Product Explanation
The Locking Bone Compression Plate, Small 3.5 mm is an orthopedic fixation plate intended to form part of a compatible internal fixation construct.
A simplified fixation concept can be represented as:
Prepared Bone → Locking Bone Compression Plate → Compatible Fixation Screws → Internal Fixation Construct
The product is specifically identified as a:
Bone Compression Plate
with a:
Small
configuration.
According to the supplied product information, the plate family is available with:
2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 12 / 14 Shaft Holes
providing a broad range of plate configurations.
The precise anatomical region and approved clinical applications are not stated in the supplied image and should therefore be confirmed from the manufacturer’s official documentation.
Product Components and Design
- Elongated Compression Plate Body
The implant consists of an elongated metallic plate body with fixation openings distributed along its longitudinal axis.
The supplied image shows a relatively narrow, straight plate profile.
The exact plate length, width, thickness, curvature, and anatomical contour are not provided in the supplied data and should be confirmed from the manufacturer’s technical drawings.
- Compression Plate Configuration
The product is specifically identified as:
Locking Bone Compression Plate
according to the supplied product name.
This designation indicates that the product belongs to a compression-plate family incorporating a locking fixation concept.
However, the exact compression mechanism, compression-hole geometry, permitted screw positioning, and locking characteristics are not defined in the supplied image and should not be inferred solely from the product name.
- Shaft Section
According to the supplied product information, the plate is available with:
2 Shaft Holes
3 Shaft Holes
4 Shaft Holes
5 Shaft Holes
6 Shaft Holes
7 Shaft Holes
8 Shaft Holes
9 Shaft Holes
10 Shaft Holes
12 Shaft Holes
14 Shaft Holes
This provides 11 listed shaft-hole configurations within the product family.
The exact overall plate length corresponding to each hole configuration is not provided.
- No Separate Head-Hole Configuration
The supplied product data states:
Head Holes: –
Therefore, no numerical head-hole count is specified.
This is consistent with the visual appearance of an elongated plate without a clearly differentiated anatomical head section.
The exact classification of all plate openings should still be confirmed from the manufacturer’s technical documentation.
- Multiple Fixation Opening Geometries
The supplied image visually shows different opening geometries distributed along the plate.
These include:
- Circular openings.
- Elongated / contoured openings.
- Longitudinally distributed fixation positions.
The exact function of each opening—such as locking fixation, compression, conventional screw fixation, neutral positioning, or another function—is not defined in the supplied image and should be confirmed from the approved surgical technique.
- Small Configuration
According to the supplied product data:
Alignment: Small
The term Small appears to describe the plate size or configuration, rather than an anatomical alignment such as Left / Right.
Therefore, for a final product sheet, it may be more precise to record:
Configuration: Small
unless the manufacturer’s official catalog intentionally uses Alignment as the field name.
- Material Options
According to the supplied product information, the plate is available in:
SS316L
and
Titanium
The exact Titanium grade or alloy is not specified and should be confirmed from the manufacturer’s material documentation.
Intended Use
The Locking Bone Compression Plate, Small 3.5 mm is designed for use as part of a compatible orthopedic fixation system according to the approved indications, surgical technique, and Instructions for Use.
The supplied image does not specify a particular anatomical region.
Potential applications may involve bone fixation procedures in anatomical sites where this Small 3.5 mm compression plate is included within the manufacturer’s approved indications.
The exact anatomical locations, fracture classifications, fixation techniques, surgical approaches, contraindications, and patient-selection criteria should be confirmed from the official product documentation.
Plate selection may depend on factors including:
- Anatomical location.
- Bone dimensions.
- Fracture location and configuration.
- Required fixation construct.
- Required compression strategy.
- Required plate length.
- Required shaft-hole configuration.
- Bone quality.
- Compatible screw selection.
- Compatible instrumentation.
- Surgical approach.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified orthopedic surgeon according to the approved surgical technique and Instructions for Use.
Key Benefits
Broad Range of Plate Configurations
The product family is available with:
2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 12 / 14 Shaft Holes
providing a broad selection of plate configurations.
This supports selection among different plate variants according to the required fixation construct and plate length.
Locking Compression Plate Design
The product is specifically identified as a:
Locking Bone Compression Plate
combining a locking plate designation with a compression plate configuration.
The exact locking and compression characteristics should be confirmed from the manufacturer’s approved technical documentation.
Small Plate Configuration
The plate is identified as:
Small
providing a specific size/configuration within the product family.
