The Mono Axial Screw (6.5 mm) is a titanium spinal fixation implant designed for integration within compatible posterior spinal instrumentation systems according to the manufacturer’s approved indications and surgical technique.
The implant combines an extended threaded bone-engagement shaft with a proximal monoaxial fixation head. The monoaxial configuration provides a fixed head-to-shaft relationship and is designed to interface with compatible spinal rods and locking components within the corresponding fixation construct.
According to the supplied catalog:
Material: Titanium
General Cat. No.: AMS 502.065.000
Nominal Diameter: 6.5 mm
The screw is available in 12 lengths ranging from 25 mm to 80 mm, providing multiple options according to vertebral anatomy, bone dimensions, required fixation depth, screw trajectory, construct geometry, and intraoperative assessment.
Each configuration carries an individual Cat. No. and GTIN No., supporting implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.
Product Components & Design
The implant consists of a Titanium screw body, an extended threaded shaft for bone engagement, a distal fixation tip, and a proximal monoaxial head designed to receive compatible rod and locking components.
The supplied catalog does not specify the thread pitch, core diameter, thread profile, rod compatibility, locking-cap specifications, or recommended insertion torque.
Intended Use
The Mono Axial Screw (6.5 mm) is intended for use within compatible posterior spinal fixation systems according to the manufacturer’s approved IFU.
Potential applications, where included within the approved indications, may include:
- Posterior spinal stabilization.
- Screw-and-rod fixation constructs.
- Multi-level spinal instrumentation.
- Spinal reconstruction constructs.
- Spinal deformity fixation systems.
- Compatible thoracic or lumbar posterior fixation systems.
Selection of the appropriate screw depends on vertebral anatomy, bone quality, fixation site, required screw depth, trajectory, and construct configuration.
Key Benefits
- Manufactured from Titanium.
- 6.5 mm nominal diameter.
- Fixed-head monoaxial configuration.
- Threaded shaft for mechanical bone engagement.
- 12 available configurations.
- Length range from 25 to 80 mm.
- Regular 5 mm increments.
- Multiple implant options for different fixation depths.
- Individual Cat. No. and GTIN No. for each configuration.
- Supports implant identification, traceability, procurement, and inventory control.
Technical Specifications – 6.5 MM
| Length | Cat. No. | GTIN No. |
| 25 mm | AMS 502.065.025T | 6221361024311 |
| 30 mm | AMS 502.065.030T | 6221361024342 |
| 35 mm | AMS 502.065.035T | 6221361024373 |
| 40 mm | AMS 502.065.040T | 6221361024403 |
| 45 mm | AMS 502.065.045T | 6221361024434 |
| 50 mm | AMS 502.065.050T | 6221361024465 |
| 55 mm | AMS 502.065.055T | 6221361024496 |
| 60 mm | AMS 502.065.060T | 6221361024526 |
| 65 mm | AMS 502.065.065T | 6221361024557 |
| 70 mm | AMS 502.065.070T | 6221361024588 |
| 75 mm | AMS 502.065.075T | 6221361017092 |
| 80 mm | AMS 502.065.080T | 6221361017122 |
Technical Overview
Product Name: Mono Axial Screw (6.5 mm)
Material: Titanium
Product Type: Monoaxial Spinal Fixation Screw
Product Category: Posterior Spinal Internal Fixation Implant
General Cat. No.: AMS 502.065.000
Nominal Diameter: 6.5 mm
Available Lengths: 25–80 mm
Length Increment: 5 mm
Number of Configurations: 12
Design: Threaded Screw with Fixed Monoaxial Head
Fixation Concept: Posterior Screw-and-Rod Spinal Fixation
Short Website Product Card Description
Mono Axial Screw (6.5 mm) [Titanium] – A titanium posterior spinal fixation screw featuring a fixed-head monoaxial design and threaded bone-engagement shaft, available in twelve lengths from 25 to 80 mm to support different fixation depths and spinal construct requirements.
