Product Explanation
The Locking Lateral Distal Fibula Plate, 2.7 mm is an orthopedic fixation plate intended to form part of a compatible internal fixation construct involving the distal fibula.
A simplified fixation concept can be represented as:
Distal Fibula → Lateral Locking Plate → Compatible Fixation Screws → Internal Fixation Construct
The product is specifically identified as a:
Lateral Distal Fibula Plate
according to the supplied product designation.
The plate features a widened distal fixation section connected to an elongated longitudinal shaft.
According to the supplied product information, the plate family includes:
3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 Shaft Holes
providing a broad range of plate configurations.
No Left / Right alignment is specified in the supplied table.
Product Components and Design
- Lateral Distal Fibula Plate Body
The implant consists of an elongated metallic fixation plate with a broadened distal section and a narrower longitudinal shaft.
The supplied image shows a contoured plate geometry rather than a completely straight plate.
The exact:
- Plate length.
- Distal width.
- Shaft width.
- Plate thickness.
- Anatomical curvature.
- Offset.
- Torsion.
are not provided and should be confirmed from the manufacturer’s technical drawings.
- Distal Fixation Section
The distal region is visibly broadened and incorporates multiple fixation openings.
However, the supplied product table states:
Head Holes: –
Therefore, no official numerical head-hole count is provided.
The exact number, classification, locking characteristics, compatible screw type, and trajectories of the distal openings should be confirmed from the manufacturer’s official documentation rather than determined by visual counting.
- Shaft Section
According to the supplied product information, the plate is available with:
3 Shaft Holes
4 Shaft Holes
5 Shaft Holes
6 Shaft Holes
7 Shaft Holes
8 Shaft Holes
9 Shaft Holes
10 Shaft Holes
11 Shaft Holes
12 Shaft Holes
This provides 10 listed shaft-hole configurations within the product family.
The corresponding physical plate lengths are not supplied.
- Multiple Fixation Opening Geometries
The supplied product image visually shows several fixation-opening geometries, including:
- Multiple circular distal openings.
- Circular shaft openings.
- An elongated / oblong shaft opening.
- Multiple longitudinal fixation positions.
The exact function of each opening—such as locking fixation, conventional fixation, compression, positioning, or another role—is not defined in the supplied image and should be confirmed from the approved surgical technique.
- Lateral Plate Configuration
The product is specifically identified as:
Lateral
within the product title.
This indicates a distinct distal fibular plate configuration.
The exact anatomical position, contour, and approved fixation strategy associated with the lateral configuration should be confirmed from the manufacturer’s surgical technique.
- Alignment
According to the supplied product data:
Alignment: –
Therefore, no specific:
Left / Right
configuration is stated.
The product should not be described as side-specific unless this is confirmed elsewhere in the manufacturer’s catalog.
- Material Options
According to the supplied product information, the plate is available in:
SS316L
and
Titanium
The exact Titanium grade or alloy is not specified and should be confirmed from the manufacturer’s material documentation.
Intended Use
The Locking Lateral Distal Fibula Plate, 2.7 mm is designed for use as part of a compatible orthopedic fixation system involving the distal fibula, according to the approved indications, surgical technique, and Instructions for Use.
Potential applications may involve internal fixation of the distal fibula where this lateral plate configuration is included within the manufacturer’s approved indications.
The exact fracture patterns, fracture classifications, surgical approach, anatomical indications, fixation strategy, contraindications, and patient-selection criteria should be confirmed from official product documentation.
Plate selection may depend on factors including:
- Distal fibular anatomy.
- Fracture location and configuration.
- Required lateral plate geometry.
- Required fixation construct.
- Required plate length.
- Required shaft-hole configuration.
- Bone dimensions.
- Bone quality.
- Compatible screw selection.
- Distal screw trajectory requirements.
- Compatible instrumentation.
- Surgical approach.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified orthopedic surgeon according to the approved surgical technique and Instructions for Use.
Key Benefits
Distal Fibula-Specific Configuration
The product is specifically identified as a:
Locking Lateral Distal Fibula Plate
providing a dedicated plate geometry within a compatible distal fibula fixation system.
Broad Range of Shaft-Hole Options
The product family includes:
3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 Shaft Holes
providing 10 different shaft-hole configurations.
This supports selection among different plate variants according to fixation requirements and surgical planning.
2.7 mm Fixation System
The product is identified as:
Locking Lateral Distal Fibula Plate, 2.7 mm
indicating its association with a compatible 2.7 mm orthopedic fixation system.
