AMFEX Dynamic Axial Movable T-Head External Fixator for Tibia in Adult is an Orthopedic External Fixation system designed, according to the provided product information, for external fixation applications involving the Tibia in adult patients.
The system incorporates a Dynamic Axial External Fixator Configuration with a Movable T-Head Design at one end of the device, together with a Central Fixator Body, Mechanical Adjustment Elements, and Connection Interfaces designed for integration with compatible Bone Fixation Elements.
The T-Head Configuration provides a distinctive geometry at one end of the Fixator and may be used to arrange compatible Bone Fixation Elements according to the surgical plan and fixation system design, while the main axial section functions as the Structural Body of the External Fixation Construct.
According to the provided table, the product family is listed under:
Cat. No.: AMS 604.006
and is available in three configurations:
Short – Medium – Long
Each variant carries an individual Cat. No. and GTIN Number, supporting Device Identification, Surgical Set Preparation, Product Traceability, Procurement, Inventory Management, and Stock Control.
Final configuration selection depends on Adult Tibial Anatomy, Fracture Location, Bone Segment Position, Pin Placement, External Fixator Geometry, and the requirements of the surgical case.
Product Description
A Dynamic Axial External Fixator is an external fixation device positioned outside the body and connected to the bone through compatible Fixation Elements such as Schanz Pins / Screws according to the fixation system design.
For this product, the general construct can be represented as follows:
Tibia → Bone Fixation Elements → Movable T-Head → AMFEX Axial Fixator Body → Opposite Fixation Head / Interface
The term:
Dynamic Axial
refers to an Axial Fixator Design incorporating a Mechanical Configuration intended for dynamic movement or adjustment according to the system design.
The term:
Movable T-Head
refers to a Head Component with a T-Shaped Geometry designed to allow positioning within the limits of the fixation system.
The provided data do not specify the actual movement range, T-Head angle, or Dynamization Range.
Product Components and Design
- Central Fixator Body
The main central body of the device, functioning as the Structural Core of the External Fixator.
- Movable T-Head
One of the primary design features of the product, appearing as a T-Shaped Head Component at one end of the device.
It functions as an interface for arranging and connecting compatible Bone Fixation Elements according to the Surgical Construct.
- Opposite Fixation Head / Interface
The opposite end of the device incorporates an additional Connection / Clamp Section to complete attachment of compatible Bone Fixation Elements within the Construct.
- Axial Adjustment Mechanism
The device features a Mechanical Adjustment Assembly along its longitudinal axis, consistent with its designation as a Dynamic Axial Fixator.
The provided table does not specify precise values for:
- Adjustment Range
- Axial Travel
- Compression Range
- Distraction Range
- Dynamization Range
These parameters should therefore not be stated without reference to the official Technical Datasheet or Surgical Technique.
- Fixation Element Interfaces
The terminal sections incorporate interfaces intended for connection with compatible Schanz Pins or Bone Fixation Elements.
- Configuration Options
The product is available in:
- Short
- Medium
- Long
providing multiple Device Configurations during selection of the appropriate system for the clinical case.
Product Use
According to its product designation, AMFEX Dynamic Axial Movable T-Head External Fixator is intended for compatible Adult Tibial External Fixation applications.
Depending on the officially approved indications of the system, it may be incorporated into:
- Tibial External Fixation
- External Fracture Stabilization
- Bone Segment Stabilization
- Temporary Skeletal Stabilization
- Definitive External Fixation when included within the approved indications
- Orthopedic Reconstruction Procedures
- External Fixation Constructs utilizing T-Head Geometry according to the system design
Selection of the appropriate Short, Medium, or Long configuration depends on:
- Adult Tibial Anatomy
- Fracture Level
- Bone Segment Geometry
- Pin / Schanz Screw Position
- Required Fixator Length
- T-Head Positioning
- Soft-Tissue Considerations
- Preoperative Planning
- Intraoperative Assessment
The system should be selected and applied by a Qualified Orthopedic Surgeon in accordance with the official IFU and Surgical Technique.
Key Benefits
Adult Tibia Application
According to the product designation, the system is intended for:
Adult Tibial External Fixation
Dynamic Axial Configuration
Provides an Axial External Fixator Design within a compatible external fixation system.
Movable T-Head Design
Features a Movable T-Head Geometry that provides an additional configuration for arranging fixation components at one end of the device.
Three Configuration Options
Available in:
Short | Medium | Long
providing different options during Device Selection.
Integrated Fixator Structure
The system combines:
- Central Fixator Body
- T-Head Component
- Opposite Fixation Interface
- Axial Mechanical Adjustment Features
within a single External Fixation Assembly.
Individual Product Coding
Each configuration has an individual Cat. No., supporting:
- Product Identification
- Surgical Set Preparation
- Procurement
- Inventory Management
GTIN Traceability
Each variant carries an individual GTIN Number to support:
- Product Traceability
- Inventory Tracking
- Stock Control
- Supply Chain Management
Technical Specifications
| Size / Configuration | Cat. No. | GTIN No. |
| Short | AMS 604.006.001 | 6221361013131 |
| Medium | AMS 604.006.002 | 6221361013148 |
| Long | AMS 604.006.003 | 6221361013155 |
Technical Overview
Product Name: AMFEX Dynamic Axial Movable T-Head External Fixator for Tibia in Adult
Product Type: Dynamic Axial T-Head External Fixator
Product Category: Orthopedic External Fixation System
Patient Category: Adult
Anatomical Application: Tibia
Design: Dynamic Axial with Movable T-Head
General Cat. No.: AMS 604.006
Available Configurations: Short / Medium / Long
Number of Configurations: 3
Functional Role: External Skeletal Stabilization according to approved indications
Identification: Individual Cat. No. & GTIN No. for each configuration
Product Features
- Dynamic Axial External Fixator Design.
- Intended for Adult Tibial External Fixation applications.
- Features a Movable T-Head Configuration.
- Incorporates a Central Structural Fixator Body.
- Includes visible Mechanical Axial Adjustment Features within the design.
- Available in 3 Configurations.
- Available options: Short, Medium, and Long.
- Individual Product Code for each variant.
- Supports Preoperative Device Selection.
- Provides multiple options during Intraoperative Construct Assembly.
- Allows different positioning of compatible Bone Fixation Elements according to the T-Head Geometry.
- Designed for integration with compatible Bone Fixation Components.
- General Cat. No.: AMS 604.006.
- Individual GTIN Number for each configuration.
- Supports Product Identification, Traceability, Procurement, and Inventory Management.
Reviews
There are no reviews yet.