Pira Mesh (120 MM)

The Pira Mesh (120 mm) is a titanium spinal reconstruction implant designed for integration within compatible spinal reconstruction and stabilization systems according to the manufacturer’s approved indications, Surgical Technique, and Instructions for Use.

The implant features an elongated open lattice / perforated mesh geometry with multiple regularly distributed apertures throughout its structure. This configuration provides a dedicated structural component that can be incorporated into compatible vertebral or spinal reconstruction constructs while offering an extensive selection of implant lengths.

According to the supplied catalog:

Material: Titanium
General Cat. No.: AMS 518.120.000
Product Designation: Pira Mesh (120 mm)

The supplied product family includes 38 configurations ranging from 12 mm to 86 mm, progressing in regular 2 mm increments. This broad dimensional range allows implant selection according to factors such as spinal anatomy, vertebral defect dimensions, reconstruction level, required implant length, adjacent vertebral geometry, and intraoperative assessment.

Each configuration carries a dedicated Cat. No. and GTIN No., supporting accurate implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.

Product Explanation

The Pira Mesh is a titanium mesh-type implant designed to serve as a structural component within a compatible spinal reconstruction construct.

A simplified reconstruction concept can be represented as:

Vertebral Reconstruction Site → Pira Mesh → Compatible Supplemental Fixation → Spinal Reconstruction Construct

The perforated mesh body provides the implant’s primary structural geometry, while the large number of apertures distributed throughout the implant form its characteristic open reconstruction structure.

Where specifically permitted by the manufacturer’s approved technique, mesh-type spinal implants may be used with compatible graft material and supplemental spinal fixation components.

Product Components and Design

1. Titanium Mesh Body

The principal implant structure is manufactured from Titanium, according to the supplied catalog.

2. Open Perforated / Lattice Structure

The implant incorporates multiple openings distributed throughout its body, creating a characteristic open mesh geometry.

The supplied catalog does not specify:

• Aperture diameter
• Aperture spacing
• Mesh wall thickness
• Open-area percentage
• Structural strand dimensions

3. Elongated Reconstruction Profile

The product features an elongated geometry suited to multiple listed implant lengths.

4. Tubular-Type Mesh Configuration

The supplied product image shows a tubular / channel-like mesh profile with repeated openings distributed along its structure.

The exact transverse dimensions are not provided.

5. End Geometry

The terminal sections incorporate open features forming part of the overall mesh structure.

Their precise function, trimming characteristics, and preparation requirements are not specified in the supplied data.

6. Extensive Length Range

The catalog lists configurations from:

12 mm to 86 mm

in regular:

2 mm increments

providing 38 individual variants.

Intended Use

The Pira Mesh (120 mm) is intended for use within compatible spinal reconstruction systems according to the manufacturer’s approved indications and Instructions for Use.

Potential applications, where included within the approved indications, may include:

• Spinal reconstruction constructs.
• Vertebral column reconstruction.
• Reconstruction of appropriate vertebral defects.
• Vertebral body reconstruction where specifically approved.
• Integration with compatible spinal stabilization components.
• Use with supplemental fixation systems according to the approved technique.

Selection of the appropriate configuration depends on:

• Spinal anatomy.
• Reconstruction level.
• Vertebral defect dimensions.
• Required reconstruction length.
• Adjacent vertebral geometry.
• Bone quality.
• Vertebral contact requirements.
• Supplemental fixation strategy.
• Preoperative planning.
• Intraoperative assessment.

The implant should be selected and implanted by a qualified spine surgeon according to the manufacturer’s approved Surgical Technique and IFU.

Key Benefits

Titanium Material

The supplied catalog specifies:

Material: Titanium

Open Mesh Geometry

The implant features a perforated lattice / mesh structure with multiple openings throughout the implant body.

Extensive Length Selection

The listed product range extends from:

12 mm to 86 mm

providing numerous options for reconstruction planning.

