The Proximal Femoral Nail (PFN) is intended to be used as part of a compatible orthopedic internal fixation system according to the approved indications, surgical technique, and Instructions for Use. The exact anatomical applications, fracture indications, compatible screws, instrumentation, and surgical approach should be confirmed from the official technical documentation.
The product is shown as a proximal femoral intramedullary nail with associated proximal fixation components and distal interlocking features. Both material variants have a 10 mm diameter and are available in lengths from 220 mm to 260 mm. Selection of nail length, diameter, material variant, and associated fixation components should be performed according to the applicable anatomy, fracture characteristics, bone dimensions, patient requirements, and approved surgical plan.
According to the provided product information, the product family is identified as:
Product Name: Proximal Femoral Nail (PFN)
The product family has the following specifications shown in the image:
Diameter: 10 mm
Material Variants: TIT and Stainless Steel (316L)
Available Lengths: 220 mm, 240 mm, and 260 mm
Length Increment: 20 mm
Number of Configurations: 3 per material variant; 6 total identified entries
The material notation TIT is reproduced exactly as shown in the supplied image. Its expanded material designation and applicable material standard should be confirmed from the official technical documentation.
Each length and material variant is assigned an individual Cat. No. and GTIN No., supporting accurate implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.
Product Explanation
The Proximal Femoral Nail (PFN) is an orthopedic intramedullary fixation implant used within a compatible proximal femoral fracture fixation construct. It is positioned within the femoral medullary canal and used with compatible proximal and distal fixation components according to the approved surgical technique and product documentation.
A simplified fixation concept can be represented as:
Proximal Femoral Fracture / Prepared Femoral Canal → PFN → Compatible Proximal and Distal Fixation Components → Internal Fixation Construct
Nail diameter and length are selected according to the patient’s anatomy, femoral canal dimensions, fracture location and pattern, required fixation levels, bone quality, and the surgical plan. Material selection should be made according to the applicable product documentation and clinical requirements.
Product Components and Design
- Intramedullary Nail Body
The supplied image shows proximal femoral intramedullary nail components intended for placement within a compatible femoral bone canal. Both variants are identified with a 10 mm diameter. The detailed cross-sectional geometry, curvature, wall thickness, and mechanical specifications are not defined in the supplied image.
- Proximal Fixation Components
The product illustrations show associated proximal fixation components for the proximal femoral region. The exact number, position, dimensions, orientation, and compatibility of these components should be confirmed from the official technical documentation.
- Distal Interlocking Features
The illustrations also show distal fixation features associated with the nail. The precise locking configuration, screw specifications, targeting method, and instrumentation are not specified in the supplied image.
- Material Variants
The supplied image identifies two material variants:
- TIT, reproduced as shown in the image. The expanded designation should be confirmed from official documentation.
- Stainless Steel (316L).
The material variant must be matched with the applicable Cat. No., GTIN No., surgical set, and product documentation.
- Diameter Configuration
Both material variants are identified with a diameter of:
10 mm
- Length-Specific Configurations
Each material variant is available in three length options:
220 / 240 / 260 mm
The listed lengths increase in regular 20 mm increments.
Intended Use
The Proximal Femoral Nail (PFN) is designed for use within a compatible orthopedic proximal femoral internal fixation system according to the approved indications, surgical technique, and Instructions for Use.
The supplied image alone does not define the complete clinical indication, fracture classification, patient population, associated screws, surgical approach, contraindications, or material-selection criteria. These details should be confirmed from the official product documentation and applicable regulatory information.
Nail selection and use depend on factors including:
- Proximal femoral anatomy.
- Femoral canal dimensions.
- Fracture location and pattern.
- Required nail diameter.
- Required nail length.
- Proximal and distal fixation requirements.
- Material compatibility and applicable product requirements.
- Bone quality.
- Compatible screws and instrumentation.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified orthopedic surgeon in accordance with the approved surgical technique and Instructions for Use.
Key Features
10 mm Nail Diameter
Both material variants are identified with a diameter of:
10 mm
Two Material Variants
The supplied image presents two variants:
- TIT, as written in the image.
- Stainless Steel (316L).
The expanded material designation for TIT should be confirmed from official technical documentation.
Three Length Configurations
Each material variant is available in:
220 mm, 240 mm, and 260 mm
with regular 20 mm increments.
Proximal Femoral Nail Design
The product is identified as a Proximal Femoral Nail (PFN) and is shown with associated proximal fixation and distal interlocking components in the supplied illustrations.
Six Identified Product Entries
The image presents three length configurations for each of two material variants, resulting in:
6 identified length-and-material entries
Product Traceability
Each length and material variant has an individual Cat. No. and GTIN No. to support implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.
Technical Specifications — TIT Variant
| Material | Diameter | Length | Cat. No. | GTIN No. |
| TIT | 10 mm | 220 mm | AMS 810.010.022T | 6221361000704 |
| TIT | 10 mm | 240 mm | AMS 810.010.024T | 6221361000728 |
| TIT | 10 mm | 260 mm | AMS 810.010.026T | 6221361000742 |
Technical Specifications — Stainless Steel (316L) Variant
| Material | Diameter | Length | Cat. No. | GTIN No. |
| Stainless Steel (316L) | 10 mm | 220 mm | AMS 810.010.022S | 6221361000513 |
| Stainless Steel (316L) | 10 mm | 240 mm | AMS 810.010.024S | 6221361000537 |
| Stainless Steel (316L) | 10 mm | 260 mm | AMS 810.010.026S | 6221361000551 |
Variant Comparison
| Specification | TIT Variant | Stainless Steel Variant |
| Diameter | 10 mm | 10 mm |
| Available lengths | 220–260 mm | 220–260 mm |
| Listed lengths | 220, 240, and 260 mm | 220, 240, and 260 mm |
| Length increment | 20 mm | 20 mm |
| Number of configurations | 3 | 3 |
| Cat. No. suffix shown | T | S |
| GTIN assignment | Individual GTIN for each length | Individual GTIN for each length |
The table above summarizes only the information visible in the supplied image. The Cat. No. suffixes and material notation are reported as shown and should be confirmed against the official product documentation.
Technical Overview
Product Name: Proximal Femoral Nail (PFN)
Product Type: Intramedullary Orthopedic Fixation Implant
Product Category: Proximal Femoral Nail
Diameter: 10 mm
Material Variants: TIT and Stainless Steel (316L)
Available Lengths: 220 mm, 240 mm, and 260 mm
Length Increment: 20 mm
Number of Configurations: 3 per material variant; 6 total identified entries
Design: Proximal Femoral Intramedullary Nail
Fixation Concept: Intramedullary Nail with Proximal and Distal Fixation Components
Anatomical Application: Compatible proximal femoral fixation procedures; confirm the specific application from official documentation
Identification: Individual Cat. No. and GTIN No. for each length-and-material configuration
Product Features
- Proximal Femoral Nail (PFN) design.
- 10 mm diameter for both displayed material variants.
- TIT material notation shown for one variant.
- Stainless Steel (316L) identified for the second variant.
- Intramedullary proximal femoral fixation concept.
- Proximal fixation components and distal interlocking features shown in the product illustrations.
- Available in three lengths per material variant.
- Length range from 220 mm to 260 mm.
- Regular 20 mm length increments.
- Six identified length-and-material entries in total.
- Supports implant selection according to anatomy and fracture requirements.
- Individual Cat. No. for each length and material variant.
- Individual GTIN No. for each configuration.
- Supports implant identification, traceability, procurement, and inventory management.
Reviews
There are no reviews yet.