Pira Mesh (180 MM)

The Pira Mesh (180 mm) is a titanium spinal reconstruction implant designed for integration within compatible spinal reconstruction and stabilization systems according to the manufacturer’s approved indications, Surgical Technique, and Instructions for Use.

The implant features an elongated open lattice / mesh geometry incorporating multiple apertures throughout its body. This perforated structural configuration allows the implant to function as a reconstruction component within compatible spinal constructs while providing multiple length options for different anatomical and reconstruction requirements.

According to the supplied catalog:

Material: Titanium
General Cat. No.: AMS 518.180.000
Product Designation: Pira Mesh (180 mm)

The supplied table visibly lists configurations ranging from 12 mm to 68 mm, progressing in regular 2 mm increments. This provides 29 listed variants for implant selection according to factors such as spinal anatomy, vertebral defect dimensions, reconstruction level, required implant length, adjacent vertebral geometry, and intraoperative assessment.

Each configuration carries a dedicated Cat. No. and GTIN No., supporting accurate implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.

Product Explanation

The Pira Mesh is a titanium mesh-type spinal implant intended to serve as a structural element within a compatible spinal reconstruction construct.

A simplified reconstruction concept can be represented as:

Spinal Reconstruction Site → Pira Mesh → Compatible Supplemental Fixation → Spinal Reconstruction Construct

The open lattice structure forms the primary geometry of the implant, with multiple apertures incorporated throughout its length.

Where included within the manufacturer’s approved technique, mesh-type spinal implants may be used together with compatible graft material and supplemental spinal fixation components.

Product Components and Design

1. Titanium Mesh Body

The principal implant structure is manufactured from Titanium, according to the supplied catalog data.

2. Open Lattice / Perforated Structure

The implant contains multiple interconnected openings distributed throughout its body, creating a characteristic open mesh geometry.

The supplied catalog does not specify:

• Aperture dimensions
• Aperture spacing
• Open-area percentage
• Mesh strand dimensions
• Wall thickness

3. Elongated Reconstruction Profile

The product has an elongated structural configuration designed to accommodate multiple listed implant lengths.

4. Tubular / Mesh-Type Geometry

The supplied product image shows a tubular or channel-like mesh structure with a repeating lattice pattern.

Its exact transverse dimensions are not provided in the visible catalog data.

5. Terminal Geometry

The implant ends incorporate open structural features as part of the mesh design.

The precise trimming, contouring, and preparation requirements are not specified.

6. Listed Length Configurations

The supplied image shows:

12 / 14 / 16 / 18 / 20 / 22 / 24 / 26 / 28 / 30 / 32 / 34 / 36 / 38 / 40 / 42 / 44 / 46 / 48 / 50 / 52 / 54 / 56 / 58 / 60 / 62 / 64 / 66 / 68 mm

for a total of 29 visible configurations.

Intended Use

The Pira Mesh (180 mm) is intended for use within compatible spinal reconstruction systems according to the manufacturer’s approved indications and Instructions for Use.

Potential applications, where specifically included within the approved indications, may include:

• Spinal reconstruction constructs.
• Vertebral column reconstruction.
• Reconstruction of appropriate vertebral defects.
• Vertebral body reconstruction where approved.
• Integration with compatible supplemental spinal fixation components.
• Structural support within compatible spinal reconstruction procedures.

Selection of the appropriate configuration depends on:

• Spinal anatomy.
• Reconstruction level.
• Defect dimensions.
• Required reconstruction length.
• Adjacent vertebral geometry.
• Bone quality.
• Implant contact requirements.
• Supplemental fixation strategy.
• Preoperative planning.
• Intraoperative assessment.

The implant should be selected and implanted by a qualified spine surgeon according to the manufacturer’s approved Surgical Technique and IFU.

Key Benefits

Titanium Material

The supplied catalog specifies:

Material: Titanium

Open Mesh Geometry

The implant features an open lattice / perforated structure with numerous apertures throughout the implant body.

Broad Length Selection

The supplied image lists lengths from:

12 mm to 68 mm

Fine 2 MM Progression

The available configurations progress in regular:

2 mm increments

providing relatively fine dimensional selection.

29 Visible Configurations

The supplied table visibly contains:

29 individual length variants

Reconstruction-Oriented Design

The elongated mesh geometry provides a structural implant option for compatible spinal reconstruction systems.

Product Traceability

Each listed configuration has an individual Cat. No. and GTIN No. to support:

• Implant identification
• Product traceability
• Surgical set preparation
• Procurement
• Inventory management
• Stock control

Technical Specifications

Length	Cat. No.	GTIN No.
12 mm	AMS 518.180.012T	6221361017610
14 mm	AMS 518.180.014T	6221361045514
16 mm	AMS 518.180.016T	6221361017672
18 mm	AMS 518.180.018T	6221361017702
20 mm	AMS 518.180.020T	6221361017733
22 mm	AMS 518.180.022T	6221361017764
24 mm	AMS 518.180.024T	6221361017795
26 mm	AMS 518.180.026T	6221361017825
28 mm	AMS 518.180.028T	6221361017856
30 mm	AMS 518.180.030T	6221361017887
32 mm	AMS 518.180.032T	6221361017917
34 mm	AMS 518.180.034T	6221361017948
36 mm	AMS 518.180.036T	6221361017979
38 mm	AMS 518.180.038T	6221361018006
40 mm	AMS 518.180.040T	6221361018037
42 mm	AMS 518.180.042T	6221361018068
44 mm	AMS 518.180.044T	6221361018099
46 mm	AMS 518.180.046T	6221361018129
48 mm	AMS 518.180.048T	6221361018150
50 mm	AMS 518.180.050T	6221361018181
52 mm	AMS 518.180.052T	6221361018211
54 mm	AMS 518.180.054T	6221361018242
56 mm	AMS 518.180.056T	6221361018273
58 mm	AMS 518.180.058T	6221361018303
60 mm	AMS 518.180.060T	6221361018334
62 mm	AMS 518.180.062T	6221361018365
64 mm	AMS 518.180.064T	6221361045521
66 mm	AMS 518.180.066T	6221361018426
68 mm	AMS 518.180.068T	6221361018457

Technical Overview

Product Name: Pira Mesh (180 mm)
Material: Titanium
Product Type: Spinal Reconstruction Mesh
Product Category: Spinal Reconstruction Implant
General Cat. No.: AMS 518.180.000
Catalog Designation: 180 mm
Visible Listed Lengths: 12–68 mm
Length Increment: 2 mm
Number of Visible Configurations: 29
Design: Elongated Open Lattice / Perforated Mesh
Functional Role: Structural component within compatible spinal reconstruction constructs
Anatomical Application: Spine
Identification: Individual Cat. No. and GTIN No. for each listed configuration

Product Features

• Pira Mesh Spinal Reconstruction Design.
• Manufactured from Titanium according to the catalog.
• Catalog designation: 180 mm.
• Open lattice / perforated mesh geometry.
• Multiple apertures distributed throughout the implant body.
• Elongated tubular-type reconstruction structure.
• 29 configurations visible in the supplied image.
• Visible listed range from 12 to 68 mm.
• Regular 2 mm increments.
• Provides multiple dimensional options for reconstruction planning.
• Designed for integration with compatible spinal reconstruction components.
• Individual Cat. No. for every listed length.
• Individual GTIN No. for every visible configuration.
• Supports implant identification, traceability, procurement, and inventory management.