Product Explanation
The Locking Reconstruction Plate Round Hole, 3.5 mm is an orthopedic fixation plate intended to form part of a compatible internal fixation construct.
A simplified fixation concept can be represented as:
Prepared Bone → Locking Reconstruction Plate → Compatible Fixation Screws → Internal Fixation Construct
The product is specifically identified as a:
Reconstruction Plate
with:
Round Holes
according to the supplied product designation.
The supplied image places the product within the:
Trauma – Clavicle
catalog category.
However, the exact anatomical indication of this reconstruction plate should be confirmed from the manufacturer’s official documentation rather than inferred solely from the catalog header.
According to the supplied product information, the plate is available over a shaft-hole range of:
4 to 24 Holes
providing multiple possible plate-length configurations.
Product Components and Design
- Reconstruction Plate Body
The implant consists of an elongated metallic fixation plate with multiple fixation openings distributed longitudinally along the plate.
The product is specifically identified as a:
Locking Reconstruction Plate
according to the supplied product name.
The exact length, width, thickness, contourability, curvature, and anatomical positioning are not provided in the supplied image and should be confirmed from the manufacturer’s technical drawings.
- Round-Hole Configuration
The product is specifically identified as:
Round Hole
and the supplied data lists:
Alignment: Round
The term Round appears more consistent with the hole configuration / plate design than with anatomical alignment.
Therefore, for a final technical product sheet, the safer terminology would be:
Hole Configuration: Round
rather than treating “Round” as an anatomical alignment, unless the manufacturer’s master catalog explicitly defines it otherwise.
- Shaft Hole Range
According to the supplied product data:
Shaft Holes: 4 to 24
This indicates a broad range of shaft-hole configurations within the product family.
The image does not state whether every integer count from 4 through 24 is commercially available or whether only selected counts within that range are offered.
Therefore, the exact available configurations should be confirmed from the official Cat. No. table.
- Head-Hole Configuration
The supplied product data states:
Head Holes: –
Therefore, no separate head-hole count is specified.
This is consistent with the supplied image showing an elongated reconstruction plate without a clearly differentiated anatomical head section.
- Multiple Round Fixation Openings
The supplied product image visually shows numerous round fixation openings distributed along the plate body.
The exact function of these openings—including whether each opening is locking, conventional, compression-capable, or another fixation type—is not defined in the supplied product image.
These characteristics should be confirmed from the manufacturer’s approved technical documentation and surgical technique.
- Reconstruction Geometry
The plate has a longitudinal reconstruction-type configuration with repeated structural segments between adjacent openings.
The exact mechanical characteristics, including any intended contouring capability or bending characteristics, are not provided in the supplied image and should not be assumed from the word Reconstruction alone.
- Material Options
According to the supplied product information, the plate is available in:
SS316L
and
Titanium
The exact Titanium alloy or grade is not specified and should be confirmed from the manufacturer’s official material specification.
Intended Use
The Locking Reconstruction Plate Round Hole, 3.5 mm is designed for use as part of a compatible orthopedic fixation system according to the approved indications, surgical technique, and Instructions for Use.
The supplied image places the product within the Trauma – Clavicle category, but it does not provide a detailed anatomical indication or approved fracture classification.
Potential use should therefore be described only within the scope of the manufacturer’s approved indications.
The exact anatomical location, fracture types, surgical approach, fixation strategy, plate contouring requirements, contraindications, and patient-selection criteria should be confirmed from the official product documentation.
Plate selection may depend on factors including:
- Anatomical location.
- Bone anatomy.
- Fracture location and configuration.
- Required fixation construct.
- Required plate length.
- Required number of fixation holes.
- Bone dimensions.
- Bone quality.
- Compatible screw selection.
- Compatible instrumentation.
- Plate contour requirements.
- Preoperative planning.
- Intraoperative assessment.
The implant should be selected and implanted by a qualified orthopedic surgeon in accordance with the approved surgical technique and Instructions for Use.
Key Benefits
Broad Shaft-Hole Range
The product family is specified with:
4 to 24 Shaft Holes
providing a broad plate-size range.
The exact commercially available intermediate hole counts should be confirmed from the official catalog.