Material: Titanium
Diameter: 6.5 MM
Available Lengths: 25–80 MM
General Cat. No.: AMS 502.065.000
Mono Axial Screw (7.0 MM)
Titanium Monoaxial Spinal Fixation Screw | Lengths 25–80 MM | Cat. No. AMS 502.070.000
Short Marketing Description
The Mono Axial Screw (7.0 mm) is a titanium posterior spinal fixation screw featuring a fixed-head monoaxial design and threaded bone-engagement shaft, available in twelve lengths from 25 to 80 mm for different anatomical, fixation-depth, and construct requirements.
- Manufactured from Titanium according to the supplied catalog data.
- 7.0 mm Monoaxial Screw Design for compatible posterior spinal fixation systems.
- Available in 12 lengths from 25 to 80 mm, in regular 5 mm increments.
- Each configuration has an individual Cat. No. and GTIN No. for implant identification and traceability.
Long Product Description
The Mono Axial Screw (7.0 mm) is a titanium spinal fixation implant designed for use within compatible posterior spinal stabilization systems.
The implant features an extended threaded shaft for mechanical bone engagement combined with a proximal monoaxial head that maintains a fixed orientation relative to the screw shaft. The head is designed to integrate with compatible spinal rods and locking components according to the relevant fixation system.
According to the supplied catalog:
Material: Titanium
General Cat. No.: AMS 502.070.000
Nominal Diameter: 7.0 mm
The product is available in 12 lengths from 25 mm to 80 mm, providing a broad selection according to vertebral anatomy, bone dimensions, required fixation depth, screw trajectory, and planned construct geometry.
Each length has a dedicated Cat. No. and GTIN No. to support implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.
Product Components & Design
The screw consists of:
- Titanium implant body.
- 7.0 mm nominal screw configuration.
- Threaded bone-engagement shaft.
- Distal fixation tip.
- Fixed-orientation monoaxial head.
- Interface for compatible spinal fixation components.
Intended Use
The Mono Axial Screw (7.0 mm) is intended for compatible posterior spinal fixation systems according to the approved indications and IFU.
Potential applications, where approved, may include posterior spinal stabilization, screw-and-rod constructs, multi-level instrumentation, spinal reconstruction, and deformity fixation systems.
Key Benefits
- Manufactured from Titanium.
- 7.0 mm nominal diameter.
- Fixed-head monoaxial design.
- Threaded shaft for bone engagement.
- 12 available configurations.
- Length range: 25–80 mm.
- Regular 5 mm increments.
- Multiple options for screw-length selection.
- Individual Cat. No. and GTIN No. for every configuration.
- Supports implant traceability and inventory management.
Technical Specifications – 7.0 MM
| Length | Cat. No. | GTIN No. |
| 25 mm | AMS 502.070.025T | 6221361017153 |
| 30 mm | AMS 502.070.030T | 6221361017184 |
| 35 mm | AMS 502.070.035T | 6221361017214 |
| 40 mm | AMS 502.070.040T | 6221361017245 |
| 45 mm | AMS 502.070.045T | 6221361017276 |
| 50 mm | AMS 502.070.050T | 6221361017306 |
| 55 mm | AMS 502.070.055T | 6221361017337 |
| 60 mm | AMS 502.070.060T | 6221361017368 |
| 65 mm | AMS 502.070.065T | 6221361017399 |
| 70 mm | AMS 502.070.070T | 6221361017429 |
| 75 mm | AMS 502.070.075T | 6221361017450 |
| 80 mm | AMS 502.070.080T | 6221361017481 |
Technical Overview – 7.0 MM
Product Name: Mono Axial Screw (7.0 mm)
Material: Titanium
Product Type: Monoaxial Spinal Fixation Screw
Product Category: Posterior Spinal Internal Fixation Implant
General Cat. No.: AMS 502.070.000
Nominal Diameter: 7.0 mm
Available Lengths: 25–80 mm
Length Increment: 5 mm
Number of Configurations: 12
Design: Threaded Screw with Fixed Monoaxial Head
Fixation Concept: Posterior Screw-and-Rod Spinal Fixation
Reviews
There are no reviews yet.