The Threaded Connector is a titanium spinal fixation component designed for integration within compatible posterior spinal instrumentation systems according to the manufacturer’s approved indications and surgical technique.
The product features an elongated threaded shaft geometry designed to provide a mechanical connection interface between compatible spinal fixation components. Its threaded profile extends along a substantial portion of the connector body, allowing it to function as part of a modular spinal construct according to the specific system configuration.
According to the supplied catalog information, the component is manufactured from:
Material: Titanium
The product family is listed under:
Cat. No.: AMS 500.031.000
The supplied catalog lists one configuration:
Standard
with the individual product code:
AMS 500.031.000T
and:
GTIN No.: 6221361022119
This standardized product identification supports implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.
Product Explanation
The Threaded Connector is a mechanical spinal fixation component used to connect compatible elements within a spinal stabilization construct.
A simplified connection concept can be represented as:
Spinal Fixation Component → Threaded Connector → Compatible Connector / Rod Interface → Spinal Fixation Construct
The threaded shaft provides the mechanical engagement interface, while the terminal portions of the connector integrate with compatible fixation components according to the system design.
Product Components and Design
- Titanium Connector Body
The main structural component is manufactured from Titanium, according to the supplied product data.
- Elongated Threaded Shaft
A substantial portion of the connector body incorporates a continuous threaded profile.
This geometry forms the primary mechanical engagement interface.
The supplied catalog does not specify:
- Thread diameter
- Thread pitch
- Thread profile
- Thread standard
- Threaded length
- Distal Threaded End
One end of the connector forms part of the threaded engagement geometry and is designed to interface with a compatible component.
- Proximal Terminal Section
The opposite end includes a terminal section that may serve as an instrumentation or connection interface according to the system design.
Its precise function is not specified in the supplied catalog.
- Standard Configuration
The product is listed in one configuration:
Standard
No additional Long, Short, or other variants are shown in the supplied table.
Intended Use
The Threaded Connector is intended for use within compatible spinal fixation systems, according to the manufacturer’s approved indications and Instructions for Use.
Potential applications, where included within the approved indications, may include:
- Posterior spinal fixation constructs.
- Connection of compatible spinal fixation components.
- Modular spinal instrumentation assemblies.
- Rod / connector-based spinal constructs.
- Spinal reconstruction procedures.
- Multi-component posterior stabilization systems.
Selection and use of the connector depend on:
- Construct geometry.
- Compatible fixation components.
- Thread compatibility.
- Component positioning.
- Spinal level.
- Available surgical space.
- Preoperative planning.
- Intraoperative assessment.
The component should be selected and installed by a qualified spine surgeon according to the approved surgical technique and IFU.
Key Benefits
Titanium Material
The supplied catalog specifies:
Material: Titanium
Threaded Connection Geometry
The implant features an elongated threaded shaft designed to provide a mechanical connection interface within compatible spinal fixation systems.
Standardized Configuration
The product is supplied as a:
Standard Configuration
for straightforward product selection within the corresponding system.
Modular Construct Integration
Designed to integrate with compatible fixation components as part of a modular spinal construct.
Compact Mechanical Connection Component
The elongated connector geometry provides a dedicated threaded interface without requiring a complex multi-part component.
Product Traceability
The product includes dedicated identification data to support:
- Implant identification.
- Product traceability.
- Surgical set preparation.
- Procurement.
- Inventory management.
- Stock control.
Technical Specifications
| Type | Cat. No. | GTIN No. |
| Standard | AMS 500.031.000T | 6221361022119 |
Technical Overview
Product Name: Threaded Connector
Material: Titanium
Product Type: Spinal Threaded Connector
Product Category: Posterior Spinal Fixation Component
General Cat. No.: AMS 500.031.000
Available Type: Standard
Number of Configurations: 1
Design: Elongated Threaded Connector
Fixation Concept: Mechanical Threaded Connection between compatible spinal fixation components
Anatomical Application: Spine
Identification: Individual Cat. No. and GTIN No.
Product Features
- Threaded Spinal Connector Design.
- Manufactured from Titanium according to the catalog.
- Designed for compatible spinal fixation systems.
- Elongated threaded shaft geometry.
- Provides a mechanical threaded connection interface.
- Standard configuration.
- Compact modular fixation component.
- Designed for integration with compatible spinal construct elements.
- Individual Cat. No.
- Individual GTIN No.
- Supports implant identification, traceability, procurement, and inventory management.
Reviews
There are no reviews yet.