Product Explanation
The Locking One Third Plate, 3.5 mm is an orthopedic fixation plate intended to form part of a compatible internal fixation construct.
A simplified fixation concept can be represented as:
Prepared Bone → Locking One Third Plate → Compatible Fixation Screws → Internal Fixation Construct
The product is specifically identified as a:
One Third Plate
and features a narrow elongated plate profile with fixation openings distributed longitudinally along the plate body.
According to the supplied product data, the product family includes:
4 / 5 / 6 / 7 / 8 / 9 / 10 / 12 Shaft Holes
providing multiple plate-length configurations.
The exact anatomical application is not stated in the supplied product image and should therefore be confirmed from the manufacturer’s official catalog.
Product Components and Design
- One Third Plate Body
The implant consists of a narrow elongated metallic fixation plate.
The supplied product image shows a relatively slim longitudinal profile with fixation openings arranged along the length of the plate.
The exact:
- Plate length.
- Plate width.
- Plate thickness.
- Cross-sectional geometry.
- Curvature.
- Anatomical contour.
are not provided in the supplied data.
- Longitudinal Fixation Profile
The plate incorporates multiple fixation positions distributed along its longitudinal axis.
This provides different plate configurations according to the listed number of shaft holes.
The exact physical distance between adjacent holes and the overall plate length for each configuration are not supplied.
- Shaft Hole Configurations
According to the supplied product information, the plate is available with:
4 Shaft Holes
5 Shaft Holes
6 Shaft Holes
7 Shaft Holes
8 Shaft Holes
9 Shaft Holes
10 Shaft Holes
12 Shaft Holes
This provides eight listed shaft-hole configurations.
The exact corresponding plate lengths should be confirmed from the manufacturer’s dimensional table.
- Head-Hole Configuration
The supplied product table states:
Head Holes: –
Therefore:
Head Holes: Not specified
should be used in the technical sheet.
The product visually does not show a clearly differentiated anatomical head section, but the official hole classification should still be confirmed from the manufacturer’s technical documentation.
- Fixation Opening Geometry
The supplied image visually shows repeated fixation openings along the plate.
These appear predominantly rounded / oval in shape.
However, the exact technical function of the openings—such as:
- Locking fixation.
- Conventional fixation.
- Compression.
- Neutral positioning.
- Variable-angle fixation.
is not specified in the supplied product data and should not be inferred solely from visual appearance.
- Alignment
According to the supplied product information:
Alignment: –
Therefore, no:
Left / Right / Straight
or other directional configuration is officially specified.
The product should not be described as side-specific based solely on the supplied image.
- Material Options
According to the supplied product data, the plate is available in:
SS316L
and
Titanium
The exact Titanium alloy or grade is not specified and should be confirmed from the manufacturer’s official material documentation.
Intended Use
The Locking One Third Plate, 3.5 mm is designed for use as part of a compatible orthopedic fixation system according to the approved indications, surgical technique, and Instructions for Use.
The supplied image does not specify the exact anatomical region or approved fracture indication.
Potential use should therefore be described only generally as orthopedic fixation where this plate configuration is included within the manufacturer’s approved indications.
The exact anatomical applications, fracture patterns, surgical approach, fixation strategy, contraindications, and patient-selection criteria should be confirmed from official product documentation.
Plate selection may depend on factors including:
- Anatomical location.
- Bone dimensions.
- Fracture location and configuration.
- Required plate length.
- Required shaft-hole configuration.
- Required fixation construct.
- Bone quality.
- Compatible screw selection.
- Compatible instrumentation.
- Surgical approach.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified orthopedic surgeon according to the approved surgical technique and Instructions for Use.
Key Benefits
Multiple Plate-Length Configurations
The product family includes:
4 / 5 / 6 / 7 / 8 / 9 / 10 / 12 Shaft Holes
providing eight different configurations.
This supports selection among different plate variants according to fixation requirements and surgical planning.
Narrow Elongated Plate Geometry
The supplied image shows a relatively narrow and elongated plate configuration.
