Pira Mesh (8 MM)

The Pira Mesh (8 mm) is a titanium spinal reconstruction implant designed for use within compatible spinal reconstruction and stabilization systems according to the manufacturer’s approved indications and surgical technique.

The implant features an elongated open lattice mesh geometry with multiple interconnected apertures distributed throughout its body. This mesh-type structure provides a defined reconstruction component that can be selected in different lengths according to the anatomical defect, required implant coverage, reconstruction level, and overall spinal construct.

According to the supplied catalog:

Material: Titanium
General Cat. No.: AMS 518.080.000
Product Designation: Pira Mesh (8 mm)

The supplied product range includes 38 listed lengths from 12 mm to 86 mm, progressing in regular 2 mm increments. This extensive dimensional range provides multiple options for implant selection based on spinal anatomy, reconstruction dimensions, required implant length, vertebral defect size, and intraoperative assessment.

Each configuration has an individual Cat. No. and GTIN No., supporting accurate implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.

Product Explanation

The Pira Mesh is an open-structure titanium implant intended to form part of a compatible spinal reconstruction construct.

A simplified reconstruction concept may be represented as:

Vertebral Region / Reconstruction Site → Pira Mesh → Compatible Fixation Components → Spinal Reconstruction Construct

The open mesh geometry forms the principal structural characteristic of the implant and provides multiple apertures throughout the body.

Where permitted by the manufacturer’s approved surgical technique, mesh-type spinal implants may be incorporated into reconstruction procedures with compatible graft material and supplemental fixation components.

The exact approved anatomical indications and graft technique should be confirmed from the official IFU.

Product Components and Design

1. Titanium Mesh Body

The primary implant structure is manufactured from Titanium, according to the supplied catalog information.

2. Open Lattice Geometry

The implant features multiple regularly distributed openings forming an interconnected mesh / lattice structure.

This geometry distinguishes the product from solid spinal cages or plates.

3. Elongated Implant Profile

The product has an elongated configuration and is supplied in multiple lengths to accommodate different reconstruction requirements.

4. Multiple Structural Apertures

The numerous apertures incorporated throughout the implant may provide access through the implant structure and form part of its reconstruction geometry.

The supplied catalog does not define:

• Aperture dimensions
• Open-area percentage
• Mesh strand width
• Wall thickness
• Graft volume

5. Length-Specific Configurations

The supplied table lists lengths from:

12 mm to 86 mm

in regular:

2 mm increments

for a total of 38 configurations.

Intended Use

The Pira Mesh (8 mm) is intended for use within compatible spinal reconstruction systems according to the manufacturer’s approved indications and Instructions for Use.

Potential applications, when included within the approved indications, may include:

• Spinal reconstruction constructs.
• Vertebral column reconstruction.
• Reconstruction following appropriate vertebral or disc-space procedures.
• Interbody or vertebral defect reconstruction where specifically approved.
• Integration with compatible spinal stabilization components.
• Use as part of a supplemental spinal fixation construct.

Selection of the appropriate configuration depends on:

• Spinal anatomy.
• Reconstruction level.
• Defect dimensions.
• Required implant length.
• Adjacent vertebral geometry.
• Bone quality.
• Endplate / vertebral contact requirements.
• Supplemental fixation construct.
• Preoperative planning.
• Intraoperative assessment.

The implant should be selected and implanted by a qualified spine surgeon according to the approved Surgical Technique and IFU.

Key Benefits

Titanium Material

The supplied catalog specifies:

Material: Titanium

Open Mesh Construction

The implant features an open lattice / mesh geometry with numerous apertures incorporated throughout the structure.

Extensive Length Selection

The supplied range extends from:

12 mm to 86 mm

providing numerous configuration options.

2 MM Length Progression

Available variants increase in regular:

2 mm increments

allowing relatively fine dimensional selection.

38 Product Configurations

The supplied table contains:

38 listed implant lengths

within the Pira Mesh (8 mm) family.

Reconstruction-Oriented Geometry

The elongated mesh configuration provides a structural implant option for compatible spinal reconstruction systems.

Product Traceability

Each listed configuration includes an individual Cat. No. and GTIN No. to support:

• Implant identification
• Product traceability
• Surgical set preparation
• Procurement
• Inventory management
• Stock control

Technical Specifications

Length	Cat. No.	GTIN No.
12 mm	AMS 518.080.012T	6221361019706
14 mm	AMS 518.080.014T	6221361019737
16 mm	AMS 518.080.016T	6221361019768
18 mm	AMS 518.080.018T	6221361019799
20 mm	AMS 518.080.020T	6221361019829
22 mm	AMS 518.080.022T	6221361019850
24 mm	AMS 518.080.024T	6221361019881
26 mm	AMS 518.080.026T	6221361019911
28 mm	AMS 518.080.028T	6221361019942
30 mm	AMS 518.080.030T	6221361019973
32 mm	AMS 518.080.032T	6221361020009
34 mm	AMS 518.080.034T	6221361020030
36 mm	AMS 518.080.036T	6221361020061
38 mm	AMS 518.080.038T	6221361020092
40 mm	AMS 518.080.040T	6221361020122
42 mm	AMS 518.080.042T	6221361020153
44 mm	AMS 518.080.044T	6221361020184
46 mm	AMS 518.080.046T	6221361020214
48 mm	AMS 518.080.048T	6221361020245
50 mm	AMS 518.080.050T	6221361020276
52 mm	AMS 518.080.052T	6221361020306
54 mm	AMS 518.080.054T	6221361020337
56 mm	AMS 518.080.056T	6221361020368
58 mm	AMS 518.080.058T	6221361020399
60 mm	AMS 518.080.060T	6221361020429
62 mm	AMS 518.080.062T	6221361020450
64 mm	AMS 518.080.064T	6221361020481
66 mm	AMS 518.080.066T	6221361020511
68 mm	AMS 518.080.068T	6221361020542
70 mm	AMS 518.080.070T	6221361020573
72 mm	AMS 518.080.072T	6221361020603
74 mm	AMS 518.080.074T	6221361020634
76 mm	AMS 518.080.076T	6221361020665
78 mm	AMS 518.080.078T	6221361020696
80 mm	AMS 518.080.080T	6221361020726
82 mm	AMS 518.080.082T	6221361020757
84 mm	AMS 518.080.084T	6221361020788
86 mm	AMS 518.080.086T	6221361020818

Technical Overview

Product Name: Pira Mesh (8 mm)
Material: Titanium
Product Type: Spinal Reconstruction Mesh
Product Category: Spinal Reconstruction Implant
General Cat. No.: AMS 518.080.000
Nominal Product Designation: 8 mm
Listed Lengths: 12–86 mm
Length Increment: 2 mm
Number of Visible Configurations: 38
Design: Elongated Open Lattice / Mesh Structure
Functional Role: Structural component within compatible spinal reconstruction constructs
Anatomical Application: Spine
Identification: Individual Cat. No. and GTIN No. for each listed length

Product Features

• Pira Mesh Spinal Reconstruction Design.
• Manufactured from Titanium according to the catalog.
• Open lattice / mesh implant structure.
• Multiple apertures distributed throughout the implant body.
• Elongated reconstruction geometry.
• Nominal product designation: 8 mm.
• Available in 38 visible length configurations.
• Listed range from 12 to 86 mm.
• Regular 2 mm increments.
• Provides a broad dimensional selection for reconstruction planning.
• Designed for integration with compatible spinal fixation components.
• Individual Cat. No. for every listed length.
• Individual GTIN No. for every listed configuration.
• Supports implant identification, traceability, procurement, and inventory management.