Product Explanation
The Locking Bone Compression Plate Broad, 5.0 mm is an orthopedic fixation plate intended to form part of a compatible internal fixation construct.
A simplified fixation concept can be represented as:
Prepared Bone → Broad Locking Bone Compression Plate → Compatible Fixation Screws → Internal Fixation Construct
The product is specifically identified as a:
Bone Compression Plate
with a:
Broad
configuration.
According to the supplied product information, the plate family is available with:
4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 14 / 16 Shaft Holes
providing a broad range of plate configurations.
The exact anatomical site and approved clinical indications are not stated in the supplied image and should therefore be confirmed from the manufacturer’s official documentation.
Product Components and Design
- Broad Compression Plate Body
The implant consists of an elongated metallic fixation plate with multiple fixation openings distributed along its longitudinal axis.
The product is specifically identified as a:
Locking Bone Compression Plate Broad
according to the supplied product title.
The supplied image shows a relatively wide, straight plate profile.
The exact width, length, thickness, curvature, and anatomical relationship are not provided in the supplied data.
- Broad Configuration
The product designation includes:
Broad
indicating a wider plate configuration within the bone compression plate family.
The exact physical width or dimensional criteria defining the Broad version are not provided in the supplied image.
Therefore, any comparison with Small, Narrow, or other plate configurations should be based on the manufacturer’s technical drawings rather than visual estimation.
- Compression Plate Configuration
The product is specifically identified as:
Locking Bone Compression Plate
This indicates a compression-plate product family incorporating a locking fixation concept.
However, the exact compression mechanism, hole geometry, permitted screw positioning, and locking characteristics are not defined in the supplied image and should be confirmed from the official technical documentation.
- Shaft Section
According to the supplied product information, the plate is available with:
4 Shaft Holes
5 Shaft Holes
6 Shaft Holes
7 Shaft Holes
8 Shaft Holes
9 Shaft Holes
10 Shaft Holes
11 Shaft Holes
12 Shaft Holes
14 Shaft Holes
16 Shaft Holes
This provides 11 listed shaft-hole configurations within the product family.
The exact physical plate length corresponding to each configuration is not supplied.
- Head-Hole Configuration
The supplied product data states:
Head Holes: –
Therefore, no separately defined numerical head-hole configuration is specified.
This is consistent with the plate’s elongated geometry and lack of a clearly differentiated anatomical head section in the supplied data.
- Multiple Fixation Opening Geometries
The supplied product image visually shows multiple fixation openings distributed along the plate.
These include:
- Circular openings.
- Elongated / contoured openings.
- Repeated longitudinal fixation positions.
The exact role of each opening—such as locking fixation, conventional fixation, compression, neutral positioning, or another function—is not specified in the supplied image and should be confirmed from the approved surgical technique.
- Material Options
According to the supplied product information, the plate is available in:
SS316L
and
Titanium
The exact Titanium grade or alloy is not specified in the supplied image and should be confirmed from the manufacturer’s official material specification.
Intended Use
The Locking Bone Compression Plate Broad, 5.0 mm is designed for use as part of a compatible orthopedic fixation system according to the approved indications, surgical technique, and Instructions for Use.
The supplied image does not specify a particular anatomical region.
Potential use should therefore be described only generally as orthopedic plate fixation in procedures where the Broad 5.0 mm compression plate is included within the manufacturer’s approved indications.
The exact anatomical applications, fracture classifications, surgical approach, compression technique, contraindications, and patient-selection criteria should be confirmed from the official product documentation.
Plate selection may depend on factors including:
- Anatomical location.
- Bone dimensions.
- Fracture location and configuration.
- Required fixation construct.
- Required compression strategy.
- Required plate width.
- Required shaft-hole configuration.
- Required plate length.
- Bone quality.
- Compatible screw selection.
- Compatible instrumentation.
- Surgical approach.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified orthopedic surgeon in accordance with the approved surgical technique and Instructions for Use.
Key Benefits
Broad Plate Configuration
The product is specifically identified as:
Broad
providing a wider plate configuration within the compatible bone compression plate family.
The exact dimensional difference between Broad and other configurations should be confirmed from the manufacturer’s technical drawings.
Broad Range of Shaft-Hole Options
The product family includes:
4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 14 / 16 Shaft Holes
providing a broad selection of plate configurations.
This supports selection among different plate variants according to fixation requirements and surgical planning.
Locking Compression Plate Design
The product is specifically identified as a:
Locking Bone Compression Plate
combining a locking plate designation with a compression plate configuration.
The exact locking and compression characteristics should be confirmed from the manufacturer’s technical documentation.