The exact dimensional definition of the One Third design should be confirmed from the manufacturer’s technical drawings.
3.5 mm Fixation System
The product is identified as:
Locking One Third Plate, 3.5 mm
indicating its association with a compatible 3.5 mm orthopedic fixation system.
The exact compatible screw types and whether every opening accepts the same 3.5 mm screw specification should be confirmed from the manufacturer’s system documentation.
Two Material Options
The plate is available in:
SS316L
and
Titanium
according to the supplied product data.
Multiple Product Variants
Based strictly on the supplied information, the family includes:
- Alignment: Not specified
- Head-hole configuration: Not specified
- 8 shaft-hole options: 4 / 5 / 6 / 7 / 8 / 9 / 10 / 12
- 2 material options: SS316L / Titanium
If every shaft-hole configuration is available in both materials, this could represent up to 16 basic shaft × material combinations.
The exact commercial configuration matrix should be confirmed from the official Cat. No. table.
Technical Specifications
| Specification | Product Data |
| Product Name | Locking One Third Plate, 3.5 mm |
| Product Category | Orthopedic Fixation |
| Product Type | Locking Orthopedic Fixation Plate |
| Plate Configuration | One Third Plate |
| Anatomical Region | Not specified |
| System Size | 3.5 mm |
| Alignment | Not specified |
| Head Holes | Not specified |
| Shaft Hole Options | 4, 5, 6, 7, 8, 9, 10, 12 |
| Number of Shaft-Hole Options | 8 |
| Materials | SS316L, Titanium |
| Potential Basic Configurations | Up to 16, subject to catalog confirmation |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
| Plate Lengths | Not provided |
| Plate Width | Not provided |
| Plate Thickness | Not provided |
| Cross-Sectional Geometry | Not provided |
| Compatible Screw Details | Not provided |
| Locking Mechanism Details | Not provided |
| Titanium Grade | Not provided |
| Compatible Instrumentation | Not provided |
Technical Overview
Product Name: Locking One Third Plate, 3.5 mm
Product Category: Orthopedic Fixation
Product Type: Locking Orthopedic Fixation Plate
Plate Type: One Third Plate
Anatomical Region: Not specified
System: 3.5 mm
Alignment: Not specified
Head Holes: Not specified
Shaft Hole Options: 4, 5, 6, 7, 8, 9, 10, and 12
Material Options: SS316L and Titanium
Plate Geometry: Narrow elongated fixation plate with repeated longitudinal openings
Fixation Concept: Plate-and-screw internal fixation using a compatible orthopedic fixation system
Side-Specific Design: Not specified
Cat. No.: Not supplied
GTIN No.: Not supplied
Plate Dimensions: Not supplied
Specific Titanium Grade: Not supplied
Specific Screw Compatibility: Not supplied
Product Features
- Locking orthopedic fixation plate design.
- Specifically identified as a One Third Plate.
- Associated with a 3.5 mm fixation system.
- Alignment is not specified in the supplied product data.
- No numerical head-hole count is specified.
- Available with 4 shaft holes.
- Available with 5 shaft holes.
- Available with 6 shaft holes.
- Available with 7 shaft holes.
- Available with 8 shaft holes.
- Available with 9 shaft holes.
- Available with 10 shaft holes.
- Available with 12 shaft holes.
- Provides eight shaft-hole configurations.
- Available in SS316L.
- Available in Titanium.
- Features a narrow elongated plate profile.
- Includes multiple longitudinal fixation openings.
- Supports multiple potential plate-length configurations.
- Exact anatomical indication should be confirmed from official documentation.
- Exact dimensional definition of the One Third configuration should be confirmed from the manufacturer’s technical drawings.
- Exact compatible screw types and diameters should be confirmed from the product system documentation.
- Exact locking characteristics and hole functions should be confirmed from approved technical documentation.
- Exact plate lengths, width, thickness, and curvature should be confirmed from the manufacturer’s dimensional specifications.
- Individual Cat. No. and GTIN No. should be added when the official product table is available.
Approved indications, contraindications, and surgical technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.