Product Explanation
The Locking T Simple Plate, 5.0 mm is an orthopedic fixation plate intended to form part of a compatible internal fixation construct.
A simplified fixation concept can be represented as:
Prepared Bone → T-Shaped Locking Plate → Compatible Fixation Screws → Internal Fixation Construct
The product is specifically identified as a:
T Simple Plate
indicating a T-shaped fixation geometry with a transverse head section connected to an elongated longitudinal shaft.
According to the supplied product information, the plate is listed with:
Simple
configuration and is available with:
3 / 4 / 5 / 6 / 8 / 10 / 12 Shaft Holes
providing multiple plate variants.
The exact anatomical application is not identified in the supplied image and should therefore be confirmed from the manufacturer’s approved product documentation.
Product Components and Design
- T-Shaped Plate Body
The implant consists of a metallic fixation plate with a widened transverse head section and an elongated shaft.
This creates the characteristic:
T-shaped plate geometry
visible in the supplied product image.
The exact head width, shaft length, plate thickness, curvature, and anatomical contour are not provided in the supplied data.
- Simple Configuration
The supplied table states:
Alignment: Simple
However, Simple does not represent a conventional anatomical alignment such as Left, Right, or Straight.
It appears more likely to describe the plate configuration / variant.
For a final structured product sheet, the safer terminology would therefore be:
Configuration: Simple
while retaining the original source wording for traceability.
- Transverse Head Section
The widened terminal portion of the plate visibly incorporates multiple fixation openings.
However, the supplied product data states:
Head Holes: –
Therefore:
Head Holes: Not specified
should be used in the technical sheet.
The exact number, classification, compatible screw type, locking mechanism, and trajectory of the head openings should be confirmed from the manufacturer’s technical drawings.
- Shaft Section
According to the supplied product information, the plate is available with:
3 Shaft Holes
4 Shaft Holes
5 Shaft Holes
6 Shaft Holes
8 Shaft Holes
10 Shaft Holes
12 Shaft Holes
This provides seven listed shaft-hole configurations within the product family.
The exact physical plate length corresponding to each configuration is not supplied.
- Multiple Fixation Opening Geometries
The supplied product image visually shows several opening geometries, including:
- Openings within the transverse T-shaped head.
- Circular / rounded shaft openings.
- Elongated or contoured openings.
- Multiple longitudinal fixation positions.
The exact technical role of each opening—such as locking fixation, conventional fixation, compression, positioning, or another function—is not defined in the supplied product data and should be confirmed from the approved surgical technique.
- Material Options
According to the supplied product information, the plate is available in:
SS316L
and
Titanium
The exact Titanium alloy or grade is not specified in the supplied image and should be confirmed from the manufacturer’s official material documentation.
Intended Use
The Locking T Simple Plate, 5.0 mm is designed for use as part of a compatible orthopedic fixation system according to the approved indications, surgical technique, and Instructions for Use.
The supplied image does not specify a precise anatomical region or approved fracture indication.
Potential use should therefore be described only generally as orthopedic fixation where this T-shaped locking plate configuration is included within the manufacturer’s approved indications.
The exact anatomical location, fracture type, fixation strategy, surgical approach, contraindications, and patient-selection criteria should be confirmed from the official product documentation.
Plate selection may depend on factors including:
- Anatomical location.
- Bone dimensions.
- Fracture location and configuration.
- Required T-shaped plate geometry.
- Required fixation construct.
- Required shaft-hole configuration.
- Required plate length.
- Bone quality.
- Compatible screw selection.
- Compatible instrumentation.
- Surgical approach.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified orthopedic surgeon according to the approved surgical technique and Instructions for Use.
Key Benefits
T-Shaped Plate Configuration
The product is specifically identified as a:
Locking T Simple Plate
providing a distinct T-shaped fixation geometry within a compatible orthopedic fixation system.
The exact anatomical and biomechanical role should be confirmed from the manufacturer’s approved documentation.
Simple Configuration
The supplied product information identifies the product as:
Simple
which distinguishes this plate from other possible T-plate variants.
The exact technical definition of the Simple configuration should be confirmed from the manufacturer’s catalog.
Seven Shaft-Hole Configurations
The plate family includes:
3 / 4 / 5 / 6 / 8 / 10 / 12 Shaft Holes
providing seven different shaft-hole configurations.
This supports selection among different plate variants according to fixation requirements and surgical planning.
