Product Explanation
The Locking Clavicle Hook Plate, 3.5 mm is an orthopedic fixation plate intended to form part of a compatible internal fixation construct in the clavicle / shoulder region.
A simplified fixation concept can be represented as:
Clavicle Region → Clavicle Hook Plate → Compatible Fixation Screws → Internal Fixation Construct
The product is specifically identified as a:
Clavicle Hook Plate
and incorporates a hooked / blade-type terminal geometry as part of the plate design.
According to the supplied product data, three blade-height configurations are available:
12 mm / 15 mm / 18 mm
The plate is also available in:
Left / Right
versions and with:
4 / 5 / 6 / 7 Shaft Holes
providing multiple product configurations for implant selection.
Product Components and Design
- Clavicle Hook Plate Body
The implant consists of a metallic fixation plate with an elongated shaft and a specialized hooked terminal section.
The product is specifically identified as:
Locking Clavicle Hook Plate
according to the supplied product designation.
The exact anatomical contour, plate curvature, hook dimensions, plate width, and thickness should be confirmed from the manufacturer’s technical drawings.
- Hook / Blade Section
A defining feature of the product is the terminal:
Hook / Blade Configuration
According to the supplied product information, this section is available in three blade heights:
12 mm
15 mm
18 mm
These represent three distinct dimensional variants within the plate family.
The image does not provide other hook dimensions such as blade width, hook depth, hook angle, offset, or curvature radius.
- Blade Height Options
The supplied catalog data clearly identifies:
Blade Height: 12 mm, 15 mm, 18 mm
This provides three implant geometry options.
Blade-height selection should be made according to the approved surgical technique, anatomy, fixation requirements, and official product documentation.
The exact method and anatomical reference used to define blade height should be confirmed from the manufacturer’s dimensional drawing.
- Shaft Section
The plate is available with:
4 Shaft Holes
5 Shaft Holes
6 Shaft Holes
7 Shaft Holes
This provides four shaft configurations within the product family.
The exact overall plate length corresponding to each shaft-hole configuration is not provided in the supplied image.
- Multiple Fixation Opening Geometries
The supplied product image visually shows several fixation openings distributed along the plate shaft.
These include:
- Circular openings.
- Elongated / contoured openings.
- Multiple longitudinal fixation positions.
The exact technical role of each opening—such as locking fixation, conventional fixation, compression, positioning, or adjustment—is not defined in the supplied product information and should be confirmed from the approved surgical technique.
- Left and Right Configurations
According to the supplied product data, the plate is available in:
Left / Right
alignment options.
This indicates side-specific versions within the product family.
The exact geometric differences between the Left and Right configurations should be confirmed from the manufacturer’s engineering drawings.
- Material Options
According to the supplied product information, the plate is available in:
SS316L
and
Titanium
The exact Titanium alloy or grade is not specified in the supplied image and should be confirmed from the manufacturer’s official material specification.
Intended Use
The Locking Clavicle Hook Plate, 3.5 mm is designed for use as part of a compatible orthopedic fixation system involving the clavicle / shoulder region, according to the approved indications, surgical technique, and Instructions for Use.
Potential applications may involve fixation procedures in the clavicle region where a hook plate configuration is included within the manufacturer’s approved indications.
The exact fracture types, joint-related indications, anatomical applications, surgical approach, fixation strategy, contraindications, and patient-selection criteria should be confirmed from the official product documentation.
Plate selection may depend on factors including:
- Anatomical side.
- Clavicle anatomy.
- Required hook / blade geometry.
- Required blade height.
- Required shaft-hole configuration.
- Required plate length.
- Bone dimensions.
- Bone quality.
- Fixation requirements.
- Compatible screw selection.
- Compatible instrumentation.
- Surgical approach.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified orthopedic surgeon in accordance with the approved surgical technique and Instructions for Use.
Key Benefits
Dedicated Clavicle Hook Configuration
The product is specifically identified as a:
Locking Clavicle Hook Plate
providing a specialized hook-plate geometry within a compatible clavicle fixation system.
The exact biomechanical role and approved clinical applications of the hook configuration should be confirmed from the manufacturer’s documentation.
Three Blade-Height Options
The plate is available with:
12 mm
15 mm
18 mm
blade-height configurations.
This provides three hook / blade geometry options within the product family.
Left and Right Anatomical Options
The plate is available in:
Left / Right
configurations, supporting side-specific implant selection.
Four Shaft-Hole Configurations
The product family includes:
4 / 5 / 6 / 7 Shaft Holes
providing four plate configurations.
This supports selection between different shaft lengths or fixation layouts.
