Product Explanation
The Locking Olecranon Plate, 3.5 mm is an orthopedic fixation plate intended to form part of a compatible internal fixation construct involving the olecranon and proximal ulna region.
A simplified fixation concept can be represented as:
Olecranon / Proximal Ulna → Locking Olecranon Plate → Compatible Fixation Screws → Internal Fixation Construct
The plate is selected and positioned according to the anatomical side, olecranon and proximal ulna anatomy, fracture configuration, required fixation construct, plate length, surgical plan, approved surgical technique, and Instructions for Use.
According to the supplied product information, the plate is available in:
Left / Right
configurations.
The product family includes:
2 / 4 / 6 / 8 / 10 / 12 / 14 Shaft Holes
providing multiple plate configurations within the same product family.
No numerical Head Holes specification is provided in the supplied table.
Product Components and Design
- Olecranon Plate Body
The implant consists of an elongated metallic fixation plate with a broadened and contoured proximal section.
The product is specifically identified as an:
Olecranon Plate
according to the supplied product designation.
The proximal region visibly has a different geometry from the elongated shaft, consistent with the plate’s stated anatomical designation.
The exact anatomical contour, plate curvature, dimensions, width, thickness, and plate-to-bone relationship should be confirmed from the manufacturer’s technical drawings.
- Proximal Olecranon Fixation Section
The proximal portion of the plate is broadened and visibly incorporates multiple fixation openings.
However, the supplied product data states:
Head Holes: –
Therefore, no numerical head-hole count is officially specified.
The exact number, classification, compatible screw type, locking interface, and screw trajectory associated with the proximal openings should be confirmed from the manufacturer’s technical documentation.
- Contoured Proximal Geometry
The supplied image shows a distinctly contoured proximal plate section.
This region appears to transition around the anatomical end of the plate rather than continuing as a completely straight longitudinal structure.
The exact contour radius, bend angle, hook geometry, offset, and anatomical relationship should not be inferred from the image alone and should be obtained from the official engineering drawing.
- Shaft Section
According to the supplied product data, the plate is available with:
2 Shaft Holes
4 Shaft Holes
6 Shaft Holes
8 Shaft Holes
10 Shaft Holes
12 Shaft Holes
14 Shaft Holes
This provides seven shaft-hole configurations within the product family.
The exact physical plate length corresponding to each shaft-hole configuration is not provided.
- Multiple Fixation Opening Geometries
The supplied image visually shows several types of fixation openings distributed along the plate.
These include:
- Multiple proximal fixation openings.
- Circular openings.
- Elongated / contoured shaft openings.
- Multiple longitudinal fixation positions.
The exact function of each opening—such as locking fixation, conventional fixation, compression, positioning, or another role—is not defined in the supplied product data and should be confirmed from the approved surgical technique.
- Left and Right Configurations
According to the supplied product information, the plate is available in:
Left / Right
alignment options.
This indicates side-specific plate variants.
The exact geometric differences between the Left and Right configurations should be confirmed from the manufacturer’s technical drawings.
- Material Options
According to the supplied product information, the plate is available in:
SS316L
and
Titanium
The exact Titanium alloy or grade is not specified in the supplied image and should be confirmed from the manufacturer’s material specification.
Intended Use
The Locking Olecranon Plate, 3.5 mm is designed for use as part of a compatible orthopedic fixation system involving the olecranon / proximal ulna region, according to the approved indications, surgical technique, and Instructions for Use.
Potential applications may involve internal fixation in the olecranon or proximal ulna region where this plate configuration is included within the manufacturer’s approved indications.
The exact fracture types, fracture classifications, anatomical indications, surgical approach, fixation strategy, contraindications, and patient-selection criteria should be confirmed from the official product documentation.
Plate selection may depend on factors including:
- Anatomical side.
- Olecranon anatomy.
- Proximal ulna anatomy.
- Fracture location and configuration.
- Required fixation construct.
- Required plate length.
- Required shaft-hole configuration.
- Bone dimensions.
- Bone quality.
- Compatible screw selection.
- Screw trajectory requirements.
- Compatible instrumentation.
- Surgical approach.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified orthopedic surgeon in accordance with the approved surgical technique and Instructions for Use.
Key Benefits
Olecranon-Specific Plate Configuration
The product is specifically identified as a:
Locking Olecranon Plate
providing a dedicated plate configuration within a compatible proximal ulna fixation system.
The exact anatomical and biomechanical role should be confirmed from the manufacturer’s approved technical documentation.
Left and Right Anatomical Options
The plate is available in:
Left / Right
configurations, supporting side-specific implant selection.