5.0 mm Fixation System
The product is identified as:
Locking Bone Compression Plate Broad, 5.0 mm
indicating its association with a compatible 5.0 mm orthopedic fixation system.
The exact compatible screw type, screw diameter, and hole-specific function should be confirmed from the manufacturer’s system documentation.
Two Material Options
According to the supplied product information, the plate is available in:
SS316L
and
Titanium
Multiple Plate-Length Configurations
The available shaft-hole options:
4 → 5 → 6 → 7 → 8 → 9 → 10 → 11 → 12 → 14 → 16
indicate multiple plate variants within the product family.
The corresponding physical plate lengths are not provided and should be confirmed from the official dimensional specifications.
Multiple Product Variants
Based strictly on the supplied product data, the family includes:
- 1 plate configuration: Broad
- No numerical head-hole configuration specified
- 11 shaft-hole options: 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 14 / 16
- 2 material options: SS316L / Titanium
If every shaft-hole configuration is available in both materials, this could represent up to 22 basic shaft × material combinations.
The exact number of commercially available variants should be confirmed from the official Cat. No. table.
Technical Specifications
| Specification | Product Data |
| Product Name | Locking Bone Compression Plate Broad, 5.0 mm |
| Product Category | Orthopedic Fixation |
| Product Type | Locking Bone Compression Plate |
| Plate Configuration | Broad |
| Anatomical Region | Not specified |
| System Size | 5.0 mm |
| Alignment / Configuration | Supplied as “Board”; likely intended as Broad |
| Head Holes | Not specified |
| Shaft Hole Options | 4, 5, 6, 7, 8, 9, 10, 11, 12, 14, 16 |
| Number of Shaft-Hole Options | 11 |
| Materials | SS316L, Titanium |
| Potential Basic Configurations | Up to 22, subject to catalog confirmation |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
| Plate Lengths | Not provided |
| Plate Width | Not provided |
| Plate Thickness | Not provided |
| Compression Hole Geometry | Not provided |
| Compatible Screw Details | Not provided |
| Locking Mechanism Details | Not provided |
| Titanium Grade | Not provided |
| Compatible Instrumentation | Not provided |
Technical Overview
Product Name: Locking Bone Compression Plate Broad, 5.0 mm
Product Category: Orthopedic Fixation
Product Type: Locking Bone Compression Plate
Plate Configuration: Broad
Anatomical Region: Not specified
System: 5.0 mm
Alignment: Supplied as “Board”; likely a configuration field rather than anatomical alignment
Head Holes: Not specified
Shaft Hole Options: 4, 5, 6, 7, 8, 9, 10, 11, 12, 14, and 16
Material Options: SS316L and Titanium
Plate Geometry: Broad elongated fixation plate with repeated fixation openings
Fixation Concept: Plate-and-screw internal fixation using a compatible orthopedic fixation system
Compression Concept: Identified as Bone Compression Plate; exact mechanism not supplied
Side-Specific Design: Not specified
Cat. No.: Not supplied
GTIN No.: Not supplied
Plate Lengths: Not supplied
Plate Width: Not supplied
Plate Thickness: Not supplied
Specific Titanium Grade: Not supplied
Specific Screw Compatibility: Not supplied
Product Features
- Locking orthopedic fixation plate design.
- Specifically identified as a Bone Compression Plate.
- Identified as the Broad configuration.
- Associated with a 5.0 mm fixation system.
- No numerical head-hole count is specified in the supplied product data.
- Available with 4 shaft holes.
- Available with 5 shaft holes.
- Available with 6 shaft holes.
- Available with 7 shaft holes.
- Available with 8 shaft holes.
- Available with 9 shaft holes.
- Available with 10 shaft holes.
- Available with 11 shaft holes.
- Available with 12 shaft holes.
- Available with 14 shaft holes.
- Available with 16 shaft holes.
- Provides 11 shaft-hole configurations.
- Available in SS316L.
- Available in Titanium.
- Features a broad elongated plate body.
- Includes multiple longitudinal fixation openings.
- Includes circular openings visible in the supplied image.
- Includes elongated / contoured openings visible in the supplied image.
- Supports a broad range of potential plate-length variants.
- Exact anatomical indication should be confirmed from official documentation.
- Exact dimensional definition of the Broad configuration should be confirmed from the manufacturer’s technical drawings.
- Exact compression-hole functionality should be confirmed from the manufacturer’s technical documentation.
- Exact locking mechanism and compatible screw specifications should be confirmed from the product system documentation.
- Exact plate lengths, width, and thickness should be confirmed from the manufacturer’s dimensional specifications.
- Individual Cat. No. and GTIN No. should be added when the official product table is available.
- Approved indications, contraindications, and surgical technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.