Product Explanation
The Locking T Distal Radius Plate 2.4/2.7 mm is an orthopedic fixation plate intended to form part of a compatible internal fixation construct in the distal radius region.
A simplified fixation concept can be represented as:
Distal Radius → T-Shaped Locking Plate → Compatible Fixation Screws → Internal Fixation Construct
The plate is selected and positioned according to the applicable anatomy, fracture configuration, fixation requirements, surgical plan, approved surgical technique, and Instructions for Use.
According to the supplied product information, the product has:
T-Straight Alignment
with:
3 Head Holes
and two shaft options:
3 / 4 Shaft Holes
Product Components and Design
- T-Shaped Plate Body
The implant consists of an elongated metallic shaft combined with a widened transverse head, producing a T-shaped plate geometry.
The exact anatomical contour, plate curvature, dimensions, thickness, and plate-to-bone relationship are not specified in the supplied product image and should be confirmed from the official technical drawings.
- Distal Head Section
The transverse head section incorporates:
3 Head Holes
according to the supplied product data.
These openings provide fixation positions within the widened head section.
The exact compatible screw type, diameter, locking interface, and screw trajectory are not specified in the supplied image.
- Shaft Section
The elongated shaft is available with:
3 Shaft Holes
or
4 Shaft Holes
providing two alternative plate configurations.
The exact plate length corresponding to each configuration is not supplied.
- Multiple Fixation Openings
The supplied image visually shows several openings distributed along the plate.
These include circular and elongated opening geometries.
Their exact technical function—such as locking fixation, compression, plate positioning, or another fixation function—is not defined in the supplied data and should be confirmed from the approved surgical technique.
- T-Straight Alignment
According to the supplied product data:
Alignment: T-Straight
No separate Left or Right configuration is identified for this product.
The exact anatomical positioning of the T-Straight configuration should be confirmed from the official surgical technique.
- Material Options
The product is available in:
SS316L
and
Titanium
according to the supplied product image.
The specific Titanium alloy or grade is not defined and should be confirmed from the official material specification.
Intended Use
The Locking T Distal Radius Plate 2.4/2.7 mm is designed for use within a compatible orthopedic fixation system involving the distal radius, according to the approved indications, surgical technique, and Instructions for Use.
Potential applications may involve internal fixation procedures in the distal radius region where a T-shaped locking plate is included within the manufacturer’s approved indications.
The exact fracture types, anatomical indications, contraindications, surgical approach, screw configuration, and patient selection criteria should be confirmed from the official product documentation.
Implant selection may depend on factors including:
- Distal radius anatomy.
- Fracture location and configuration.
- Required fixation construct.
- Required shaft-hole configuration.
- Bone dimensions.
- Bone quality.
- Plate geometry requirement.
- Compatible screw selection.
- Compatible instrumentation.
- Surgical approach.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified orthopedic surgeon according to the approved surgical technique and Instructions for Use.
Key Benefits
T-Shaped Plate Configuration
The product features a:
T-Shaped Plate Design
with a widened transverse head and elongated shaft.
This provides a distinct plate configuration within the distal radius fixation system.
Three Head Fixation Positions
The supplied product data identifies:
3 Head Holes
within the transverse head section.
Two Shaft Configurations
The product is available with:
3 Shaft Holes
and
4 Shaft Holes
allowing selection between two plate configurations.
Two Material Options
The plate is available in:
SS316L
and
Titanium
according to the supplied product data.
2.4/2.7 mm System
The product is identified as:
Locking T Distal Radius Plate 2.4/2.7 mm
indicating its association with a compatible 2.4/2.7 mm orthopedic fixation system.
The exact screw size associated with each opening should be confirmed from the manufacturer’s official documentation.
T-Straight Configuration
The product is identified as:
T-Straight
rather than as a Left or Right anatomical configuration.
This provides a distinct alignment within the plate family.
Multiple Basic Configurations
Based on the information visible in the supplied image, the product family contains:
- 1 alignment: T-Straight
- 1 head-hole configuration: 3
- 2 shaft-hole options: 3 / 4
- 2 material options: SS316L / Titanium
This represents up to 4 basic shaft × material combinations, assuming each shaft option is available in both listed materials.
The exact number of commercial variants should be confirmed from the official Cat. No. table.
Technical Specifications
| Specification | Product Data |
| Product Name | Locking T Distal Radius Plate 2.4/2.7 mm |
| Product Category | Trauma – Radius |
| Product Type | Locking Orthopedic Fixation Plate |
| Plate Configuration | T-shaped |
| Anatomical Region | Distal Radius |
| System Size | 2.4/2.7 mm |
| Alignment | T-Straight |
| Head Holes | 3 |
| Shaft Hole Options | 3, 4 |
| Materials | SS316L, Titanium |
| Potential Basic Configurations | Up to 4, subject to catalog confirmation |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
| Plate Length | Not provided |
| Plate Width | Not provided |
| Plate Thickness | Not provided |
| Compatible Screw Details | Not provided |
| Titanium Grade | Not provided |
| Compatible Instrumentation | Not provided |
Technical Overview
Product Name: Locking T Distal Radius Plate 2.4/2.7 mm
Product Category: Trauma – Radius
Product Type: Locking Orthopedic Fixation Plate
Plate Type: T-shaped
Anatomical Region: Distal Radius
System: 2.4/2.7 mm
Alignment: T-Straight
Head Holes: 3
Shaft Hole Options: 3 and 4
Material Options: SS316L and Titanium
Plate Geometry: T-shaped transverse head with elongated shaft
Fixation Concept: Plate-and-screw internal fixation using a compatible orthopedic fixation system
Side-Specific Design: Not specified
Cat. No.: Not supplied
GTIN No.: Not supplied
Specific Titanium Grade: Not supplied
Plate Dimensions: Not supplied
Specific Screw Compatibility: Not supplied
Product Features
- Locking distal radius plate design.
- T-shaped plate configuration.
- T-Straight alignment.
- Designed for use within a compatible distal radius fixation system.
- Associated with a 2.4/2.7 mm fixation system according to the supplied product name.
- Incorporates 3 head holes.
- Available with 3 shaft holes.
- Available with 4 shaft holes.
- Available in SS316L.
- Available in Titanium.
- Features a widened transverse head section.
- Features an elongated shaft section.
- Includes multiple fixation openings.
- Includes circular openings visible in the product image.
- Includes elongated openings visible in the product image.
- Supports two shaft-hole configurations.
- Supports multiple material configurations.
- Exact screw compatibility should be confirmed from official technical documentation.
- Exact plate dimensions and thickness should be confirmed from the manufacturer’s technical drawings.
- Individual Cat. No. and GTIN No. should be added when the official catalog table is available.
- Approved indications, contraindications, and surgical technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.