The Push-Lock Anchor is intended to be used as part of a compatible orthopedic fixation system according to the approved indications, surgical technique, and Instructions for Use. The exact anatomical application, compatible implants, fixation method, deployment technique, and instrumentation should be confirmed from the official technical documentation.
The product is shown as a compact push-lock anchor associated with an insertion shaft and a proximal cross/driver-like end. The supplied product table identifies both configurations as having a 2.7 mm diameter. The exact difference between the two configurations is not defined in the supplied image and should not be inferred solely from the Cat. No. suffixes.
According to the provided product information, the product is identified as:
Product Name: Push-Lock Anchor
The product is available in the following identified configuration category:
Diameter: 2.7 mm
Each configuration is assigned an individual Cat. No. and GTIN No., supporting accurate implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.
Product Explanation
The Push-Lock Anchor is an orthopedic fixation component used within a compatible fixation construct. Its push-lock design is identified by the product name; the specific locking mechanism and deployment process are not defined in the supplied image and should be confirmed from the official product documentation.
A simplified fixation concept can be represented as:
Compatible Bone / Soft-Tissue Structure → Push-Lock Anchor → Orthopedic Fixation Construct
Anchor selection and use are determined according to the applicable anatomy, tissue and bone conditions, fixation requirements, compatible instrumentation, and approved surgical plan.
Product Components and Design
- Push-Lock Anchor Body
The supplied image shows a compact anchor body associated with an insertion shaft. The material, material grade, dimensions, and mechanical specifications are not specified in the product image and should be confirmed from the official technical documentation.
- Push-Lock Fixation Concept
The product is identified as a Push-Lock Anchor. The exact locking mechanism, deployment sequence, fixation interface, and release or insertion requirements are not defined in the supplied product table.
- Insertion Shaft and Proximal Interface
The product illustrations show anchor components connected to insertion shafts with proximal cross/driver-like ends. The exact delivery system, insertion interface, driver compatibility, and surgical instrumentation should be confirmed from the official surgical technique and Instructions for Use.
- Diameter-Specific Configuration
Both configurations listed in the supplied table have a diameter of:
2.7 mm
- Configuration-Specific Identification
The two configurations are individually identified as follows:
- AMS 530.000.001P with GTIN No. 6221361042957.
- AMS 530.000.001T with GTIN No. 6221361013087.
The specific technical distinction represented by the Cat. No. suffixes is not defined in the supplied image.
Intended Use
The Push-Lock Anchor is designed for use within a compatible orthopedic fixation system according to the approved indications, surgical technique, and Instructions for Use.
The supplied image alone does not define the complete clinical indication, patient population, anatomical application, associated implants, suture requirements, or surgical procedure. These details should be confirmed from the official product documentation and applicable regulatory information.
Product selection and use depend on factors including:
- Anatomical location.
- Bone or soft-tissue condition.
- Surgical indication.
- Required fixation method.
- Anchor diameter.
- Required insertion depth and preparation.
- Compatible implant and instrumentation selection.
- Bone quality and anatomical conditions.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and used by a qualified orthopedic surgeon in accordance with the approved surgical technique and Instructions for Use.
Key Features
Push-Lock Anchor Design
The product is identified as a Push-Lock Anchor and is shown as a compact anchor component associated with an insertion shaft and a proximal cross/driver-like interface.
2.7 mm Diameter
Both listed configurations have a specified diameter of:
2.7 mm
Insertion and Driver Interface
The product illustrations show insertion shafts and proximal cross/driver-like ends. The precise insertion interface, compatible driver, and deployment requirements should be confirmed from the official product documentation.
Two Identified Configurations
The supplied product table contains two configurations with separate Cat. No. and GTIN No. assignments. The exact technical difference between the configurations is not stated in the image.
Product Traceability
Each configuration has an individual Cat. No. and GTIN No. to support implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.
Technical Specifications
| Diameter | Cat. No. | GTIN No. |
| 2.7 mm | AMS 530.000.001P | 6221361042957 |
| 2.7 mm | AMS 530.000.001T | 6221361013087 |
Technical Overview
Product Name: Push-Lock Anchor
Product Type: Orthopedic Fixation Implant
Product Category: Push-Lock Anchor
Diameter: 2.7 mm
Number of Identified Configurations: 2
Visible Design: Compact anchor with insertion shaft and proximal cross/driver-like end
Material: Not specified in the supplied image
Length: Not specified in the supplied image
Suture Specifications: Not specified in the supplied image
Locking Mechanism: Not specified in the supplied image
Anatomical Application: Not specified in the supplied image; confirm the approved indication from official documentation
Identification: Individual Cat. No. and GTIN No. for each configuration
Product Features
- Push-Lock Anchor orthopedic fixation implant design.
- 7 mm diameter configuration.
- Compact anchor body associated with an insertion shaft.
- Proximal cross/driver-like interface shown in the product illustrations.
- Two identified product configurations.
- Individual Cat. No. for each configuration.
- Individual GTIN No. for each configuration.
- Designed for use with a compatible orthopedic fixation system.
- Supports implant identification, traceability, procurement, and inventory management.
- Material, length, detailed dimensions, locking mechanism, clinical indication, and compatible instrumentation to be confirmed from official technical documentation.
Reviews
There are no reviews yet.