dimensions

3. Elongated Reconstruction Profile

The supplied product image shows an elongated implant geometry intended to accommodate a broad range of listed lengths.

4. Tubular / Channel-Type Mesh Structure

The mesh appears to have a tubular or channel-like cross-sectional profile with repeated openings distributed around its structure.

Exact transverse dimensions are not provided.

5. Terminal Geometry

The ends of the implant contain open structural features as part of the mesh design.

The precise mechanical function, trimming limits, and preparation requirements are not specified in the supplied catalog.

6. Extensive Length Range

The supplied family includes:

12 / 14 / 16 / 18 / 20 / 22 / 24 / 26 / 28 / 30 / 32 / 34 / 36 / 38 / 40 / 42 / 44 / 46 / 48 / 50 / 52 / 54 / 56 / 58 / 60 / 62 / 64 / 66 / 68 / 70 / 72 / 74 / 76 / 78 / 80 / 82 / 84 / 86 mm

for a total of 38 configurations.

Intended Use

The Pira Mesh (160 mm) is intended for use within compatible spinal reconstruction systems, according to the manufacturer’s approved indications and Instructions for Use.

Potential applications, where specifically included within the approved indications, may include:

• Spinal reconstruction constructs.
• Vertebral column reconstruction.
• Reconstruction of appropriate vertebral defects.
• Vertebral body reconstruction where approved.
• Integration with compatible supplemental spinal fixation systems.
• Structural support within compatible spinal reconstruction procedures.

Selection of the appropriate configuration depends on:

• Spinal anatomy.
• Reconstruction level.
• Defect dimensions.
• Required reconstruction length.
• Adjacent vertebral geometry.
• Bone quality.
• Implant contact requirements.
• Supplemental fixation strategy.
• Preoperative planning.
• Intraoperative assessment.

The implant should be selected and implanted by a qualified spine surgeon according to the manufacturer’s approved Surgical Technique and IFU.

Key Benefits

Titanium Material

The supplied catalog specifies:

Material: Titanium

Open Mesh Geometry

The implant features a perforated lattice / mesh structure with multiple openings throughout the body.

Extensive Length Selection

The supplied product range extends from:

12 mm to 86 mm

Fine 2 MM Length Progression

Available configurations increase in regular:

2 mm increments

providing relatively precise dimensional selection.

38 Product Configurations

The supplied catalog contains:

38 individual length variants

within the Pira Mesh (160 mm) family.

Reconstruction-Oriented Design

The elongated open mesh configuration provides a structural implant option for compatible spinal reconstruction constructs.

Product Traceability

Each configuration carries an individual Cat. No. and GTIN No. to support:

• Implant identification
• Product traceability
• Surgical set preparation
• Procurement
• Inventory management
• Stock control

Technical Specifications

Length	Cat. No.	GTIN No.
12 mm	AMS 518.160.012T	6221361023994
14 mm	AMS 518.160.014T	6221361024021
16 mm	AMS 518.160.016T	6221361024052
18 mm	AMS 518.160.018T	6221361024083
20 mm	AMS 518.160.020T	6221361024113
22 mm	AMS 518.160.022T	6221361024144
24 mm	AMS 518.160.024T	6221361024175
26 mm	AMS 518.160.026T	6221361024205
28 mm	AMS 518.160.028T	6221361024236
30 mm	AMS 518.160.030T	6221361024267
32 mm	AMS 518.160.032T	6221361024298
34 mm	AMS 518.160.034T	6221361024328
36 mm	AMS 518.160.036T	6221361024359
38 mm	AMS 518.160.038T	6221361024380
40 mm	AMS 518.160.040T	6221361024410
42 mm	AMS 518.160.042T	6221361024441
44 mm	AMS 518.160.044T	6221361024472
46 mm	AMS 518.160.046T	6221361024502
48 mm	AMS 518.160.048T	6221361024533
50 mm	AMS 518.160.050T	6221361024564
52 mm	AMS 518.160.052T	6221361024595
54 mm	AMS 518.160.054T	6221361017108
56 mm	AMS 518.160.056T	6221361017139
58 mm	AMS 518.160.058T	6221361017160
60 mm	AMS 518.160.060T	6221361017191
62 mm	AMS 518.160.062T	6221361017221
64 mm	AMS 518.160.064T	6221361017252
66 mm	AMS 518.160.066T	6221361017283
68 mm	AMS 518.160.068T	6221361017313
70 mm	AMS 518.160.070T	6221361017344
72 mm	AMS 518.160.072T	6221361017375
74 mm	AMS 518.160.074T	6221361017405
76 mm	AMS 518.160.076T	6221361017436
78 mm	AMS 518.160.078T	6221361017467
80 mm	AMS 518.160.080T	6221361017498
82 mm	AMS 518.160.082T	6221361017528
84 mm	AMS 518.160.084T	6221361017559
86 mm	AMS 518.160.086T	6221361017580

Technical Overview

Product Name: Pira Mesh (160 mm)
Material: Titanium
Product Type: Spinal Reconstruction Mesh
Product Category: Spinal Reconstruction Implant
General Cat. No.: AMS 518.160.000
Catalog Designation: 160 mm
Listed Lengths: 12–86 mm
Length Increment: 2 mm
Number of Configurations: 38
Design: Elongated Open Lattice / Perforated Mesh
Functional Role: Structural component within compatible spinal reconstruction constructs
Anatomical Application: Spine
Identification: Individual Cat. No. and GTIN No. for each listed configuration

Product Features

• Pira Mesh Spinal Reconstruction Design.
• Manufactured from Titanium according to the catalog.
• Catalog designation: 160 mm.
• Open lattice / perforated mesh geometry.
• Multiple apertures distributed throughout the implant body.
• Elongated tubular-type reconstruction configuration.
• Available in 38 listed length configurations.
• Length range from 12 to 86 mm.
• Regular 2 mm increments.
• Provides extensive dimensional options for reconstruction planning.
• Designed for integration with compatible spinal reconstruction components.
• Individual Cat. No. for every listed length.
• Individual GTIN No. for every configuration.
• Supports implant identification, traceability, procurement, and inventory management.