The Poly Axial Screw (6.0 mm) is a titanium spinal fixation implant designed for integration within compatible posterior spinal instrumentation systems according to the manufacturer’s approved indications and surgical technique.
The implant combines an elongated threaded bone-engagement shaft with a proximal polyaxial fixation head. The polyaxial configuration allows controlled orientation of the head relative to the screw shaft within the mechanical limits of the system, facilitating alignment with compatible spinal rods during construct assembly.
According to the supplied catalog:
Material: Titanium
General Cat. No.: AMS 501.060.000
Nominal Diameter: 6.0 mm
The screw is available in 12 lengths ranging from 25 mm to 80 mm, providing multiple implant-selection options according to vertebral anatomy, bone dimensions, fixation depth, screw trajectory, rod position, and overall construct geometry.
Each configuration carries a dedicated Cat. No. and GTIN No., supporting accurate implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.
Product Components and Design
- Titanium Screw Body
The implant is manufactured from Titanium according to the supplied product data.
- 6.0 MM Nominal Diameter
The catalog identifies the product as:
Poly Axial Screw (6 mm)
- Threaded Bone-Engagement Shaft
The screw incorporates an elongated threaded shaft designed for mechanical engagement with bone.
- Polyaxial Fixation Head
The proximal head is designed to permit controlled orientation relative to the screw shaft and to interface with compatible rods and locking components.
- Distal Tip
The distal portion forms part of the screw’s threaded fixation geometry.
- Length Configurations
Available lengths:
25 / 30 / 35 / 40 / 45 / 50 / 55 / 60 / 65 / 70 / 75 / 80 mm
Intended Use
The Poly Axial Screw (6.0 mm) is intended for use within compatible posterior spinal fixation systems according to the manufacturer’s approved Instructions for Use.
Potential applications, where included within the approved indications, may include:
- Posterior spinal stabilization.
- Screw-and-rod fixation constructs.
- Multi-level spinal instrumentation.
- Spinal reconstruction constructs.
- Spinal deformity fixation systems.
- Compatible thoracic or lumbar posterior fixation systems.
Selection of the appropriate screw configuration depends on vertebral anatomy, bone quality, fixation site, required screw depth, trajectory, rod position, construct geometry, and intraoperative assessment.
Key Benefits
- Manufactured from Titanium.
- 6.0 mm nominal diameter.
- Polyaxial head configuration.
- Threaded shaft for mechanical bone engagement.
- 12 available configurations.
- Length range from 25 to 80 mm.
- Regular 5 mm increments.
- Supports rod alignment within compatible spinal constructs.
- Provides multiple implant options for different fixation depths.
- Individual Cat. No. and GTIN No. for each length.
- Supports implant identification, traceability, procurement, and inventory management.
Technical Specifications – 6.0 MM
| Length | Cat. No. | GTIN No. |
| 25 mm | AMS 501.060.025T | 6221361018372 |
| 30 mm | AMS 501.060.030T | 6221361018402 |
| 35 mm | AMS 501.060.035T | 6221361018433 |
| 40 mm | AMS 501.060.040T | 6221361018464 |
| 45 mm | AMS 501.060.045T | 6221361018495 |
| 50 mm | AMS 501.060.050T | 6221361018525 |
| 55 mm | AMS 501.060.055T | 6221361018556 |
| 60 mm | AMS 501.060.060T | 6221361018587 |
| 65 mm | AMS 501.060.065T | 6221361018617 |
| 70 mm | AMS 501.060.070T | 6221361018648 |
| 75 mm | AMS 501.060.075T | 6221361018679 |
| 80 mm | AMS 501.060.080T | 6221361018709 |
Technical Overview – 6.0 MM
Product Name: Poly Axial Screw (6.0 mm)
Material: Titanium
Product Type: Polyaxial Spinal Fixation Screw
Product Category: Posterior Spinal Internal Fixation Implant
General Cat. No.: AMS 501.060.000
Nominal Diameter: 6.0 mm
Available Lengths: 25–80 mm
Length Increment: 5 mm
Number of Configurations: 12
Design: Threaded Screw with Polyaxial Fixation Head
Fixation Concept: Posterior Screw-and-Rod Spinal Fixation
Product Features
- 6.0 mm Polyaxial Spinal Screw Design.
- Titanium construction.
- Threaded bone-engagement shaft.
- Polyaxial proximal fixation head.
- Designed for compatible posterior spinal constructs.
- Available in 12 lengths.
- Range from 25 to 80 mm.
- Regular 5 mm increments.
- Supports different fixation-depth and rod-alignment requirements.
- Individual Cat. No. and GTIN No. for every configuration.
Short Website Product Card Description
Poly Axial Screw (6.0 mm) [Titanium] – A titanium posterior spinal fixation screw featuring a polyaxial head and threaded bone-engagement shaft, available in twelve lengths from 25 to 80 mm to support different fixation depths and compatible spinal construct geometries.