5.0 mm Fixation System
The product is identified as:
Locking T Simple Plate, 5.0 mm
indicating its association with a compatible 5.0 mm orthopedic fixation system.
The exact compatible screw types and whether every visible opening accepts the same screw diameter should be confirmed from the manufacturer’s system documentation.
Two Material Options
According to the supplied product information, the plate is available in:
SS316L
and
Titanium
Multiple Plate-Length Configurations
The available shaft-hole options:
3 → 4 → 5 → 6 → 8 → 10 → 12
indicate multiple potential plate-length variants.
The corresponding physical plate lengths are not supplied and should be confirmed from the manufacturer’s dimensional specifications.
Multiple Product Variants
Based strictly on the supplied product information, the family includes:
- 1 listed configuration: Simple
- No numerical head-hole configuration specified
- 7 shaft-hole options: 3 / 4 / 5 / 6 / 8 / 10 / 12
- 2 material options: SS316L / Titanium
If every shaft-hole configuration is available in both materials, this could represent up to 14 basic shaft × material combinations.
The exact number of commercially available variants should be confirmed from the official Cat. No. table.
Technical Specifications
| Specification | Product Data |
| Product Name | Locking T Simple Plate, 5.0 mm |
| Product Category | Orthopedic Fixation |
| Product Type | Locking T-Shaped Plate |
| Plate Configuration | Simple |
| Anatomical Region | Not specified |
| System Size | 5.0 mm |
| Alignment / Configuration | Listed as “Simple” |
| Head Holes | Not specified |
| Shaft Hole Options | 3, 4, 5, 6, 8, 10, 12 |
| Number of Shaft-Hole Options | 7 |
| Materials | SS316L, Titanium |
| Potential Basic Configurations | Up to 14, subject to catalog confirmation |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
| Plate Lengths | Not provided |
| Head Width | Not provided |
| Plate Width | Not provided |
| Plate Thickness | Not provided |
| T-Head Geometry / Angle | Not provided |
| Compatible Screw Details | Not provided |
| Screw Trajectories | Not provided |
| Titanium Grade | Not provided |
| Compatible Instrumentation | Not provided |
Technical Overview
Product Name: Locking T Simple Plate, 5.0 mm
Product Category: Orthopedic Fixation
Product Type: Locking Orthopedic Fixation Plate
Plate Type: T-Shaped Simple Plate
Anatomical Region: Not specified
System: 5.0 mm
Configuration: Simple
Head Holes: Not specified
Shaft Hole Options: 3, 4, 5, 6, 8, 10, and 12
Material Options: SS316L and Titanium
Plate Geometry: Transverse T-shaped head connected to an elongated shaft
Fixation Concept: Plate-and-screw internal fixation using a compatible orthopedic fixation system
Side-Specific Design: Not specified
Cat. No.: Not supplied
GTIN No.: Not supplied
Plate Dimensions: Not supplied
Specific Titanium Grade: Not supplied
Specific Screw Compatibility: Not supplied
Product Features
- Locking orthopedic fixation plate design.
- Specifically identified as a T Simple Plate.
- Features a characteristic T-shaped geometry.
- Associated with a 5.0 mm fixation system.
- Identified as the Simple configuration.
- No numerical head-hole count is specified in the supplied product data.
- Available with 3 shaft holes.
- Available with 4 shaft holes.
- Available with 5 shaft holes.
- Available with 6 shaft holes.
- Available with 8 shaft holes.
- Available with 10 shaft holes.
- Available with 12 shaft holes.
- Provides seven shaft-hole configurations.
- Available in SS316L.
- Available in Titanium.
- Features a transverse fixation head.
- Features an elongated longitudinal shaft.
- Includes multiple visible fixation openings.
- Includes circular and elongated / contoured openings.
- Supports multiple potential plate-length configurations.
- Exact anatomical indication should be confirmed from official documentation.
- Exact meaning of the Simple configuration should be confirmed from the manufacturer’s master catalog.
- Exact head-hole count and classification should be confirmed from the manufacturer’s technical drawings.
- Exact compatible screw types and diameters should be confirmed from the product system documentation.
- Exact screw trajectories and locking characteristics should be confirmed from approved technical drawings.
- Exact plate lengths, head width, plate width, geometry, and thickness should be confirmed from the manufacturer’s dimensional specifications.
- Individual Cat. No. and GTIN No. should be added when the official product table is available.
Approved indications, contraindications, and surgical technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.