The exact compatible screw type and whether all visible openings accept the same screw specification should be confirmed from the manufacturer’s system documentation.
Lateral Plate Geometry
The supplied product designation identifies a:
Lateral
distal fibular configuration.
The exact anatomical and biomechanical characteristics of this plate orientation should be confirmed from the manufacturer’s documentation.
Two Material Options
According to the supplied product data, the plate is available in:
SS316L
and
Titanium
Multiple Plate-Length Configurations
The available shaft-hole options:
3 → 4 → 5 → 6 → 7 → 8 → 9 → 10 → 11 → 12
indicate multiple plate-length variants within the family.
The corresponding physical lengths should be confirmed from the manufacturer’s dimensional table.
Multiple Product Variants
Based strictly on the supplied product information, the family includes:
- Alignment: Not specified
- Head holes: Not specified
- 10 shaft-hole options: 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12
- 2 material options: SS316L / Titanium
If every shaft-hole option is available in both materials, this could represent up to 20 basic shaft × material combinations.
The exact commercial configuration matrix should be confirmed from the official Cat. No. table.
Technical Specifications
| Specification | Product Data |
| Product Name | Locking Lateral Distal Fibula Plate, 2.7 mm |
| Product Category | Trauma |
| Product Type | Locking Orthopedic Fixation Plate |
| Plate Configuration | Lateral Distal Fibula Plate |
| Anatomical Region | Distal Fibula – Lateral |
| System Size | 2.7 mm |
| Alignment | Not specified |
| Head Holes | Not specified |
| Shaft Hole Options | 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 |
| Number of Shaft-Hole Options | 10 |
| Materials | SS316L, Titanium |
| Potential Basic Configurations | Up to 20, subject to catalog confirmation |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
| Plate Lengths | Not provided |
| Distal Plate Width | Not provided |
| Plate Thickness | Not provided |
| Anatomical Contour | Not provided |
| Compatible Screw Details | Not provided |
| Screw Trajectories | Not provided |
| Titanium Grade | Not provided |
| Compatible Instrumentation | Not provided |
Technical Overview
Product Name: Locking Lateral Distal Fibula Plate, 2.7 mm
Product Category: Trauma
Product Type: Locking Orthopedic Fixation Plate
Plate Type: Lateral Distal Fibula Plate
Anatomical Region: Distal Fibula
System: 2.7 mm
Alignment: Not specified
Head Holes: Not specified
Shaft Hole Options: 3, 4, 5, 6, 7, 8, 9, 10, 11, and 12
Material Options: SS316L and Titanium
Plate Geometry: Broadened distal fixation section with elongated shaft
Fixation Concept: Plate-and-screw internal fixation using a compatible orthopedic fixation system
Side-Specific Design: Not specified
Configuration: Lateral Distal Fibula
Cat. No.: Not supplied
GTIN No.: Not supplied
Plate Dimensions: Not supplied
Specific Titanium Grade: Not supplied
Specific Screw Compatibility: Not supplied
Product Features
- Locking orthopedic fixation plate design.
- Specifically identified as a Lateral Distal Fibula Plate.
- Associated with a 2.7 mm fixation system.
- Alignment is not specified in the supplied product data.
- No numerical head-hole count is specified.
- Available with 3 shaft holes.
- Available with 4 shaft holes.
- Available with 5 shaft holes.
- Available with 6 shaft holes.
- Available with 7 shaft holes.
- Available with 8 shaft holes.
- Available with 9 shaft holes.
- Available with 10 shaft holes.
- Available with 11 shaft holes.
- Available with 12 shaft holes.
- Provides 10 shaft-hole configurations.
- Available in SS316L.
- Available in Titanium.
- Features a broadened distal fixation section.
- Features an elongated longitudinal shaft.
- Includes multiple visible distal fixation openings.
- Includes circular fixation openings.
- Includes an elongated / oblong shaft opening.
- Supports multiple potential plate-length configurations.
- Exact distal head-hole count and classification should be confirmed from official technical documentation.
- Exact compatible screw types and diameters should be confirmed from the manufacturer’s system documentation.
- Exact screw trajectories and locking characteristics should be confirmed from approved technical drawings.
- Exact plate lengths, distal contour, distal width, and thickness should be confirmed from the manufacturer’s dimensional specifications.
- Individual Cat. No. and GTIN No. should be added when the official product table is available.
- Approved indications, contraindications, and surgical technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.