The Occipital-Cervical Plate is a titanium spinal fixation implant designed for use as part of a compatible occipito-cervical internal fixation system, providing a structural plate interface between the occipital region and cervical fixation construct according to the approved indications and surgical technique.
The implant features a contoured plate geometry with multiple fixation openings and connection interfaces distributed across the plate body. These fixation points are intended to work with compatible spinal fixation components to create an occipito-cervical stabilization construct according to the patient’s anatomy and the surgical plan.
According to the supplied catalog information, the implant is manufactured from:
Material: Titanium
The product family is listed under:
Cat. No.: AMS 515.001.000
The plate is available in three lengths:
40 mm / 50 mm / 60 mm
This range provides different options for implant selection according to occipito-cervical anatomy, fixation level, required plate coverage, component positioning, and intraoperative requirements.
Each length has a dedicated Cat. No. and GTIN No., supporting accurate implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.
Product Explanation
The Occipital-Cervical Plate is a spinal fixation plate used within compatible stabilization constructs involving the occipital region and cervical spine.
A simplified fixation concept may be represented as:
Occipital Region → Compatible Fixation Components → Occipital-Cervical Plate → Cervical Fixation Construct
The implant provides multiple connection and fixation points to support assembly of the spinal construct according to anatomical and surgical requirements.
Product Components and Design
- Titanium Plate Body
The main structural body of the implant is manufactured from Titanium, according to the supplied product data.
It functions as the central plate component within the occipito-cervical fixation construct.
- Multiple Fixation Openings
The plate incorporates several fixation openings distributed across its geometry.
These openings are intended for compatible fixation components according to the system design.
- Occipital Fixation Interfaces
The superior portion of the plate includes multiple fixation holes positioned within the contoured upper section of the implant.
The exact screw diameters and trajectories are not specified in the supplied data.
- Inferior Connection Interfaces
The lower section of the implant includes additional fixation / connection features that form part of the spinal construct.
- Contoured Plate Geometry
The implant has an anatomically contoured shape rather than a simple straight plate configuration.
The exact curvature radius and contour dimensions are not specified in the catalog image.
- Length-Specific Configurations
The product is available in:
- 40 mm
- 50 mm
- 60 mm
providing three implant length options.
Intended Use
The Occipital-Cervical Plate is intended for use within compatible occipito-cervical spine fixation systems, according to the manufacturer’s approved indications and Instructions for Use.
Potential applications, when included within the approved indications, may include:
- Occipito-cervical stabilization.
- Occipital-to-cervical fixation constructs.
- Upper cervical spine stabilization.
- Spinal reconstruction procedures involving the occipito-cervical region.
- Plate-based internal fixation as part of a compatible spinal construct.
Selection of the appropriate plate depends on factors such as:
- Occipito-cervical anatomy.
- Fixation level.
- Required plate coverage.
- Fixation component positioning.
- Bone quality.
- Construct configuration.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified spine surgeon in accordance with the approved surgical technique and IFU.
Key Benefits
Titanium Material
The product is specified as:
Material: Titanium
according to the supplied catalog.
Occipito-Cervical Fixation Design
The implant is specifically identified as an Occipital-Cervical Plate, supporting compatible fixation constructs involving the occipital and cervical regions.
Multiple Fixation Interfaces
The plate includes several fixation and connection points integrated into its geometry.
Three Length Options
Available lengths include:
40 / 50 / 60 mm
to support different implant selection requirements.
Contoured Plate Geometry
The anatomical plate profile provides a configuration specifically designed for the occipito-cervical region.
Product Traceability
Each length has a dedicated Cat. No. and GTIN No. to support:
- Implant identification.
- Product traceability.
- Surgical set preparation.
- Procurement.
- Inventory management.
- Stock control.
Technical Specifications
| Length | Cat. No. | GTIN No. |
| 40 mm | AMS 515.001.040T | 6221361018983 |
| 50 mm | AMS 515.001.050T | 6221361019010 |
| 60 mm | AMS 515.001.060T | 6221361019041 |
Technical Overview
Product Name: Occipital-Cervical Plate
Material: Titanium
Product Type: Occipito-Cervical Spine Fixation Plate
Product Category: Spinal Internal Fixation Implant
General Cat. No.: AMS 515.001.000
Available Lengths: 40 / 50 / 60 mm
Length Range: 40–60 mm
Number of Configurations: 3
Design: Contoured Multi-Hole Occipital-Cervical Plate
Fixation Concept: Plate-Based Occipito-Cervical Fixation
Anatomical Application: Occipital-Cervical Region
Identification: Individual Cat. No. and GTIN No. for each length
Product Features
- Occipital-Cervical Plate Design.
- Manufactured from Titanium according to the catalog.
- Designed for compatible spinal fixation systems.
- Contoured anatomical plate geometry.
- Multiple fixation / connection interfaces.
- Available in 3 length configurations.
- Lengths: 40, 50, and 60 mm.
- Supports different occipito-cervical construct configurations.
- Provides multiple options for preoperative implant selection.
- Supports intraoperative configuration selection according to anatomy and surgical requirements.
- Individual Cat. No. for each length.
- Individual GTIN No. for each configuration.
- Supports implant identification, product traceability, procurement, and inventory management.
Reviews
There are no reviews yet.