The Lateral Mass Cervical Plate (11 mm) is a titanium spinal fixation implant designed for use as part of a compatible cervical spine internal fixation system, particularly in constructs involving lateral mass fixation according to the approved indications and surgical technique.
The implant features a straight, low-profile multi-hole plate geometry with regularly positioned fixation openings along its length. These holes are designed to accommodate compatible cervical fixation screws and enable the surgeon to construct a plate-and-screw fixation assembly based on the required number of fixation points and targeted cervical levels.
According to the supplied catalog data, the plate is manufactured from:
Material: Titanium
The product family is listed under:
Cat. No.: AMS 514.011.000
The plate is available in configurations ranging from 2 holes to 8 holes, providing 7 different product options. This range allows implant selection according to factors such as cervical anatomy, number of fixation points, targeted vertebral levels, plate coverage, and surgical planning requirements.
Each configuration carries a dedicated Cat. No. and GTIN No., supporting accurate implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.
Product Explanation
The Lateral Mass Cervical Plate is a spinal fixation plate used within a compatible cervical stabilization construct.
A simplified fixation concept can be represented as:
Cervical Vertebrae → Compatible Fixation Screws → Lateral Mass Cervical Plate → Cervical Fixation Construct
The plate provides multiple fixation points distributed along its length, allowing selection of the required hole configuration according to the number of fixation sites included in the surgical construct.
The catalog identifies the product as:
Lateral Mass Cervical Plate (11 mm)
The exact meaning of the 11 mm dimension should be confirmed from the official technical documentation before describing it as plate width, hole spacing, or another dimensional parameter.
Product Components and Design
- Titanium Plate Body
The primary structural component of the implant is manufactured from Titanium, according to the provided data.
The plate body forms the main supporting element of the fixation construct.
- Multiple Fixation Holes
The plate is available with:
- 2 Holes
- 3 Holes
- 4 Holes
- 5 Holes
- 6 Holes
- 7 Holes
- 8 Holes
These openings provide fixation interfaces for compatible screws.
- Straight Plate Geometry
The product has an elongated plate configuration with fixation holes arranged along its longitudinal axis.
This geometry provides multiple fixation positions within a single plate construct.
- Contoured Plate Profile
The supplied product image shows a contoured outer profile around the fixation openings.
The exact curvature, anatomical contour, and bending specifications are not provided in the catalog data.
- Hole-Specific Configurations
Each product variant is defined primarily by the number of holes, with an individual product code assigned to each configuration.
Intended Use
The Lateral Mass Cervical Plate is designed for use within compatible cervical spine fixation systems, according to the manufacturer’s approved indications and Instructions for Use.
Potential applications, where included within the approved indications, may include:
- Cervical spine stabilization.
- Lateral mass fixation constructs.
- Posterior cervical fixation.
- Cervical spinal reconstruction.
- Plate-and-screw fixation.
- Multi-level cervical stabilization constructs.
Selection of the appropriate configuration depends on:
- Cervical anatomy.
- Number of fixation sites.
- Targeted vertebral levels.
- Screw positioning.
- Required plate coverage.
- Bone quality.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified spine surgeon according to the approved surgical technique and IFU.
Key Benefits
Titanium Material
The product is specified as:
Material: Titanium
according to the catalog.
Multiple Hole Configurations
The plate is available in:
2H / 3H / 4H / 5H / 6H / 7H / 8H
providing multiple options for different fixation constructs.
Seven Product Configurations
The family includes:
7 different configurations
within one product range.
Multi-Point Fixation Geometry
The plate provides multiple screw fixation interfaces distributed along its length.
Cervical Construct Flexibility
Different hole counts allow selection according to the required number of fixation points and planned cervical levels.
Product Traceability
Each configuration includes an individual Cat. No. and GTIN No. to support:
- Implant identification.
- Product traceability.
- Surgical set preparation.
- Procurement.
- Inventory management.
- Stock control.
Technical Specifications
| No. of Holes | Cat. No. | GTIN No. |
| 2H | AMS 514.011.002T | 6221361043565 |
| 3H | AMS 514.011.003T | 6221361043572 |
| 4H | AMS 514.011.004T | 6221361043589 |
| 5H | AMS 514.011.005T | 6221361043596 |
| 6H | AMS 514.011.006T | 6221361043602 |
| 7H | AMS 514.011.007T | 6221361043619 |
| 8H | AMS 514.011.008T | 6221361043626 |
Technical Overview
Product Name: Lateral Mass Cervical Plate (11 mm)
Material: Titanium
Product Type: Cervical Spine Fixation Plate
Product Category: Spinal Internal Fixation Implant
General Cat. No.: AMS 514.011.000
Available Configurations: 2H / 3H / 4H / 5H / 6H / 7H / 8H
Number of Configurations: 7
Design: Straight Multi-Hole Cervical Plate
Fixation Concept: Plate-and-Screw Cervical Fixation
Anatomical Application: Cervical Spine
Identification: Individual Cat. No. and GTIN No. for each configuration
Product Features
- Lateral Mass Cervical Plate Design.
- Manufactured from Titanium according to the catalog.
- Intended for compatible cervical spine fixation systems.
- Straight multi-hole plate geometry.
- Available from 2 to 8 holes.
- Total of 7 configurations.
- Provides multiple screw fixation interfaces.
- Supports different multi-point cervical fixation constructs.
- Supports preoperative implant selection.
- Provides multiple intraoperative configuration options.
- Individual Cat. No. for each hole configuration.
- Individual GTIN No. for each variant.
- Supports implant identification, traceability, procurement, and inventory management.
Reviews
There are no reviews yet.