Seven Shaft-Hole Configurations
The product family includes:
2 / 4 / 6 / 8 / 10 / 12 / 14 Shaft Holes
providing seven different shaft configurations.
This supports selection among multiple plate variants according to the required fixation construct and surgical plan.
3.5 mm Fixation System
The product is identified as:
Locking Olecranon Plate, 3.5 mm
indicating its association with a compatible 3.5 mm orthopedic fixation system.
The exact compatible screw types and whether all plate openings use the same screw specification should be confirmed from the manufacturer’s technical documentation.
Two Material Options
According to the supplied product data, the plate is available in:
SS316L
and
Titanium
Broad Plate-Length Range
The available shaft-hole options:
2 → 4 → 6 → 8 → 10 → 12 → 14
indicate multiple plate variants within the same family.
The exact corresponding plate lengths are not supplied and should be confirmed from the official dimensional table.
Multiple Product Variants
Based strictly on the supplied product information, the family includes:
- 2 alignment options: Left / Right
- No numerical head-hole configuration specified
- 7 shaft-hole options: 2 / 4 / 6 / 8 / 10 / 12 / 14
- 2 material options: SS316L / Titanium
If every shaft-hole configuration is available in both alignments and both materials, this could represent up to 28 basic alignment × shaft × material combinations.
However, the supplied image does not provide the complete commercial configuration matrix. The exact number of available variants should therefore be confirmed from the official Cat. No. table.
Technical Specifications
| Specification | Product Data |
| Product Name | Locking Olecranon Plate, 3.5 mm |
| Product Category | Trauma |
| Product Type | Locking Orthopedic Fixation Plate |
| Plate Configuration | Olecranon Plate |
| Anatomical Region | Olecranon / Proximal Ulna |
| System Size | 3.5 mm |
| Alignment | Left, Right |
| Head Holes | Not specified |
| Shaft Hole Options | 2, 4, 6, 8, 10, 12, 14 |
| Materials | SS316L, Titanium |
| Potential Basic Configurations | Up to 28, subject to catalog confirmation |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
| Plate Lengths | Not provided |
| Proximal Plate Width | Not provided |
| Plate Thickness | Not provided |
| Proximal Contour / Bend Geometry | Not provided |
| Compatible Screw Details | Not provided |
| Screw Trajectories | Not provided |
| Titanium Grade | Not provided |
| Compatible Instrumentation | Not provided |
Technical Overview
Product Name: Locking Olecranon Plate, 3.5 mm
Product Category: Trauma
Product Type: Locking Orthopedic Fixation Plate
Plate Type: Olecranon Plate
Anatomical Region: Olecranon / Proximal Ulna
System: 3.5 mm
Alignment Options: Left and Right
Head Holes: Not specified
Shaft Hole Options: 2, 4, 6, 8, 10, 12, and 14
Material Options: SS316L and Titanium
Plate Geometry: Contoured proximal fixation section with elongated shaft
Fixation Concept: Plate-and-screw internal fixation using a compatible orthopedic fixation system
Side-Specific Design: Yes — Left / Right
Cat. No.: Not supplied
GTIN No.: Not supplied
Plate Lengths: Not supplied
Plate Thickness: Not supplied
Specific Titanium Grade: Not supplied
Specific Screw Compatibility: Not supplied
Product Features
- Locking orthopedic fixation plate design.
- Specifically identified as an Olecranon Plate.
- Associated with a 3.5 mm fixation system.
- Designed within an olecranon / proximal ulna fixation product family.
- Available in Left and Right configurations.
- No numerical head-hole specification is provided in the supplied product data.
- Available with 2 shaft holes.
- Available with 4 shaft holes.
- Available with 6 shaft holes.
- Available with 8 shaft holes.
- Available with 10 shaft holes.
- Available with 12 shaft holes.
- Available with 14 shaft holes.
- Provides seven shaft-hole configurations.
- Available in SS316L.
- Available in Titanium.
- Features a broadened and contoured proximal section.
- Features an elongated longitudinal shaft.
- Includes multiple visible proximal fixation openings.
- Includes circular openings visible in the supplied product image.
- Includes elongated / contoured shaft openings visible in the supplied image.
- Supports side-specific implant selection.
- Supports multiple potential plate-length configurations.
- Exact proximal head-hole count and classification should be confirmed from official technical documentation.
- Exact compatible screw types and diameters should be confirmed from the manufacturer’s system documentation.
- Exact screw trajectories and locking characteristics should be confirmed from the approved technical drawings.
- Exact plate lengths, proximal contour, width, and thickness should be confirmed from the manufacturer’s dimensional specifications.
- Individual Cat. No. and GTIN No. should be added when the official product table is available.
- Approved indications, contraindications, and surgical technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.