Material: Titanium
Diameter: 6.0 MM
Available Lengths: 25–80 MM
General Cat. No.: AMS 501.060.000
Poly Axial Screw (6.5 MM)
Titanium Polyaxial Spinal Fixation Screw | Lengths 25–80 MM | Cat. No. AMS 501.065.000
Short Marketing Description
The Poly Axial Screw (6.5 mm) is a titanium posterior spinal fixation screw featuring a polyaxial head and threaded bone-engagement shaft, available in twelve lengths from 25 to 80 mm to support different anatomical, fixation-depth, and construct requirements.
- Manufactured from Titanium according to the supplied catalog data.
- 6.5 mm Polyaxial Screw Design intended for compatible posterior spinal fixation systems.
- Available in 12 lengths from 25 to 80 mm, in regular 5 mm increments.
- Each configuration carries an individual Cat. No. and GTIN No. for implant identification and traceability.
Long Product Description
The Poly Axial Screw (6.5 mm) is a titanium spinal fixation implant designed for compatible posterior spinal stabilization systems.
The implant features a threaded shaft for mechanical bone engagement combined with a proximal polyaxial fixation head. This head configuration permits controlled orientation relative to the screw shaft within the limits of the corresponding fixation system, supporting alignment with compatible spinal rods during construct assembly.
According to the supplied catalog:
Material: Titanium
General Cat. No.: AMS 501.065.000
Nominal Diameter: 6.5 mm
The product is available in 12 lengths from 25 mm to 80 mm, allowing implant selection according to vertebral anatomy, bone dimensions, fixation depth, screw trajectory, rod position, and planned construct geometry.
Each configuration has a dedicated Cat. No. and GTIN No., supporting implant identification, product traceability, surgical set preparation, procurement, inventory management, and stock control.
Product Components and Design
The screw incorporates:
- Titanium implant body.
- 6.5 mm nominal screw configuration.
- Threaded bone-engagement shaft.
- Distal fixation tip.
- Polyaxial proximal head.
- Interface for compatible rod and locking components.
The exact polyaxial angular range and compatible rod / locking specifications are not provided in the supplied catalog.
Intended Use
The Poly Axial Screw (6.5 mm) is intended for compatible posterior spinal fixation systems according to the approved indications and IFU.
Potential applications, where approved, may include:
- Posterior spinal stabilization.
- Screw-and-rod fixation constructs.
- Multi-level posterior instrumentation.
- Spinal reconstruction.
- Spinal deformity correction constructs.
- Compatible thoracic and lumbar posterior fixation systems.
Selection of the appropriate configuration depends on vertebral anatomy, bone quality, fixation depth, screw trajectory, fixation level, rod position, and construct requirements.
Key Benefits
- Manufactured from Titanium.
- 6.5 mm nominal diameter.
- Polyaxial head configuration.
- Threaded shaft for mechanical bone engagement.
- 12 available configurations.
- Length range: 25–80 mm.
- Regular 5 mm increments.
- Supports rod alignment within compatible spinal fixation constructs.
- Multiple screw-length options for different fixation requirements.
- Individual Cat. No. and GTIN No. for every configuration.
- Supports implant traceability and inventory management.
Technical Specifications – 6.5 MM
| Length | Cat. No. | GTIN No. |
| 25 mm | AMS 501.065.025T | 6221361018730 |
| 30 mm | AMS 501.065.030T | 6221361018761 |
| 35 mm | AMS 501.065.035T | 6221361018792 |
| 40 mm | AMS 501.065.040T | 6221361018822 |
| 45 mm | AMS 501.065.045T | 6221361018853 |
| 50 mm | AMS 501.065.050T | 6221361018884 |
| 55 mm | AMS 501.065.055T | 6221361018914 |
| 60 mm | AMS 501.065.060T | 6221361018945 |
| 65 mm | AMS 501.065.065T | 6221361018976 |
| 70 mm | AMS 501.065.070T | 6221361019003 |
| 75 mm | AMS 501.065.075T | 6221361019034 |
| 80 mm | AMS 501.065.080T | 6221361019065 |
Technical Overview – 6.5 MM
Product Name: Poly Axial Screw (6.5 mm)
Material: Titanium
Product Type: Polyaxial Spinal Fixation Screw
Product Category: Posterior Spinal Internal Fixation Implant
General Cat. No.: AMS 501.065.000
Nominal Diameter: 6.5 mm
Available Lengths: 25–80 mm
Length Increment: 5 mm
Number of Configurations: 12
Design: Threaded Screw with Polyaxial Fixation Head
Fixation Concept: Posterior Screw-and-Rod Spinal Fixation
Product Features
- 6.5 mm Polyaxial Spinal Screw Design.
- Manufactured from Titanium.
- Threaded shaft for bone engagement.
- Polyaxial proximal fixation head.
- Designed for compatible posterior spinal constructs.
- Available in 12 lengths.
- Range from 25 to 80 mm.
- Regular 5 mm increments.
- Supports different fixation-depth and rod-alignment requirements.
- Individual Cat. No. and GTIN No. for every configuration.
Reviews
There are no reviews yet.