- The Lumbar Cage (PLIF) – PEEK is a spinal interbody implant manufactured from PEEK, designed for use within compatible Posterior Lumbar Interbody Fusion (PLIF) systems according to the manufacturer’s approved indications and surgical technique.
- The implant features a compact interbody cage geometry with a central open structure, textured / serrated vertebral contact surfaces, and additional openings incorporated into the cage body. These design elements allow the implant to function as an interbody component positioned within the lumbar disc space as part of a compatible fusion and stabilization construct.
- According to the supplied catalog information, the material is:
- Material: PEEK
- The product family is listed under:
- Cat. No.: AMS 512.000.025
- The cage is available in nine listed configurations from 7 mm to 15 mm, progressing in 1 mm increments. This range provides multiple options for implant selection according to lumbar anatomy, intervertebral space dimensions, required implant fit, endplate preparation, and intraoperative assessment.
- Each configuration carries a dedicated Cat. No. and GTIN No., supporting accurate implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.
- Product Explanation
- The Lumbar Cage (PLIF) is an interbody spinal implant intended to be positioned within the lumbar intervertebral space during a compatible Posterior Lumbar Interbody Fusion procedure.
- A simplified construct can be represented as:
- Lumbar Vertebral Body → PLIF Cage → Adjacent Vertebral Body → Lumbar Interbody Fusion Construct
- The cage functions as the interbody implant within the prepared disc space and can be incorporated into a broader spinal stabilization construct according to the approved surgical technique.
- The central openings in the cage may accommodate compatible graft material when specified by the manufacturer’s IFU.
- Product Components and Design
- 1. PEEK Cage Body
- The primary structural component is manufactured from PEEK, according to the supplied catalog.
- The cage body forms the main interbody support component.
- 2. Central Open Structure
- The implant includes central openings within the cage geometry.
- These openings form part of the interbody design and may be used for graft placement where permitted by the approved surgical technique.
- 3. Textured / Serrated Contact Surfaces
- The superior and inferior surfaces visibly incorporate a textured or serrated profile.
- These surfaces form the vertebral contact interfaces of the implant.
- The exact tooth geometry and surface specifications are not stated in the supplied data.
- 4. Side Openings / Instrument Interfaces
- The cage includes additional openings on its lateral and end surfaces.
- These may form part of the implantation, handling, or graft-access design; their precise function should be confirmed from the official instrumentation guide.
- 5. Listed Size Configurations
- The product is available in:
- 7 mm
- 8 mm
- 9 mm
- 10 mm
- 11 mm
- 12 mm
- 13 mm
- 14 mm
- 15 mm
- providing nine listed variants.
- Intended Use
- The Lumbar Cage (PLIF) – PEEK is intended for use within compatible lumbar interbody spinal systems, according to the manufacturer’s approved indications and Instructions for Use.
- Potential applications, where included within the approved indications, may include:
- Posterior Lumbar Interbody Fusion (PLIF).
- Lumbar interbody support.
- Lumbar fusion constructs.
- Reconstruction of an appropriate lumbar intervertebral space.
- Interbody stabilization as part of a compatible lumbar spinal construct.
- Selection of the appropriate cage configuration depends on:
- Lumbar anatomy.
- Intervertebral space dimensions.
- Required cage fit.
- Endplate preparation.
- Bone quality.
- Adjacent fixation construct.
- Preoperative planning.
- Intraoperative assessment.
- The implant should be selected and implanted by a qualified spine surgeon according to the approved surgical technique and IFU.
- Key Benefits
- PEEK Material
- The supplied catalog specifies:
- Material: PEEK
- PLIF-Specific Product Family
- The product is identified as a Lumbar Cage (PLIF) for compatible posterior lumbar interbody fusion constructs.
- Nine Size Configurations
- The range includes:
- 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 mm
- providing multiple implant selection options.
- 1 MM Size Progression
- The listed sizes progress in regular:
- 1 mm increments
- from 7 to 15 mm.
- Open Cage Geometry
- The implant includes a central open structure as part of its interbody design.
- Textured Contact Surfaces
- The cage incorporates textured / serrated vertebral contact surfaces visible in the supplied product image.
- Product Traceability
- Each configuration has a dedicated Cat. No. and GTIN No. to support:
- Implant identification.
- Product traceability.
- Surgical set preparation.
- Procurement.
- Inventory management.
- Stock control.
- Technical Specifications
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Technical Overview
- Product Name: Lumbar Cage (PLIF) – PEEK
Material: PEEK
Product Type: Posterior Lumbar Interbody Fusion Cage
Product Category: Spinal Interbody Implant
General Cat. No.: AMS 512.000.025
Listed Configurations: 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 mm
Listed Range: 7–15 mm
Increment: 1 mm
Number of Configurations: 9
Design: Open PEEK Lumbar Cage with Textured Contact Surfaces
Surgical Approach: PLIF
Anatomical Application: Lumbar Spine
Functional Role: Interbody support within a compatible lumbar fusion construct
Identification: Individual Cat. No. and GTIN No. for each configuration - Product Features
- Posterior Lumbar Interbody Fusion Cage Design.
- Manufactured from PEEK according to the catalog.
- Designed for compatible PLIF systems.
- Open interbody cage geometry.
- Textured / serrated superior and inferior contact surfaces.
- Additional lateral / end openings incorporated into the implant geometry.
- Available in 9 configurations.
- Listed range from 7 to 15 mm.
- Regular 1 mm increments.
- Supports multiple implant selection options according to lumbar anatomy and surgical planning.
- Individual Cat. No. for each configuration.
- Individual GTIN No. for each variant.
- Supports implant identification, traceability, procurement, and inventory management.
Reviews
There are no reviews yet.