Pinning Schanz Pins are components used within Orthopedic Fixation systems and are designed to function as Bone Anchoring / Pinning Elements within compatible Fixation Constructs. The intended portion of the Pin is inserted into the bone and connected to compatible surgical components or an External Fixator according to the applicable Surgical Technique.
This product family features a combined dimensional configuration according to the provided data, with specifications incorporating Ø4 mm and Ø3.4 mm dimensions together with different lengths. This provides multiple Pin Configurations that may be selected according to Bone Anatomy, Fixation Site, Pin Trajectory, Required Bone Engagement, and the surgical plan.
The family includes three listed configurations:
- Ø4 mm × 80 mm – Ø3.4 mm × 20 mm
- Ø4 mm × 80 mm – Ø3.4 mm × 35 mm
- Ø4 mm × 70 mm – Ø3.4 mm × 20 mm
The range is listed under the general reference:
Cat. No.: AMS 605.434
Each configuration carries an individual product code and GTIN Number, facilitating Product Identification, Surgical Set Preparation, Product Traceability, Procurement, Inventory Management, and Stock Control.
Product Description
A Pinning Schanz Pin is an Orthopedic Fixation Pin incorporating a Shaft Geometry and Bone Engagement Section within a configuration designed for interaction with bone according to the approved fixation technique.
The illustrated product features a Threaded Distal Section together with an elongated shaft, allowing it to function as a Bone Anchorage element within the compatible fixation system.
The catalog presents compound dimensional specifications such as:
Ø4 mm × 80 mm – Ø3.4 mm × 20 mm
However, the provided table does not formally define each dimension as a Shaft Diameter, Thread Diameter, Thread Length, or another specific geometric parameter. Therefore, the specification should be retained exactly as listed in the catalog without further interpretation unless confirmed by the official Technical Datasheet.
Product Components and Design
- Main Pin Shaft
The main longitudinal body of the Schanz Pin, functioning as part of the Fixation Construct.
The listed dimensions associated with the main section include:
Ø4 mm with 70 mm or 80 mm, depending on the configuration.
- Threaded Bone Engagement Section
The product image shows a threaded section intended to provide Mechanical Engagement within the bone.
The listed product data include dimensions of:
Ø3.4 mm × 20 mm
or
Ø3.4 mm × 35 mm
However, the precise engineering definition of these dimensions should be confirmed using the official Technical Datasheet.
- Distal Tip
The distal end of the Pin used to advance along the Bone Path according to the applicable Surgical Technique.
The currently provided data do not specify whether the Tip Design is Self-Drilling, Trocar, or another configuration.
- Proximal Shaft Section
The proximal portion of the Pin intended for interaction with compatible insertion instruments or fixation-system components.
- Configuration-Specific Geometry
The product family is available in three different variants, allowing selection of an appropriate configuration according to the required length and Bone Engagement requirements.
Product Use
Pinning Schanz Pins are used within compatible Orthopedic Fixation applications and, depending on the officially approved indications, may be incorporated into:
- Bone Pinning
- External Fixation
- Temporary Skeletal Stabilization
- Bone Segment Fixation
- Fracture Stabilization
- Orthopedic Reconstruction Constructs
- Bone-to-Fixator Anchorage within compatible systems
Selection of the appropriate configuration depends on factors including:
- Bone Anatomy
- Bone Quality
- Fixation Site
- Bone Segment
- Pin Trajectory
- Required Engagement Length
- External Fixator Compatibility
- Preoperative Planning
- Intraoperative Assessment
The product should be selected and used by a Qualified Orthopedic Surgeon in accordance with the approved IFU and Surgical Technique.
Key Benefits
Multiple Pinning Configurations
The product family is available in 3 Configurations to accommodate different Bone Fixation requirements.
Ø4 MM / Ø3.4 MM Geometry
The listed specifications combine Ø4 mm and Ø3.4 mm dimensions within a single Pin Configuration according to the catalog.
Different Length Options
The range includes primary listed length options of:
70 mm and 80 mm
with additional listed sections of:
20 mm and 35 mm
Threaded Bone Engagement
The product features a Threaded Distal Geometry intended for Bone Engagement according to the applicable surgical technique.
Orthopedic Fixation Integration
Designed to function as part of a compatible Pinning / External Fixation Construct.
Product Traceability
Each variant carries an individual Cat. No. and GTIN Number to support:
- Product Identification
- Product Traceability
- Procurement
- Inventory Management
- Stock Control
Technical Specifications
| Specification as Listed | Cat. No. | GTIN No. |
| Ø4 mm × 80 mm – Ø3.4 mm × 20 mm | AMS 605.434.280 | 6221361013742 |
| Ø4 mm × 80 mm – Ø3.4 mm × 35 mm | AMS 605.434.350 | 6221361013766 |
| Ø4 mm × 70 mm – Ø3.4 mm × 20 mm | AMS 605.434.270 | 6221361013780 |
Technical Overview
Product Name: Pinning Schanz Pins
Product Type: Orthopedic Schanz Pin / Bone Fixation Pin
Product Category: Orthopedic Pinning & External Fixation Component
General Cat. No.: AMS 605.434
Listed Diameters: Ø4 mm / Ø3.4 mm
Listed Main Length Options: 70 / 80 mm
Listed Secondary Length Options: 20 / 35 mm
Number of Configurations: 3
Design Feature: Shaft with Threaded Bone Engagement Section
Primary Function: Bone Anchorage / Pinning according to approved indication
Identification: Individual Cat. No. & GTIN No. for each configuration
Product Features
- Pinning Schanz Pin Design.
- Intended for compatible Orthopedic Fixation applications.
- Incorporates a Threaded Bone Engagement Section.
- Combines listed dimensions of Ø4 mm and Ø3.4 mm.
- Available with primary listed lengths of 70 and 80 mm.
- Listed secondary length options of 20 and 35 mm.
- Total of 3 Product Configurations.
- Provides multiple options during Pin Selection.
- Supports Bone Anchorage within the Fixation Construct.
- Suitable for integration with compatible External Fixation systems.
- Supports Preoperative Planning.
- Provides flexibility during Intraoperative Pin Selection.
- Individual Cat. No. for each configuration.
- Individual GTIN Number for each variant.
- Supports Product Traceability, Procurement, Inventory Management, and Stock Control.
Reviews
There are no reviews yet.