Round-Hole Configuration
The product is specifically identified as:
Round Hole
providing a defined opening geometry within the reconstruction plate family.
The exact locking and screw-interface characteristics of these holes should be confirmed from the manufacturer’s documentation.
Reconstruction Plate Design
The product is identified as a:
Locking Reconstruction Plate
providing a distinct elongated plate configuration within a compatible orthopedic fixation system.
The exact reconstruction and contouring characteristics should be verified from the manufacturer’s technical specifications.
3.5 mm Fixation System
The product is identified as:
Locking Reconstruction Plate Round Hole, 3.5 mm
indicating its association with a compatible 3.5 mm orthopedic fixation system.
The exact compatible screw type and locking interface should be confirmed from the manufacturer’s system documentation.
Two Material Options
According to the supplied product data, the plate is available in:
SS316L
and
Titanium
Multiple Plate-Length Options
The stated shaft-hole range of:
4 to 24
indicates a broad selection of possible plate lengths/configurations.
However, because the source does not list each individual configuration, the total number of product variants should not be calculated until the official Cat. No. table is available.
Technical Specifications
| Specification | Product Data |
| Product Name | Locking Reconstruction Plate Round Hole, 3.5 mm |
| Product Category | Trauma – Clavicle |
| Product Type | Locking Reconstruction Plate |
| Hole Configuration | Round Hole |
| Anatomical Region | Clavicle category; exact indication not specified |
| System Size | 3.5 mm |
| Alignment | Listed as “Round” in supplied data |
| Head Holes | Not specified |
| Shaft Hole Range | 4 to 24 |
| Materials | SS316L, Titanium |
| Individual Hole Variants | Not specified |
| Cat. No. | Not provided |
| GTIN No. | Not provided |
| Plate Lengths | Not provided |
| Plate Width | Not provided |
| Plate Thickness | Not provided |
| Hole Diameter / Geometry Details | Not provided |
| Compatible Screw Details | Not provided |
| Locking Mechanism Details | Not provided |
| Titanium Grade | Not provided |
| Compatible Instrumentation | Not provided |
Technical Overview
Product Name: Locking Reconstruction Plate Round Hole, 3.5 mm
Product Category: Trauma – Clavicle
Product Type: Locking Reconstruction Plate
Plate Configuration: Round-Hole Reconstruction Plate
System: 3.5 mm
Anatomical Region: Listed under Clavicle; exact approved anatomical indication not specified
Alignment: Supplied as “Round”
Recommended Classification of “Round”: Hole Configuration
Head Holes: Not specified
Shaft Hole Range: 4 to 24
Material Options: SS316L and Titanium
Plate Geometry: Elongated reconstruction-type fixation plate with repeated round openings
Fixation Concept: Plate-and-screw internal fixation using a compatible orthopedic fixation system
Side-Specific Design: Not specified
Cat. No.: Not supplied
GTIN No.: Not supplied
Plate Lengths: Not supplied
Plate Thickness: Not supplied
Specific Titanium Grade: Not supplied
Specific Screw Compatibility: Not supplied
Product Features
- Locking orthopedic fixation plate design.
- Specifically identified as a Reconstruction Plate.
- Specifically identified with Round Holes.
- Included in the supplied Trauma – Clavicle catalog category.
- Associated with a 3.5 mm fixation system.
- Shaft-hole range listed as 4 to 24.
- No numerical head-hole specification is provided.
- No Left / Right side-specific configuration is specified.
- Available in SS316L.
- Available in Titanium.
- Features an elongated reconstruction plate body.
- Features repeated round fixation openings.
- Provides a broad range of potential plate-length configurations.
- Exact individual hole-count variants between 4 and 24 should be confirmed from the official catalog.
- Exact anatomical indication should be confirmed from official documentation.
- Exact reconstruction / contouring characteristics should be confirmed from the manufacturer’s technical documentation.
- Exact locking mechanism and compatible screw specifications should be confirmed from the product system documentation.
- Exact plate lengths, width, and thickness should be confirmed from the manufacturer’s dimensional specifications.
- Individual Cat. No. and GTIN No. should be added when the official product table is available.
Approved indications, contraindications, and surgical technique should be confirmed from the manufacturer’s Instructions for Use (IFU).
Reviews
There are no reviews yet.