Fine 2 MM Progression

The available configurations progress in regular:

2 mm increments

for relatively precise dimensional selection.

38 Product Configurations

The supplied catalog contains:

38 individual length variants

within the product family.

Reconstruction-Oriented Design

The elongated open mesh geometry provides a structural implant option for compatible spinal reconstruction systems.

Product Traceability

Each configuration has an individual Cat. No. and GTIN No. to support:

• Implant identification
• Product traceability
• Surgical set preparation
• Procurement
• Inventory management
• Stock control

Technical Specifications

Length	Cat. No.	GTIN No.
12 mm	AMS 518.120.012T	6221361021860
14 mm	AMS 518.120.014T	6221361021891
16 mm	AMS 518.120.016T	6221361021921
18 mm	AMS 518.120.018T	6221361021952
20 mm	AMS 518.120.020T	6221361021983
22 mm	AMS 518.120.022T	6221361022010
24 mm	AMS 518.120.024T	6221361022041
26 mm	AMS 518.120.026T	6221361022072
28 mm	AMS 518.120.028T	6221361022102
30 mm	AMS 518.120.030T	6221361022133
32 mm	AMS 518.120.032T	6221361022164
34 mm	AMS 518.120.034T	6221361022195
36 mm	AMS 518.120.036T	6221361022225
38 mm	AMS 518.120.038T	6221361022256
40 mm	AMS 518.120.040T	6221361022287
42 mm	AMS 518.120.042T	6221361022317
44 mm	AMS 518.120.044T	6221361022348
46 mm	AMS 518.120.046T	6221361022379
48 mm	AMS 518.120.048T	6221361022409
50 mm	AMS 518.120.050T	6221361022423
52 mm	AMS 518.120.052T	6221361022447
54 mm	AMS 518.120.054T	6221361022461
56 mm	AMS 518.120.056T	6221361022485
58 mm	AMS 518.120.058T	6221361022508
60 mm	AMS 518.120.060T	6221361022522
62 mm	AMS 518.120.062T	6221361022546
64 mm	AMS 518.120.064T	6221361022560
66 mm	AMS 518.120.066T	6221361022584
68 mm	AMS 518.120.068T	6221361022607
70 mm	AMS 518.120.070T	6221361022621
72 mm	AMS 518.120.072T	6221361022645
74 mm	AMS 518.120.074T	6221361022669
76 mm	AMS 518.120.076T	6221361022683
78 mm	AMS 518.120.078T	6221361022706
80 mm	AMS 518.120.080T	6221361022737
82 mm	AMS 518.120.082T	6221361022768
84 mm	AMS 518.120.084T	6221361022799
86 mm	AMS 518.120.086T	6221361022829

Technical Overview

Product Name: Pira Mesh (120 mm)
Material: Titanium
Product Type: Spinal Reconstruction Mesh
Product Category: Spinal Reconstruction Implant
General Cat. No.: AMS 518.120.000
Nominal Product Designation: 120 mm
Listed Lengths: 12–86 mm
Length Increment: 2 mm
Number of Configurations: 38
Design: Elongated Open Perforated / Lattice Mesh
Functional Role: Structural component within compatible spinal reconstruction constructs
Anatomical Application: Spine
Identification: Individual Cat. No. and GTIN No. for each listed configuration

Product Features

• Pira Mesh Spinal Reconstruction Design.
• Manufactured from Titanium according to the catalog.
• Open perforated / lattice geometry.
• Multiple apertures distributed throughout the mesh body.
• Elongated tubular-type reconstruction configuration.
• Catalog designation: Pira Mesh (120 mm).
• Available in 38 listed length configurations.
• Length range from 12 to 86 mm.
• Regular 2 mm increments.
• Provides extensive dimensional options for reconstruction planning.
• Designed for integration with compatible spinal reconstruction components.
• Individual Cat. No. for every listed length.
• Individual GTIN No. for every configuration.
• Supports implant identification, traceability, procurement, and inventory management.