The exact dimensions defining the Small configuration are not supplied and should be confirmed from the manufacturer’s dimensional drawings.
3.5 mm Fixation System
The product is identified as:
Locking Bone Compression Plate, Small 3.5 mm
indicating its association with a compatible 3.5 mm orthopedic fixation system.
The exact compatible screw type, screw diameter, and hole-specific locking/compression use should be confirmed from the manufacturer’s technical documentation.
Two Material Options
According to the supplied product data, the plate is available in:
SS316L
and
Titanium
Multiple Plate-Length Variants
The increasing shaft-hole options from:
2 → 3 → 4 → 5 → 6 → 7 → 8 → 9 → 10 → 12 → 14
indicate multiple plate variants within the product family.
The exact physical lengths corresponding to these configurations are not provided.
Multiple Product Variants
Based strictly on the supplied product information, the family includes:
- 1 listed size/configuration: Small
- No numerical head-hole configuration specified
- 11 shaft-hole options: 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 12 / 14
- 2 material options: SS316L / Titanium
If every shaft-hole configuration is available in both materials, this could represent up to 22 basic shaft × material combinations.
The exact commercial configuration matrix should be confirmed from the official Cat. No. table.
Technical Specifications
| Specification | Product Data |
| Product Name | Locking Bone Compression Plate, Small 3.5 mm |
| Product Category | Orthopedic Fixation |
| Product Type | Locking Bone Compression Plate |
| Plate Configuration | Small |
| Anatomical Region | Not specified |
| System Size | 3.5 mm |
| Alignment / Configuration | Small |
| Head Holes | Not specified |
| Shaft Hole Options | 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 |
| Number of Shaft-Hole Variants | 11 |
| Materials | SS316L, Titanium |
| Potential Basic Configurations | Up to 22, subject to catalog confirmation |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
| Plate Lengths | Not provided |
| Plate Width | Not provided |
| Plate Thickness | Not provided |
| Compression Hole Geometry | Not provided |
| Compatible Screw Details | Not provided |
| Locking Mechanism Details | Not provided |
| Titanium Grade | Not provided |
| Compatible Instrumentation | Not provided |
Technical Overview
Product Name: Locking Bone Compression Plate, Small 3.5 mm
Product Category: Orthopedic Fixation
Product Type: Locking Bone Compression Plate
Plate Configuration: Small
System: 3.5 mm
Anatomical Region: Not specified
Alignment: Supplied as “Small”; more appropriately interpreted as a configuration/size pending catalog confirmation
Head Holes: Not specified
Shaft Hole Options: 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, and 14
Material Options: SS316L and Titanium
Plate Geometry: Narrow elongated fixation plate
Fixation Concept: Plate-and-screw internal fixation using a compatible orthopedic fixation system
Compression Concept: Identified as Bone Compression Plate; exact mechanism not supplied
Side-Specific Design: Not specified
Cat. No.: Not supplied
GTIN No.: Not supplied
Plate Lengths: Not supplied
Plate Thickness: Not supplied
Specific Titanium Grade: Not supplied
Specific Screw Compatibility: Not supplied
Product Features
- Locking orthopedic fixation plate design.
- Specifically identified as a Bone Compression Plate.
- Identified as the Small configuration.
- Associated with a 3.5 mm fixation system.
- No numerical head-hole specification is provided.
- Available with 2 shaft holes.
- Available with 3 shaft holes.
- Available with 4 shaft holes.
- Available with 5 shaft holes.
- Available with 6 shaft holes.
- Available with 7 shaft holes.
- Available with 8 shaft holes.
- Available with 9 shaft holes.
- Available with 10 shaft holes.
- Available with 12 shaft holes.
- Available with 14 shaft holes.
- Provides 11 shaft-hole configurations.
- Available in SS316L.
- Available in Titanium.
- Features a narrow elongated plate body.
- Includes multiple longitudinal fixation openings.
- Includes circular openings visible in the supplied image.
- Includes elongated / contoured openings visible in the supplied image.
- Supports a broad range of potential plate-length variants.
- Exact anatomical indication should be confirmed from official documentation.
- Exact compression-hole functionality should be confirmed from the manufacturer’s technical documentation.
- Exact locking mechanism and compatible screw specifications should be confirmed from the product system documentation.
- Exact plate lengths, width, and thickness should be confirmed from the manufacturer’s dimensional specifications.
- Individual Cat. No. and GTIN No. should be added when the official product table is available.
- Approved indications, contraindications, and surgical technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.