3.5 mm Fixation System
The product is identified as:
Locking Clavicle Hook Plate, 3.5 mm
indicating its association with a compatible 3.5 mm orthopedic fixation system.
The exact compatible screw type and hole-specific screw specification should be confirmed from the manufacturer’s system documentation.
Two Material Options
According to the supplied product data, the plate is available in:
SS316L
and
Titanium
Multiple Product Variants
Based strictly on the supplied product information, the family includes:
- 2 alignment options: Left / Right
- 3 blade-height options: 12 / 15 / 18 mm
- 4 shaft-hole options: 4 / 5 / 6 / 7
- 2 material options: SS316L / Titanium
If every listed option is available in every combination, this could theoretically represent:
2 × 3 × 4 × 2 = 48 basic configurations
However, the supplied image does not confirm that all alignment, blade-height, shaft-hole, and material options can be combined freely. The exact number of commercially available configurations should therefore be confirmed from the official Cat. No. table.
Technical Specifications
| Specification | Product Data |
| Product Name | Locking Clavicle Hook Plate, 3.5 mm |
| Product Category | Trauma – Clavicle |
| Product Type | Locking Orthopedic Fixation Plate |
| Plate Configuration | Clavicle Hook Plate |
| Anatomical Region | Clavicle / Shoulder region |
| System Size | 3.5 mm |
| Alignment | Left, Right |
| Blade Height Options | 12 mm, 15 mm, 18 mm |
| Shaft Hole Options | 4, 5, 6, 7 |
| Materials | SS316L, Titanium |
| Potential Maximum Configurations | Up to 48, subject to catalog confirmation |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
| Plate Lengths | Not provided |
| Plate Width | Not provided |
| Plate Thickness | Not provided |
| Hook / Blade Width | Not provided |
| Hook / Blade Angle | Not provided |
| Hook Depth / Offset | Not provided |
| Compatible Screw Details | Not provided |
| Screw Trajectories | Not provided |
| Titanium Grade | Not provided |
| Compatible Instrumentation | Not provided |
Technical Overview
Product Name: Locking Clavicle Hook Plate, 3.5 mm
Product Category: Trauma – Clavicle
Product Type: Locking Orthopedic Fixation Plate
Plate Type: Clavicle Hook Plate
Anatomical Region: Clavicle / Shoulder region
System: 3.5 mm
Alignment Options: Left and Right
Blade Height Options: 12 mm, 15 mm, and 18 mm
Shaft Hole Options: 4, 5, 6, and 7
Material Options: SS316L and Titanium
Plate Geometry: Elongated fixation plate with specialized terminal hook / blade section
Fixation Concept: Plate-and-screw internal fixation using a compatible orthopedic fixation system
Side-Specific Design: Yes — Left / Right
Cat. No.: Not supplied
GTIN No.: Not supplied
Plate Lengths: Not supplied
Blade Height: 12 / 15 / 18 mm
Other Hook Dimensions: Not supplied
Specific Titanium Grade: Not supplied
Specific Screw Compatibility: Not supplied
Product Features
- Locking orthopedic fixation plate design.
- Specifically identified as a Clavicle Hook Plate.
- Included within the Trauma – Clavicle product category.
- Associated with a 3.5 mm fixation system.
- Available in Left and Right configurations.
- Available with 12 mm blade height.
- Available with 15 mm blade height.
- Available with 18 mm blade height.
- Available with 4 shaft holes.
- Available with 5 shaft holes.
- Available with 6 shaft holes.
- Available with 7 shaft holes.
- Available in SS316L.
- Available in Titanium.
- Features a specialized hook / blade terminal section.
- Features an elongated fixation shaft.
- Includes multiple fixation openings.
- Includes circular openings visible in the supplied image.
- Includes elongated / contoured openings visible in the supplied image.
- Supports side-specific implant selection.
- Supports three blade-height configurations.
- Supports four shaft-hole configurations.
- Supports multiple possible plate-length and hook-height variants.
- Exact method used to define the 12 / 15 / 18 mm blade height should be confirmed from the manufacturer’s dimensional drawing.
- Exact hook depth, angle, offset, and width should be confirmed from official technical documentation.
- Exact compatible screw types and diameters should be confirmed from the manufacturer’s system documentation.
- Exact screw trajectories and locking characteristics should be confirmed from approved technical drawings.
- Exact plate lengths, width, and thickness should be confirmed from the manufacturer’s dimensional specifications.
- Individual Cat. No. and GTIN No. should be added when the official product table is available.
- Approved indications, contraindications, and surgical technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.