Connection Bolts are mechanical connecting components used within Orthopedic External Fixation systems, functioning as Fastening / Connection Components for assembling and securing compatible External Fixator components within the Final Frame Construct.
The Connection Bolt is used to join system components according to the Connection Geometry of each component, supporting construction of the required Frame Configuration during preparation and assembly of the External Fixation system.
According to the provided product data, the range is listed under the general reference:
Cat. No.: AMS 602.018
The product is available in three lengths: 12 mm, 16 mm, and 30 mm, providing multiple options when selecting the appropriate Bolt Length according to Component Thickness, Connection Depth, Frame Configuration, and compatibility between system components.
Each length carries an individual Cat. No. and GTIN Number, facilitating Product Identification, Surgical Set Preparation, Product Traceability, Procurement, Inventory Management, and Stock Control.
Each Connection Bolt should only be used with compatible components and instruments according to the Technical Documentation of the External Fixation system.
Product Description
A Connection Bolt is a Mechanical Fastening Component used to connect two or more components within an Orthopedic Fixation system.
Within External Fixation systems, it may form part of connections between components such as:
Ring / Arch / Clamp / Connecting Component → Connection Bolt → External Fixator Assembly
The bolt functions as part of the Mechanical Interface that maintains component assembly according to the Frame Configuration specified by the fixation system and surgeon.
The range is available in three lengths:
12 MM | 16 MM | 30 MM
Product Components and Design
- Bolt Head
The upper section of the Bolt, designed for engagement with a compatible fastening tool or Driver during Assembly and Tightening.
The specific Drive Interface is not identified in the provided product data.
- Threaded Shaft
The threaded section of the Connection Bolt designed to provide Mechanical Engagement with a compatible Threaded Interface or Fastening Component.
The provided table does not specify:
- Thread Diameter
- Thread Pitch
- Thread Standard
- Thread Length
Therefore, these specifications should not be stated without reference to the official Technical Datasheet.
- Shank / Bolt Body
The longitudinal body of the Bolt, defining its overall length and allowing selection of an appropriate configuration according to connection requirements.
- Connection Interface
The Bolt functions as part of the Mechanical Interface with compatible components of the External Fixation System.
- Length-Specific Configuration
The product range is available in:
- 12 mm
- 16 mm
- 30 mm
providing multiple Fastening Length options during Frame Assembly.
Product Use
Connection Bolts are used within compatible Orthopedic External Fixation systems to assemble and connect Frame Components.
Depending on the fixation system design, they may be used to connect:
- Rings
- Half Rings
- C-Rings
- Omega Rings
- Femoral Arches
- Connecting Rods
- Clamps
- Other Compatible External Fixation Components
Selection of the appropriate Bolt Length depends on:
- Component Thickness
- Connection Geometry
- Required Engagement Depth
- Frame Configuration
- Compatible Threaded Interface
- Surgical Set Configuration
- Intraoperative Assembly Requirements
The Bolt should be used according to the applicable Surgical Technique and Assembly Instructions of the fixation system.
Key Benefits
Secure Component Connection
The Connection Bolt provides a mechanical fastening element between compatible components of the External Fixation Construct.
Three Length Options
The product range is available in:
12 / 16 / 30 mm
to accommodate different Component Assembly requirements.
Modular Fixator Integration
Designed to function within a Modular External Fixation System with compatible components.
Frame Assembly Flexibility
Different length options allow selection of the appropriate Bolt Configuration according to component thickness and connection requirements.
Structured Product Identification
Each length carries an individual product code, facilitating:
- Product Identification
- Surgical Set Preparation
- Procurement
- Inventory Management
GTIN Traceability
An individual GTIN Number for each variant supports:
- Product Traceability
- Stock Control
- Inventory Tracking
- Supply Chain Management
Technical Specifications
| Length | Cat. No. | GTIN No. |
| 12 mm | AMS 602.018.012 | 6221361014817 |
| 16 mm | AMS 602.018.016 | 6221361014831 |
| 30 mm | AMS 602.018.030 | 6221361014855 |
Technical Overview
Product Name: Connection Bolts
Product Type: Orthopedic Connection / Fastening Bolt
Product Category: External Fixation Connection Component
General Cat. No.: AMS 602.018
Available Lengths: 12 / 16 / 30 mm
Minimum Length: 12 mm
Maximum Length: 30 mm
Number of Configurations: 3
Functional Role: Mechanical Connection of Compatible External Fixator Components
System Application: Modular External Fixation Assembly
Identification: Individual Cat. No. & GTIN No. for each length
Product Features
- Orthopedic Connection Bolt Design.
- Intended for assembling compatible External Fixation System components.
- Functions as a Mechanical Fastening Component.
- Available in 3 Length Configurations.
- Available lengths: 12, 16, and 30 mm.
- Provides multiple options during Frame Assembly.
- Supports connection of Fixator components according to the system-specific Connection Geometry.
- Suitable for use with compatible Rings, Arches, Clamps, and other fixation components.
- Supports assembly of the Modular External Fixator Construct.
- General Cat. No.: AMS 602.018.
- Individual Cat. No. for each length.
- Individual GTIN Number for each configuration.
- Supports Product Traceability.
- Facilitates Procurement, Inventory Management, and Stock Control.
Reviews
There are no reviews yet.